NeonOn19s-01 R/T - Clearing CEL codes.....

NeonOn19s · Post by **NeonOn19s** » Sat Apr 10, 2010 1:15 pm

Well here is an update....

With a heat gun, small screwdriver, and a few cuts on the hand...

I was able to get the black gunk off the lense.

then I sanded down the reflectors and preped them for primer.

Finished the primer side...

waiting 30 mins for the primer to set and then going to lay the first layer of semi gloss....

z3roneo · Post by **z3roneo** » Sat Apr 10, 2010 4:48 pm

I knew you can do it... Looking mean bro..

Can't wait to see them done and installed..

NeonOn19s · Post by **NeonOn19s** » Sat Apr 10, 2010 11:23 pm

z3roneo wrote:I knew you can do it... Looking mean bro..

Can't wait to see them done and installed..

Me too. well I didn't get back to the lights today, but Matt and I got a lot done on the car today. Here we go on the pics...

Car is moved to the 3rd garage bay...

Exhaust mocked up again and installed. I still need to get a gasket for the flange near the muffler.

Relocated the return line..

Hacked up the hot side piping to make it work properly on the 2.0L

Another mock fit of the cold air and the J-bend for the cold side. Also thinking of relocating the computer to where the battery is.

Mocked up bracket and sealed hot side for the time being.

Oh and here is the White beast out in the sun... getting moved around for now.

Will have more pics tomorrow of the lights..

NeonOn19s · Post by **NeonOn19s** » Mon Apr 12, 2010 10:09 am

Well on Sunday I didn't get to work on the car at all, but I was able to put 2 nice coats of semi-gloss paint on the light housings. I let them dry over night. I'm trying to figure out if I should run the halo's or not. If I do, then I need to make another hole in the housings. I might just do it anyways, just incase I get tired of the lights maybe someone else will want them...

I will get some pics tonight of the housings drilled, and mocked up again. I will then need to align the cut off lines when I'm at the car again.

Ntyvirus1 · Post by **Ntyvirus1** » Mon Apr 12, 2010 10:12 am

think u need a horizontal door mod, but other then that everything is lookin good.

dtjackten · Post by **dtjackten** » Mon Apr 12, 2010 10:17 am

car is coming along great nate, i love the color of ur car! also looks like u change the return to like how i have mine set up? i like it that way, it is alot cleaner looking when the car is all set, and the line is not close to the turbo/heat either....

NeonOn19s · Post by **NeonOn19s** » Mon Apr 12, 2010 1:27 pm

Ntyvirus1 wrote:think u need a horizontal door mod, but other then that everything is lookin good.

I kinda like it, plus it was a gift from my wife during the last body work and its welded to the car.

Dave-

yea Matt thought it might be better to move it. so are are looking into a couple locations at the moment. We are looking at mounting the BEGI in the cowling area to really keep it away from the heat. We are going to figure out where the best place will be.

dtjackten · Post by **dtjackten** » Mon Apr 12, 2010 1:37 pm

passenger side interfender for the win!!!! that is where mine was mounted when i had one.... worked well!

like this...

NeonOn19s · Post by **NeonOn19s** » Mon Apr 12, 2010 2:00 pm

yea but then I have remove AC... that isn't an option being in Texas....

dtjackten · Post by **dtjackten** » Mon Apr 12, 2010 2:12 pm

lol, that is true.... just drive with ur windows down, and make sure not to get caught in traffic.... lol

NeonOn19s · Post by **NeonOn19s** » Mon Apr 12, 2010 2:20 pm

I do that already, but when its 110 out.. l like my windows closed... lol

plus if we can fit it in the area where the wiper motors are at, I will only need to adjust a couple of time... so once its set I won't need to mess with it.. well that is the plan.. LOL

theTeejmiester · Post by **theTeejmiester** » Mon Apr 12, 2010 3:39 pm

my question is-have you ever driven this car on a regular basis?? cannot ever recall a shot of it not in your garage over the last couple years

NeonOn19s · Post by **NeonOn19s** » Mon Apr 12, 2010 3:43 pm

theTeejmiester wrote:my question is-have you ever driven this car on a regular basis?? cannot ever recall a shot of it not in your garage over the last couple years

well you are correct there my friend. For the last year and a half I have not even started it.. In between the previous paint and the break down ofthe motor, I was driving it for while.

Once I get the motor done, it will hit the road more. Its kinda hard to work on the car when I travel a lot for my company domestically and internationaly. But my next couple of months look like I will be able to focus on the car more to at least get it moving on its own wheels at least.

theTeejmiester · Post by **theTeejmiester** » Mon Apr 12, 2010 3:47 pm

that would be good, shame to see such a nice car up on jacks. and i am getting tired of garage pics

wanna see the color in some bright texas sunlight

NeonOn19s · Post by **NeonOn19s** » Mon Apr 12, 2010 3:54 pm

My wife says the same

I'm with you totally once I can get the motor completed it will be on the road again

NeonOn19s · Post by **NeonOn19s** » Mon Apr 12, 2010 8:25 pm

Here is what I did so far.... I"m still trying to figure out if I want to use the halos or not....

one of my dogs.. Alex checking things out..lol

test mounted

and the two side by side...

My issue right now is this....

the plug is bigger then the plug...

Well I figured how to fix the plug issue.. I just had to de-pin it , drill the hole and seal it.

edit again..

I finished up the halo grommets and now I just need to power them up and make sure they aim correctly before I seal them up.

measy27 · Post by **measy27** » Tue Apr 13, 2010 2:35 am

lookin good..

NeonOn19s · Post by **NeonOn19s** » Tue Apr 13, 2010 10:06 am

Measy-

Thanks.

LilSparkPlug · Post by **LilSparkPlug** » Tue Apr 13, 2010 11:10 am

Nice work so far

NeonOn19s · Post by **NeonOn19s** » Tue Apr 13, 2010 11:15 am

Thanks LSP

I need to next power them up and make sure the cut off lines are right and then go buy the sealer to close them on up.

dtjackten · Post by **dtjackten** » Tue Apr 13, 2010 12:07 pm

projectors looking good, now i wish i had the cash to make some for mine.... lol... cant wait to see it back together nate!

NeonOn19s · Post by **NeonOn19s** » Tue Apr 13, 2010 12:09 pm

Thanks dave, well at least your car is running.

Mee too.

dtjackten · Post by **dtjackten** » Tue Apr 13, 2010 1:32 pm

well sometimes it is running.... lol.... hoping to mess with it alittle more tonight and fine tune some stuff with it.... we will see....

contagious18 · Post by **contagious18** » Tue Apr 13, 2010 3:24 pm

retros look good, i think im going to have to get some for mine

NeonOn19s · Post by **NeonOn19s** » Tue Apr 13, 2010 6:16 pm

thanks man..

I would go with the Retrofit store ones. They are a bit more, but they might be eaiser to get.

Undesolved · Post by **Undesolved** » Wed Apr 14, 2010 12:48 am

NCIS!

NeonOn19s · Post by **NeonOn19s** » Wed Apr 14, 2010 9:02 pm

Yes I love that show... Watching now.. LOL

Undesolved · Post by **Undesolved** » Wed Apr 14, 2010 10:20 pm

I notice the small things in pictures....Like you having NCIS on in the background of your pics and Josh's amp faceplate saying it was a pdx1.1000

NeonOn19s · Post by **NeonOn19s** » Mon Apr 19, 2010 11:33 am

I was able to pick up the rest of my parts needed this past week, but due to a funeral, and bad weather, I was not able to work on the car. This will go for the rest of the week until Saturday evening. I have to study for my GMAT exam on Saturday morning so I can enroll into my Masters Program in the fall.

Stay Tuned....

z3roneo · Post by **z3roneo** » Fri Apr 23, 2010 2:51 pm

Mini Update for my brotha from anotha motha

Drove up to Matts place last nite and I we solved the coldside pipe prob..
(crappy phone pic)

(Silver pipe with white hand will be the coldside and blue pipe is the CAI)

I showed Matt a couple of 2.5 hump couplings that I had from the 2.0 turbo setup and we went to town on your AEM Intake pipe.. Matt chopped it up and we plan to use it for the coldside with your big 90 coupling, another hump hose coupling (if I can find it) and my old HKS Adapter Pipe that's coming off neon motor tonite..

I almost cried when I seen the 2" J bend you guys bought for the coldside.. I was like "NO... get it out of my sigtht"

.. It'll be better with a 2.5 pipe than a 2 incher..

We also (mostly Matt aka tard boy) figured and planned on how the boost/vacuum lines will be ran.. I'm gonna go pick some COPPER/BRONZE tees up tomorrow from Ace Hardware or Home Depot to get everything set

I'll try to drop the stuff off with tard boy sometime this weekend so we can here this biotch run..

And we also need to chop down the CAI and make it into a SRI (Short Ram Intake) cuz it's gonna be reeeeaaaaaaalllllllllyyyyyyy tight..

End of Update...