My never ending question . . .

srt4mike · Post by **srt4mike** » Thu Oct 25, 2007 3:08 pm

I have searched and asked many times on SRTforums and I have still found no answer . . . . Does any one know what brake kits fit with the stock BBS rims on an SRT4 ACR? I have seen one pic of a Willwood Kit on, but that is it. I know there is not a lot of room for bigger calipers, but I am just interested to see if there are any other options. Any info is greatly appreciated!

evilneon02 · Post by **evilneon02** » Thu Oct 25, 2007 7:17 pm

are you just looking for stopping power i dont know if they get bigger but try looking for the four pistin calipers. i dont know much about brakes but i did see a 4 pistin set up but they wanted over $1000 and i have heard some mustang guys talk about them too. hope this help a little

srt4mike · Post by **srt4mike** » Fri Oct 26, 2007 3:16 pm

evilneon02 wrote:are you just looking for stopping power i dont know if they get bigger but try looking for the four pistin calipers. i dont know much about brakes but i did see a 4 pistin set up but they wanted over $1000 and i have heard some mustang guys talk about them too. hope this help a little

Every 4-piston kit is too large for any rims under 17".

MoxHair · Post by **MoxHair** » Fri Oct 26, 2007 3:38 pm

honestly. You really do not need larger brakes or better calipers.. if you are tracking the car a set of Hawk HP Plus Pads and some power Slotted Rotors will be more than sufficiant.

hansken_yo · Post by **hansken_yo** » Fri Oct 26, 2007 6:35 pm

I saw online some where a Brambo kit for the SRT. Didn't mark the site though. It was a four wheel upgrade unlike the Wilwoods.

srt4mike · Post by **srt4mike** » Fri Oct 26, 2007 6:48 pm

MoxHairR/T wrote:honestly. You really do not need larger brakes or better calipers.. if you are tracking the car a set of Hawk HP Plus Pads and some power Slotted Rotors will be more than sufficiant.

I know. It would be my subtle version of "bling" while retaining the stockers. Kind of a waste, but I love the look of aftermarket calipers. Fortunately that is about as rice as I get