Turbo Setup

04_yelneon · Post by **04_yelneon** » Thu Dec 13, 2007 10:03 am

I have a buddy of mine that has a 05 stratus with a 2.4 DOHC. I have an SRT-4 complet turbo setup he wants to buy from me. Iv already checked just to double check, but the exhaust bolt pattern are the same. The 2.7 DOHC are not the same. So my ??? is the turbo setup will work for his stratus? Bolt up an everything?

esteinmaier · Post by **esteinmaier** » Thu Dec 13, 2007 11:04 am

Yes, it will work at low boost provided the fuel system has been provisioned.

Post by **jonnymopar** » Thu Dec 13, 2007 5:44 pm

I'm not sure if the 2001+ Stratus had a motor mount back near the exhaust. If they do, that might get in the way of the turbo charge pipe that hooks underneath the engine. It was a VERY tight fit in my Daytona. As far as just bolting to the head, yes it will. Use the SRT-4 manifold gasket.

dysphagia · Post by **dysphagia** » Thu Dec 13, 2007 7:00 pm

i should work seeing that the 2.4t came in the stratus before the neon

Post by **racer12306** » Thu Dec 13, 2007 7:40 pm

yeah, the 2.4t came in mexican stratus'

BlackRoseRacing · Post by **BlackRoseRacing** » Thu Dec 13, 2007 8:27 pm

do you have a 2dr stratus? the Jap car?
or a 4dr stratus, a chrysler product?
If you got the 2dr, your looking for the wrong parts since its probably got the mitsu motor in it...

Post by **jonnymopar** » Thu Dec 13, 2007 10:44 pm

racer12306 wrote:yeah, the 2.4t came in mexican stratus'

dysphagia wrote:i should work seeing that the 2.4t came in the stratus before the neon

But, was the intercooler piping the same? If not, you've got a trip south to make.