Need recommendation for Quality Camber Botls

TeckNeon · Post by **TeckNeon** » Mon Jun 20, 2005 5:30 pm

Since my accident, I have been having screwed up tire wear (despite the alignment...possibly because they aligned my car with my DC strut tower bars on the car after the repair...but those are long gone).

So, I got new tires and a new alignment, but they said they can't get it where it needs to be unless I pay them $43 a side for set of camber bolts. I don't want some AutoZone specials, I want a great brand.

Any reccomendations?

(BTW, i know I can slot the struts, but I don't think that will work to the full effect...maybe slotting AND the bolts will get me where I want to be.)

dawm · Post by **dawm** » Mon Jun 20, 2005 5:42 pm

me too

i have horrible rear camber on my car, put it this way the othernight i let a friend drive my car while i drove his (so he can see magnum power) and while following i noticed my rear tires are litterly like this

|¯| passenger> \¯\
|_| <<driverside \_\

J-Villa · Post by **J-Villa** » Mon Jun 20, 2005 5:58 pm

i have a set of camber bolts for the rear i have laying around that i never used

TeckNeon · Post by **TeckNeon** » Mon Jun 20, 2005 6:15 pm

E3EsXt02 wrote:i have a set of camber bolts for the rear i have laying around that i never used

Okay...how much? PM or email me...I am interested if they are good bolts. I don't want cheap Chinese crap from Advanced Auto like they were going to put on my car. I don't even know who makes good camber bolt kits!

J-Villa · Post by **J-Villa** » Mon Jun 20, 2005 6:46 pm

i forget who made mine...i got them A and A and paid a good penny for them....let me go out in the garage and see if i can find them...

also these were originally bought for a 1st gen but i never put them on my 98...and i talked to A and A and they say they'll fit on 2nd gen neons also....Does any one else think this is true?

dancingfroggy · Post by **dancingfroggy** » Mon Jun 20, 2005 6:57 pm

Modern Performance also has camber bolts. On their site its known as

"Gold Line Camber Correction Kits"

front
P/N: 81260 $20.99 EZ Cam

Rear
P/N: 81250 $20.99 EZ Cam

fusion210 · Post by **fusion210** » Mon Jun 20, 2005 7:30 pm

Dodge also sells 'crash' bolts. That's what a lot of first gen guys use.

J-Villa · Post by **J-Villa** » Mon Jun 20, 2005 11:11 pm

i'm pretty sure mine were the gold line one...b/c i got my springs and camber kit at the same time from the same place

scneonchic · Post by **scneonchic** » Tue Jun 21, 2005 10:39 pm

i have SPC, they were like $20 for the front and $20 for the back, and they have held up just fine

TwistedTunerz · Post by **TwistedTunerz** » Sun Jul 10, 2005 8:27 pm

I would buy the mopar performance "crash bolts" they are actualy the autocross bolts that are stronger then stock just allow more play when giving an alignment. if you get 1 bolt on each strut it will give you -1 degree and 2 you can get around -2....-1.75 is recomended for autocross and each bolt runs about 12 bucks