CAMS_02's 2002 SE...

Do you have a project going or will you be starting a project here very soon and just want to keep a log of everything you and when? Share with everyone every step of the way what sort of progress you are making on your project.
Post Reply
CAMS_02
2GN Member
Posts: 48
Joined: Mon Jan 14, 2008 6:22 pm
Location: Appleton, Swissconsin
Contact:

CAMS_02's 2002 SE...

Post by CAMS_02 » Mon Feb 04, 2008 6:18 pm

January 15, 2008: Installed four new NGK V-Power spark plugs (BKR6E) with a .035 gap. Slight lugging condition remedied.

February 2, 2008: Oil and filter change with initial Auto-Rx treatment. Next oil change due @ 66108 miles. Also removed resonator box from intake tract.

February 5, 2008: Installed K&N air filter (E-1006).
Last edited by CAMS_02 on Thu Feb 07, 2008 8:09 pm, edited 1 time in total.
Image
--------------------
Twenty-One Website

CAMS_02
2GN Member
Posts: 48
Joined: Mon Jan 14, 2008 6:22 pm
Location: Appleton, Swissconsin
Contact:

Post by CAMS_02 » Thu Feb 07, 2008 8:09 pm

Installed MSD coil (PN8239) and Accel Thundersport wires (7964R) @ 63820 miles.

Image

2001 ACR
2GN Member
Posts: 175
Joined: Wed Jan 30, 2008 10:00 am
Location: San Antonio, TX

Post by 2001 ACR » Thu Feb 07, 2008 8:12 pm

Post edited at request of topic starter.

CAMS_02
2GN Member
Posts: 48
Joined: Mon Jan 14, 2008 6:22 pm
Location: Appleton, Swissconsin
Contact:

Installed on February 19, 2008...

Post by CAMS_02 » Sun Feb 24, 2008 6:48 pm

Image

Gauge bezel: 18 bucks, including shipping. HVAC bezel: $25, including shipping. Two cans of Fusion paint and one can of clear enamel: $9. Total cost of this mod: $52.

The dog is my back seat mascot, "Dodger." He didn't originally come with the Dodge key fob dog tag...

CAMS_02
2GN Member
Posts: 48
Joined: Mon Jan 14, 2008 6:22 pm
Location: Appleton, Swissconsin
Contact:

Post by CAMS_02 » Thu Jun 05, 2008 8:25 pm

Changed manual transmission fluid and added 3 oz. of Auto-Rx treatment. Next fluid change is due @ 67,217 miles.

Homemade catch can added on June 2, 2008. So far, so good...

CAMS_02
2GN Member
Posts: 48
Joined: Mon Jan 14, 2008 6:22 pm
Location: Appleton, Swissconsin
Contact:

70,112 Miles...

Post by CAMS_02 » Sun Jan 04, 2009 6:15 pm

Changed oil and filter, using Mobil 1 Synthetic 0w30 and Purolator PureONE filter. Next oil change due at 77,112 miles.

Modified catch can to include a copper pot scrubber and a length of rubber hose on the intake side of the cap.

Added one AC Delco stop leak tablet and necessary amount of long-life coolant.

Rotated wheels and tires (FWD method) as outlined in the owner's manual.
Image
--------------------
Twenty-One Website

CAMS_02
2GN Member
Posts: 48
Joined: Mon Jan 14, 2008 6:22 pm
Location: Appleton, Swissconsin
Contact:

March 21, 2009 (72,287 miles)...

Post by CAMS_02 » Sat Mar 21, 2009 5:19 pm

Replaced spark plugs with Autolite 3923, gapped to .035.

Topped off oil ( Mobil 1 0w30), brake fluid (DOT 3).

Cleaned battery posts and applied dielectric grease.

Cleaned and re-oiled K&N air filter.

NeonOn19s
2GN Member
Posts: 2074
Joined: Mon Nov 07, 2005 11:44 am
Location: Spring,TX

Post by NeonOn19s » Sat Mar 21, 2009 5:58 pm

cool keep us posted
| Nathan |
Image


Official "I'm Going to Drive My Neon til it Dies" Club Member # 72
Semper Fi!!! USMC

Post Reply

Return to “Progress/Project Log”