SRT Spoiler fitment 00

w0158981 · Post by **w0158981** » Fri Feb 15, 2008 3:40 pm

so i got my srt spoiler today:D love it i must say but i do have the problem now of putting it on, so i'm wondering is there holes already in the 00 trunk lids like markers? or am i saying stupid things again lol, if theres not i'm going to need some help guys

Danteneon · Post by **Danteneon** » Fri Feb 15, 2008 4:11 pm

Think of it this way...you are asking questions first, not attempting to install it and then asking "What is the best way to fill holes in my deck lid?"

Well, I haven't put mine on yet, but I know the '02 have cutouts on the underside of the deck lid where the nuts would go on. Not sure about the '00 deck lid though. If I were you, I would get some good pics of where the spoiler sits on the deck lid (measurements would be even better) and make a template for the bolt pattern of the spoiler, as well as the base of the spoiler where it touches the deck lid. Remember the adage...measure twice, cut once!

w0158981 · Post by **w0158981** » Fri Feb 15, 2008 4:42 pm

o god i'm so gonna f this up lol i was hoping it was like the 02 with the holes already marked hmm i hope someone knows lol

Danteneon · Post by **Danteneon** » Fri Feb 15, 2008 5:09 pm

Snap a pic of the underside of your deck lid, may be able to tell if they are there. Mind you, they are just a general idea where you spoiler is going to go....

yellowpatrol · Post by **yellowpatrol** » Fri Feb 15, 2008 8:05 pm

There's a tutorial for this I think. Ah yes, her she is. Written by our very own kc2002acr.

http://forum.2gn.org/viewtopic.php?t=10640

Don't forget to adjust your trunk spring for the extra weight of the heavy SRT spoiler.

w0158981 · Post by **w0158981** » Fri Feb 15, 2008 8:07 pm

hmmm ok lil better but i still don't know if 00's got those black circls for spoiler holes

contagious18 · Post by **contagious18** » Sun Feb 17, 2008 9:19 pm

they dont, i did on mine but i had instructions from mopar. good luck cutting the holes, if u want ill take a pic of how mine looks like

nate-00neon · Post by **nate-00neon** » Sun Feb 17, 2008 9:37 pm

i did the same thing...NO holes. and i didnt know that i could adjust the springs on there for the added weight...hmm lol

w0158981 · Post by **w0158981** » Sun Feb 17, 2008 9:39 pm

contagious18 wrote:they dont, i did on mine but i had instructions from mopar. good luck cutting the holes, if u want ill take a pic of how mine looks like

hey yea i'd love it if you can snap me a pic, do you know any measurements as to where i should drill? i read the how to but i dunno where to mark

nate-00neon · Post by **nate-00neon** » Sun Feb 17, 2008 9:45 pm

mine had a thing that helped me know where to put the holes....did you open your box yet?

contagious18 · Post by **contagious18** » Sun Feb 17, 2008 9:46 pm

ill take a pix tomorrow morning since i cant c outside

w0158981 · Post by **w0158981** » Sun Feb 17, 2008 9:56 pm

i opened it up but i dunno wat i'm looking for so i'm useless lol i'm kinda nervous to do it myself but i don't want it tocost a ton to put on

contagious18 · Post by **contagious18** » Sun Feb 17, 2008 9:57 pm

i just painted mine and put it on myself.

nate-00neon · Post by **nate-00neon** » Sun Feb 17, 2008 9:59 pm

its not that hard...you just need to look at the directions and do it...how did you do ur CAI?

ur goin to have to do something cuz we cant put it on over the internet

contagious18 · Post by **contagious18** » Sun Feb 17, 2008 10:01 pm

ur going to do a lot of drilling because our trunks are different then the 02's. from the inner shell

w0158981 · Post by **w0158981** » Sun Feb 17, 2008 10:09 pm

lol the cai was not to bad a buddy of mine helped with that but as far drilling holes in metal you give me some pictures dimensions you know where i'm drilling these things i'll be good juss gotta figure out where i'm drillin

contagious18 · Post by **contagious18** » Sun Feb 17, 2008 10:11 pm

k well ill post a pic tomorrow

w0158981 · Post by **w0158981** » Sun Feb 17, 2008 10:26 pm

k thanks alot for the help guys greatly appreciated

nate-00neon · Post by **nate-00neon** » Sun Feb 17, 2008 10:38 pm

are there any directions that came with it or any paper templates?
i would think they should have both in there to help you out.........just got to look at all the paper in there and let us know what you got

w0158981 · Post by **w0158981** » Mon Feb 18, 2008 7:34 am

i got nothin lol, i got the invoice and the spoiler lol

Danteneon · Post by **Danteneon** » Mon Feb 18, 2008 7:59 am

w0158981 wrote:i got nothin lol, i got the invoice and the spoiler lol

Let me see if there is any templates in my kit at work...I'll let you know in a few.

w0158981 · Post by **w0158981** » Mon Feb 18, 2008 8:57 am

*waits anxiously*

Danteneon · Post by **Danteneon** » Mon Feb 18, 2008 9:24 am

You have a PM sir

w0158981 · Post by **w0158981** » Mon Feb 18, 2008 11:00 am

GOT ME A TEMPLATE THANK YOU DANTENEON!

Danteneon · Post by **Danteneon** » Mon Feb 18, 2008 11:07 am

That's what I'm here for....well, that and to hang out with good peeps and their cars, but you get the idea

yellowpatrol · Post by **yellowpatrol** » Mon Feb 18, 2008 12:37 pm

Share the template so this question doesn't come up again

w0158981 · Post by **w0158981** » Mon Feb 18, 2008 1:37 pm

its in pdf format so it can't be posted atleast anyway i know off but i can email it lol

Post by **Diablo0** » Mon Feb 18, 2008 1:41 pm

Shoot it to me in an e-mail and I can host it.

Diablo0 at 2gn dot org

Danteneon · Post by **Danteneon** » Mon Feb 18, 2008 1:41 pm

I can scan it and post it when I get home for all to share

w0158981 · Post by **w0158981** » Mon Feb 18, 2008 2:52 pm

Diablo0 wrote:Shoot it to me in an e-mail and I can host it.

Diablo0 at 2GN dot org

you have an email