LIGHTS OUT?!? HELP!!! Spoke too soon...
LIGHTS OUT?!? HELP!!! Spoke too soon...
Ok. so I get in my car to go to work and I turn on my head lights... they dont work and neither do my fogs... I toggled them on and off a few times untill they shot on. ok, that's good. I get to the "meet site" (we carpool) and i turn them off untill we decide who's car we're taking, it happens to be mine. I turn them back on and nothing. I end up having to hold the high beams in all the way up and back because they still didnt turn on after we got done.
now to sum it all up. 3 clicks on the toggle/click for the lights
1st toggle, parking lights and tail lights = they come on
2nd toggle, headlights = dont come on
3rd toggle, pull out for fogs = dont come on
I checked the fuses and seems like they're ok... so... now i notice when I turn the swtich the cluster lights flicker slightly like the headlights came on. am I missing something?...
now to sum it all up. 3 clicks on the toggle/click for the lights
1st toggle, parking lights and tail lights = they come on
2nd toggle, headlights = dont come on
3rd toggle, pull out for fogs = dont come on
I checked the fuses and seems like they're ok... so... now i notice when I turn the swtich the cluster lights flicker slightly like the headlights came on. am I missing something?...
Last edited by Kelevra on Tue Feb 19, 2008 7:56 pm, edited 2 times in total.
Sounds like you have fallen victim to yet another MFS/harness problem...
http://forum.2gn.org/viewtopic.php?t=28616
Good info there. I would check into that area first.
http://forum.2gn.org/viewtopic.php?t=28616
Good info there. I would check into that area first.
If I could just figure out how to meld the Outback and the Neon into one car...


- BlackRoseRacing
- 2009 Platinum Contributor
- Posts: 12729
- Joined: Sat Dec 25, 2004 8:58 am
Order the pigtail for the 2000 model, it will come color co-ordinated to make install easier...
http://forum.2gn.org/viewtopic.php?t=21065
http://forum.2gn.org/viewtopic.php?t=3104
^^^
3years ago I rewired my R/T like in the link above and with stock wattage bulbs I have yeat to have any problems
http://forum.2gn.org/viewtopic.php?t=21065
http://forum.2gn.org/viewtopic.php?t=3104
^^^
3years ago I rewired my R/T like in the link above and with stock wattage bulbs I have yeat to have any problems
FIXED IT!! I held the high beams on and turned the lights on and it works now!!!
Now time to explain how
I went to the stealership and they wanted 85 bucks just to diagnose it!? WTF!?! **** that... I went home and opened up my steering column ans checked the harness and on the switch side looked great... so I thought it might have been the MFS needed to be replaced. but then I remembered that someone said about the high beams being on and they switched them off and screwed it up. so I held in the high beams and switched them on... and POW! Holy SH*T! it came on!
Now time to explain how
I went to the stealership and they wanted 85 bucks just to diagnose it!? WTF!?! **** that... I went home and opened up my steering column ans checked the harness and on the switch side looked great... so I thought it might have been the MFS needed to be replaced. but then I remembered that someone said about the high beams being on and they switched them off and screwed it up. so I held in the high beams and switched them on... and POW! Holy SH*T! it came on!
- 2k1MotorSport
- 2011 Gold Contributor
- Posts: 2558
- Joined: Mon Aug 14, 2006 6:15 pm
- Location: Lansdale, PA
The wiring connection wasn't melted at all? I'm really suprised...but that is awesome.
After I had the MFS problem I ended up looking at the inside of my switch and it was burnt to hell and the plastic was actually melted to the point you could bend it.
I would keep an eye on it if I were you.
After I had the MFS problem I ended up looking at the inside of my switch and it was burnt to hell and the plastic was actually melted to the point you could bend it.
I would keep an eye on it if I were you.

-Chad
2009 Dodge Viper VOI #66
2010 Dodge Ram Power Wagon - Sold
2010 Dodge Challenger SRT-8 - Sold
2009 Dodge Challenger SRT-8 -Sold
2004 Dodge Neon SRT-4 - Sold
1998 Dodge Neon R/T
Carlos Mencia FTMFW!03neonSE Posted: Tue Feb 19, 2008 3:49 pm Post subject:
--------------------------------------------------------------------------------
thats what i was trying to tell you last night. dee dee, dee
Later
Allex
Official "I drove my Neon till it died" member #??? Parted out the '01 so that she can live on through others! (Now driving + modding my '09 Chevy HHR SS!)


Mat00ES wrote:Find me a buyer and I'll sell some body parts for car parts.
AWESOME. THANK You for posting these links !!BlackRoseRacing wrote:Order the pigtail for the 2000 model, it will come color co-ordinated to make install easier...
http://forum.2GN.org/viewtopic.php?t=21065
http://forum.2GN.org/viewtopic.php?t=3104
^^^
3years ago I rewired my R/T like in the link above and with stock wattage bulbs I have yeat to have any problems
-Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-
evilneon02
- 2GN Member
- Posts: 753
- Joined: Fri Jul 27, 2007 7:31 pm
- Location: NC
- Contact:

