BBS RXII Wheels Fitment Questions...

Anything that has to do with wheels and tires goes here. Will a wheel fit? Ask it here. Will a tire fit your wheel? Ask it here.
Post Reply
User avatar
GTS
2GN Member
Posts: 753
Joined: Wed May 12, 2004 9:58 am
Location: Chitown - Motown
Contact:

BBS RXII Wheels Fitment Questions...

Post by GTS » Wed Feb 27, 2008 11:44 am

Found a good deal on a set of BBS wheels and I was wondering if anyone can tell me if these are gonna fit, Offset being the major issue...

BBS RXII
Wheel diameter (in.) 16 Wheel width (in.) 6.5
Wheel lug pattern (mm) 5x100 Wheel centerbore (mm) 57.1
Wheel offset (mm) 43 notes:
Not forged
Stock tire size 205/55-16
2 piece design...


Any ideas if these will fit, I had 16x7 rims with 38mm offset I think and the same tire size and they barely fit, I had less then a quarter inch space between the tire and the struts...
Image

OB
Former Moderator
Posts: 9686
Joined: Tue Nov 15, 2005 9:38 pm
Location: Bay Area, CA

Post by OB » Wed Feb 27, 2008 11:54 am

The wheels should fit, but that tire size is incorrect. The aspect ratio should be somewhere closer to 45 or 50 at the most. The overall tire is too tall, which is probably going to cause it to rub the strut perch. A wheel spacer (3-5mm should be plenty) can buy you some extra room in the event the offset is too much, but I dont see it being an issue.
-Derek

|Donate to 2gn|Feedback || OB's | GozziFab | All Business |


User avatar
GTS
2GN Member
Posts: 753
Joined: Wed May 12, 2004 9:58 am
Location: Chitown - Motown
Contact:

Post by GTS » Wed Feb 27, 2008 12:04 pm

Cool, I was worried because my old tires were the 205 55 16 and they worked just fine but that was with a 7"wide rim and a 38mm offset, and tehse are 5mm less but also 0.5in narrower so as you said I assumed they will work but I guess I will need to double check..

Now is 250$ too mcuh for the set, BTW the tires are worn out and will need replacement soon...
Image

OB
Former Moderator
Posts: 9686
Joined: Tue Nov 15, 2005 9:38 pm
Location: Bay Area, CA

Post by OB » Wed Feb 27, 2008 12:07 pm

$250 for a set of BBS wheels? That's a steal, if theyre in decent shape. Just remember, the tires will be just as tall as they are now, but slightly closer to the suspension components, so if you dont have room as it is, a wheel spacer or a properly sized tire is a must.
-Derek

|Donate to 2gn|Feedback || OB's | GozziFab | All Business |


User avatar
GTS
2GN Member
Posts: 753
Joined: Wed May 12, 2004 9:58 am
Location: Chitown - Motown
Contact:

Post by GTS » Wed Feb 27, 2008 12:16 pm

This is what they look like...
Arent they the same as the ACR SRT ones... ? they look darn close...
Image
Image
Image
Image
Image

yellowpatrol
2GN Member
Posts: 2847
Joined: Mon Jan 01, 2007 8:12 pm
Location: Kansas City

Post by yellowpatrol » Wed Feb 27, 2008 1:27 pm

They do look close minus the VW symbol.
FEEDBACK
Image
Adionik wrote:On a 100% stock SRT engine i've seen detonation on 93 octane, I know what i'm talking about.

User avatar
GTS
2GN Member
Posts: 753
Joined: Wed May 12, 2004 9:58 am
Location: Chitown - Motown
Contact:

Post by GTS » Wed Feb 27, 2008 1:29 pm

Geezzzee I didnt even notice that, I gues the guy had them on his VW, or got them from someone who had them on VW... As long as they fit, I can get them some dodge emblems to match...
Image

yellowpatrol
2GN Member
Posts: 2847
Joined: Mon Jan 01, 2007 8:12 pm
Location: Kansas City

Post by yellowpatrol » Wed Feb 27, 2008 1:31 pm

Or the old school Chrysler decal would be tight!

Image
FEEDBACK
Image
Adionik wrote:On a 100% stock SRT engine i've seen detonation on 93 octane, I know what i'm talking about.

SlvrACR
2GN Member
Posts: 4220
Joined: Thu Jun 16, 2005 5:13 pm
Location: Roseville MI

Post by SlvrACR » Wed Feb 27, 2008 3:06 pm

Those are stock VW wheels. BBS makes them for VW. You can buy new caps from Ebay that say BBS or just get the BBS decal
2gn Member Feedback
My Project Log
01 Dodge ACR - SOLD
01 Dodge RT - 279whp 329wtq

Image

Post Reply

Return to “Wheels / Tires”