safc2 tuner needed

Wenuden · Post by **Wenuden** » Wed Mar 05, 2008 7:23 pm

I'm in need of a person or a shop in the nova/md/dc area that has experience tuning an srt-4 with an safc2. Can anyone help?[/img]

jrumann59 · Post by **jrumann59** » Wed Mar 05, 2008 10:38 pm

do you have dyno sheets? if not it isn't safe. The best way is to spend the money at the doyno and tune the SAFC before every run to get it dialed in correctly or get a wideband installed.

Wenuden · Post by **Wenuden** » Wed Mar 05, 2008 10:42 pm

I just installed a wideband. That's why I want to tune LOL. I'm running retarded rich at wot, and could use some work at part throttle. I don't trust myself to do it, I want an experienced person to do it.

jrumann59 · Post by **jrumann59** » Wed Mar 05, 2008 11:21 pm

honestly you should just take reduce fuel at 5% on high throttle setting at or around the RPM you really start richening up. Then take a drive all the way thru your powerband and hopefully your WB has some logging features so you can see what changed AF wise when you made the incremental change.

Wenuden · Post by **Wenuden** » Wed Mar 05, 2008 11:38 pm

no datalogger yet, that will come with the aeroforce scan gauge next month. I honestly have no idea how to operate/set the safc, other than fliping it up or down to see traffic lights, I havnt touched it since I bought the car. Its on the display screen so I can moniter throttle position.

jrumann59 · Post by **jrumann59** » Fri Mar 07, 2008 1:14 am

If I come out Sat. night I will run thru a few things with you.