who has swap the SRT dash harness

Doing a SRT-4 Motor swap into your Neon, maybe even a 2.4... have questions about it, what you'll need or what issues you'll run into? Answers can be found in here.
Post Reply
datadave49
2GN Member
Posts: 732
Joined: Sun Jul 23, 2006 8:48 pm
Location: Western New Jersey
Contact:

who has swap the SRT dash harness

Post by datadave49 » Thu Apr 10, 2008 8:05 pm

Hey Hey
Just as it is in the subject said but what did it do. Does your blower motor work and what other thing have you found that does not work . Oh I think this only for the 2000 body and I think the year of the srt does not matter
Dave

Adam K.
2GN Member
Posts: 244
Joined: Wed Jul 19, 2006 11:40 am
Location: North East, MD

Post by Adam K. » Fri Apr 11, 2008 10:01 am

I swapped mine out but my car was a 2001 R/T to a 2004 SRT-4. I lost my outside heated mirrors, the glove box and bottom center console light. The blower works fine but the plug is different. I had to swap the plugs as the SRT-4 seems not to have a temperature probe anymore. I replaced every harness except the door harnesses.

datadave49
2GN Member
Posts: 732
Joined: Sun Jul 23, 2006 8:48 pm
Location: Western New Jersey
Contact:

Post by datadave49 » Fri Apr 11, 2008 10:16 pm

Hey Hey
Adam did the plug from the r/t have two wires and the SRT have I think like 6
Dave

Adam K.
2GN Member
Posts: 244
Joined: Wed Jul 19, 2006 11:40 am
Location: North East, MD

Post by Adam K. » Sat Apr 12, 2008 1:44 am

datadave49 wrote:Hey Hey
Adam did the plug from the r/t have two wires and the SRT have I think like 6
Dave
My Stock Harness had 5 wires. Two going to the blower motor and 3 going to the probe. The SRT-4 harness only has the two for the blower motor. I assume they did away with the probe sometime in 2004 because the service manual shows it but the harness simply doesn’t have any where to connect it to. I don't have AC in the car anyways so I don't care. But the motor/blower works just fine.

billm0066
2GN Member
Posts: 159
Joined: Wed Feb 27, 2008 10:32 am

Post by billm0066 » Sat Apr 12, 2008 10:36 am

I have an 01 r/t and I didnt swap the dash harness. I just spliced in for the boost gauge and ran the vac line up there.

c2k
2GN Member
Posts: 237
Joined: Sun Jul 11, 2004 1:35 pm

Post by c2k » Sat Apr 12, 2008 4:56 pm

swapped only the body harness. the dash is still 100% 01 R/T

everything works even the heated mirrors works. The only thing that does not work is the traction control switch. I wish I could get that to work!! cuz w/ the amt of power I am putting down, it does help and make a difference to get traction w/ the 01 RT custer traction control.
c2k aka Canuck_2k

datadave49
2GN Member
Posts: 732
Joined: Sun Jul 23, 2006 8:48 pm
Location: Western New Jersey
Contact:

Post by datadave49 » Sat Apr 12, 2008 9:43 pm

Adam K. wrote:
datadave49 wrote:Hey Hey
Adam did the plug from the r/t have two wires and the SRT have I think like 6
Dave
My Stock Harness had 5 wires. Two going to the blower motor and 3 going to the probe. The SRT-4 harness only has the two for the blower motor. I assume they did away with the probe sometime in 2004 because the service manual shows it but the harness simply doesn’t have any where to connect it to. I don't have AC in the car anyways so I don't care. But the motor/blower works just fine.
Hey Hey
Thanks Adam I had the wire backwards
Dave

Adam K.
2GN Member
Posts: 244
Joined: Wed Jul 19, 2006 11:40 am
Location: North East, MD

Post by Adam K. » Sat Apr 12, 2008 10:13 pm

c2k wrote:swapped only the body harness. the dash is still 100% 01 R/T
You never had problems with your dome light not working? That was one of the reasons I swapped mine. I was able to splice a wire to make them work but it always bothered me so one day I just said screw it I'll swap it. Kind of miss the lights and the heated mirrors though.

datadave49
2GN Member
Posts: 732
Joined: Sun Jul 23, 2006 8:48 pm
Location: Western New Jersey
Contact:

Post by datadave49 » Sun Apr 13, 2008 9:45 pm

HEY HEY
Yea we are going to fight the dome light after we get the bugs out so it runs Then we can work out all that don't work
Dave

SuperRT
2GN Member
Posts: 64
Joined: Tue Feb 13, 2007 12:49 pm

Post by SuperRT » Mon Apr 14, 2008 2:03 pm

Odd. I did the dash harness swap into my 01 R/T, only lost the dome light, trac control, and the glove compartment light.

Everything else works as should.
Image
General: Full SRT-4 swap
18psi spike ~ 15psi redline.

TwistedTunerz
2GN Member
Posts: 250
Joined: Fri Oct 01, 2004 12:26 am
Location: St.Cloud,MN

Post by TwistedTunerz » Mon May 12, 2008 8:17 am

i did the harness swap on my 00 going to a 04 srt only things i lost were glove box light, cd changer light everything else works good
TwistedTunerz

2002TuRboNeoN
2GN Member
Posts: 163
Joined: Mon Jan 29, 2007 6:07 pm
Location: Buffalo, New York

Post by 2002TuRboNeoN » Sun May 18, 2008 12:27 am

i did the dash swap my heatercore had a different plug..from the 02...not sure if its different for all of them but i ran into a few problems..mine still doesnt turn over...im hoping maybe the 02 sensor of any of that may have somethign to do with it
SRT-4 Swap into the 02, CAI, unorthodox UDP, turbo xs RFL BOV, Boomba solid MM, 3" downpipe

Image

2002TuRboNeoN
2GN Member
Posts: 163
Joined: Mon Jan 29, 2007 6:07 pm
Location: Buffalo, New York

srdg

Post by 2002TuRboNeoN » Sun May 18, 2008 12:27 am

i did the dash swap my heatercore had a different plug..from the 02...not sure if its different for all of them but i ran into a few problems..mine still doesnt turn over...im hoping maybe the 02 sensor of any of that may have somethign to do with it
SRT-4 Swap into the 02, CAI, unorthodox UDP, turbo xs RFL BOV, Boomba solid MM, 3" downpipe

Image

User avatar
snkmug
2GN Member
Posts: 513
Joined: Sat Jan 27, 2007 3:54 am
Location: Hatteras,NC

Post by snkmug » Sat May 24, 2008 11:32 pm

I swapped the whole heater box assembly into my 2000 swap, it was easier that cutting and splicing dash wires, but I had a complete donor car to pull from.......
Image

Post Reply

Return to “Motor Swap”