Okay here goes....
My wife wants to retain her stock headunit so she can keep her 6 disc changer. So I've hooked up the amplifier and subs - power wire to the battery, grounded to the chassis, speaker wire to the subs.
I got two things left. One is where the hell do I tap off for the amp remote power? I've tried several wires off the headunit wiring, nothing. Where can I get the remote power from?
Also Sammage told me that I need a (can't remember the name of it) that takes the speaker wires into a box so I can wire up RCA's from the box. Well I have that hooked up, but I'm not sure if I've tapped into the right wires...
So far I have the wires tapped off for the rear speakers this way:
right rear + brown
right rear - peach color (I was told yellow but I see no yellow wire)
left rear + dark blue
right rear - light blue
Is this right?
This is for a 99 GMC Envoy btw
Amp/sub help!!!
- 03sxt
- Former Jr. Admin
- Posts: 11389
- Joined: Wed May 11, 2005 10:53 am
- Location: Conneaut, Ohio
- Contact:
Re: Amp/sub help!!!
I might have been able to help you with the factory wiring, but...
For the amp remote, find an 'IGN' spot in the fuse box or some other accessory that gets power with the ignition and run a wire from that spot to the remote location on the amp. This will turn the amp on with the ignition.
QwikSRT4 wrote:This is for a 99 GMC Envoy btw
For the amp remote, find an 'IGN' spot in the fuse box or some other accessory that gets power with the ignition and run a wire from that spot to the remote location on the amp. This will turn the amp on with the ignition.
-
Datoyminaytah
- n00b
- Posts: 16
- Joined: Fri Dec 31, 2004 7:56 pm

