Foglight bulb change question

hound9164 · Post by **hound9164** » Fri May 09, 2008 7:36 pm

I blew a fog bulb, and i am wondering if i can just unscrew the housing and pull them foward to change the bulb, or if my only option is to break my hand in order to change them from underneath?

Post by **Canada** » Fri May 09, 2008 8:06 pm

To get it out the front, you need to undo th ebulb anyway.

Might as well just take a little pain and suck it up

If its on your driver side, take a moment to remove that huge resonator in there anyway and make your life easier.

hound9164 · Post by **hound9164** » Fri May 09, 2008 11:59 pm

I never had a problem taking the biuld out, nut more or less putting the new one in right.

what is this resonator u speak of? purpose? picture?

Thank you for your input.

gotta get my neon ready for another roadtrip, 2nd one in 2 years!!!

hound9164 · Post by **hound9164** » Sun May 11, 2008 11:43 pm

anybody?

Wenuden · Post by **Wenuden** » Mon May 12, 2008 1:48 am

the resonator is a big plastic box that helps silence air coming into the intake. Its kinda heavy and is a restriction.

hound9164 · Post by **hound9164** » Tue May 20, 2008 12:49 pm

IC. I took that out when i put in my CAI a few years ago.

Swordfish2Cowboy · Post by **Swordfish2Cowboy** » Tue May 20, 2008 12:58 pm

If it's the passenger side, you're gonna have to take the headlight off. Possibly the horn, too, if you want it nice and easy. Driver's side take off the airbox, maybe. Or the headlight. Or both. The only time I put a new one in there was when I had the whole front fender off.

SYRYS04 · Post by **SYRYS04** » Sun Jun 01, 2008 7:14 pm

If you still need help removing your fog light bulbs, let me know in a PM or respond here. I did both of mine in 20 MINUTES!! lol... with my factory intake/resonator/ both headlights all in place.. i have big hands too, I can easily palm a nba sized basketball and I didn't have any trouble.

(based off memory)

I have a 04 neon sxt but it's same as your 03.

it's about 3-5 bolts, mine came with 3 but theres holes for 5. The black plastic piece thats directly underneath the bumper remove that.

Unattach the foglight wire clip from that so you don't ruin that.

Twist out each foglight from the back and there u go. each light snaps out so its easy.

Unless your very skinny. I would suggest lift up the front end of the car by a foot or 2. that way you got movin around room.

Any other Q's let me know... have fun.