Damn Trunk

jetas · Post by **jetas** » Sun Jun 22, 2008 10:37 pm

Ok so i bought a new amp and as i was tuning it I heard how horrible the damn trunk rattles. So I used the handy search function and I saw a couple of people mention Peel & Seal from home improvement stores. I looked it up and its really cheap. But has anyone used it and does it work well for the rattling? Or are there any other kinds of sound deadeners that are as affordable and get the job done. Someone please chime in i want to get this taken care of ASAP. Thanks in advance guys

contagious18 · Post by **contagious18** » Mon Jun 23, 2008 2:00 am

i have it on my trunk, under my backseats. works good bro

jetas · Post by **jetas** » Mon Jun 23, 2008 11:32 am

http://www.lowes.com/lowes/lkn?action=p ... lpage=none
Is this the stuff?

jetas · Post by **jetas** » Mon Jun 23, 2008 8:50 pm

Can anyone chime in

Mr Josh Zombie · Post by **Mr Josh Zombie** » Mon Jun 23, 2008 8:53 pm

sorry never used the stuff. always wanted to but i was too lazy

jetas · Post by **jetas** » Mon Jun 23, 2008 8:57 pm

lol. I dont wana do it either but i dont wana sound like a retard with my rattling like its guna come off

Post by **occasional demons** » Mon Jun 23, 2008 10:59 pm

From the description it seems close to b-quiet or dynomat, but the Lowes around me don't carry it, so I can't exactly go look at it. I would think it would work fine tho. don't know what the cost is, but I'm sure it's cheaper than Dynomat, otherwise you wouldn't be sticking that stuff on your roof!
I'm kinda bummed now I can't seem to find it locally. Ghetto sound deadner FTW!

jetas · Post by **jetas** » Mon Jun 23, 2008 11:12 pm

Well the in the link i posted it said $15 for a 6"x25' roll. And the Lowes close to me has it. Im pretty sure ima get it. Now i just need to slang some other shit and get the funds modding on a budget

Post by **occasional demons** » Mon Jun 23, 2008 11:17 pm

Yeah, the link works, but unless it is in store, they won't give a price. $15 is dirt cheap compared to the real stuff. And I'd bet the difference wouldn't be enough to matter to most of us!

Jeremy M · Post by **Jeremy M** » Tue Jun 24, 2008 12:32 am

well, if u live in place that gets really hot in the summers, there have been some people that have had it come off in the heat....be sure to apply it when it's hot or with a hair dryer and roll it on really good.

jetas · Post by **jetas** » Tue Jun 24, 2008 1:03 am

Well it asked for the zip code to check for availability and thats the price it showed. And i mean if it works for what i need then i dont see a problem. besides i like tryin out new shit. And for the heat...I live in cali. But trust me im going to apply it as careful as possible. I hate redoing shit.

Undesolved · Post by **Undesolved** » Tue Jun 24, 2008 1:33 am

if this works let me know cause my lowes has some in stock too and i wouldn't mind investing the $15 if its worth it.

contagious18 · Post by **contagious18** » Tue Jun 24, 2008 3:21 am

yea dats it, i never had issues wit da heat. its worth it. one roll did my trunk and some under my rear seats

jetas · Post by **jetas** » Tue Jun 24, 2008 4:12 pm

Alright then il definately be trying the stuff. Thanks for the replies guys

benzsxt · Post by **benzsxt** » Tue Jun 24, 2008 10:10 pm

You can also spray undercoating on the inside of your trunk. Its cheaper and easier and wont come off in the heat. You also save time by not cutting all the pieces. You can also seam seal the webbing on the trunk lid to get rid of the rattle.

jetas · Post by **jetas** » Tue Jun 24, 2008 10:53 pm

Holy shit i tottaly forgot about goin that route. What would i use for the webbing though? and also i looked aroud to look for the undercoating but havent turned up any useful results.

benzsxt · Post by **benzsxt** » Wed Jun 25, 2008 8:44 pm

Automotive seam sealer and try an auto parts store. I like 3M products the best, pricey but real good

TheRandom1 · Post by **TheRandom1** » Wed Jun 25, 2008 8:50 pm

Any autozone or pepboys or anything like that would have the rubberized undercoating, that is what I'm going to be using on my trunk when I get that far.

jetas · Post by **jetas** » Wed Jun 25, 2008 9:05 pm

Its in a spray can right? if so then i know what you guys are talkin about. My dad used it on his old Chevelle. Shit worked great

TheRandom1 · Post by **TheRandom1** » Wed Jun 25, 2008 9:08 pm

yup, just like spray paint

jetas · Post by **jetas** » Wed Jun 25, 2008 9:16 pm

OK gotcha. Damn now i gotta see which one im going to use

Undesolved · Post by **Undesolved** » Wed Jun 25, 2008 9:42 pm

Anyone wanna post pics for reference of what ya'll are talkin about since i haven't the slightest...

TheRandom1 · Post by **TheRandom1** » Wed Jun 25, 2008 9:49 pm

Plus, I wanna see the before/after pics of your trunk!

I think this is what we're all referring to.

http://www.autozone.com/selectedZip,604 ... ectZip.htm

Undesolved · Post by **Undesolved** » Wed Jun 25, 2008 9:56 pm

that looks like it would work.

InfinityAudio · Post by **InfinityAudio** » Wed Jun 25, 2008 10:03 pm

I used Resisto and it really makes a difference...I did the top trunk, the bottomof the trunk and my 4 door. Amazing how the sound is better also

jetas · Post by **jetas** » Wed Jun 25, 2008 10:50 pm

Yea this shit aint guna be happening for a lil longer. I left the car on the street and the street sweeper came by... $40 fine i have to pay by the third.

But anyways yea il post pics when i get it done. If some one else beats me to it post your pics

Swordfish2Cowboy · Post by **Swordfish2Cowboy** » Wed Jun 25, 2008 11:32 pm

Webbing in the trunk? Here is a before picture of my trunk, and its contents:

Donkeypuncher · Post by **Donkeypuncher** » Thu Jun 26, 2008 2:01 am

I think he means the webbing on the underside of the trunk lid. I've got the same trunk rattle and I'm looking for solutions as well.

jetas · Post by **jetas** » Thu Jun 26, 2008 11:53 am

Yea the webbing on the lid. Take off the carpet on the lid and youll see what we mean

TheRandom1 · Post by **TheRandom1** » Thu Jun 26, 2008 12:02 pm

I don't know what webbing you're talking about, unless you mean the actual structural pieces on the lid, and you don't want to remove those... otherwise your lid will flex like a beer can! I would just angle the can in there and spray a bit, should work.