turbo kit

n20sxt · Post by **n20sxt** » Sun Aug 03, 2008 11:25 am

ok so i just purchased a turbo kit for a 96-99 sohc neon from my friend even though i have a 05.... dont ask me why, it was reallly really cheap and in great condition. I just wanna confirm that the bolt pattern is different on the 99 for the turbo mani, in other words it wont bolt up right? i havent picked up the kit yet cause im in montana for the week but whats the easiest path to find a turbo mani? other than that im all set cept for injectors which ill purchase this week. Ill be doing a write up on the install in the next month or 2 so keep a look out

and i dont think im gonna use mega squirt cause i havent heard much good come out of it, just alota bitchin about how much of a pain in the ass it is

krc21 · Post by **krc21** » Sun Aug 03, 2008 1:33 pm

good luck running turbo with an 05 without mega squirt.

INVUJerry · Post by **INVUJerry** » Sun Aug 03, 2008 2:48 pm

If you bought one for a sohc, you'll be good to go, it'll bolt up. YOu need to make sure you have the correct fuel setup, with a 1:1 base regulator, a rising rate regulator, a 255 warlboro fuel pump, some sort of map clamp, and a return fuel line. You're going to boost, and if setup right, you'll be okay, but after a while, the computer will make it so you run at 14.7:1 all the time. It's not too bad, you wont make the most power, but you wont have that great safety edge of running richer like the 95-02 cars can.

Good luck.

n20sxt · Post by **n20sxt** » Sun Aug 03, 2008 5:27 pm

krc21 wrote:good luck running turbo with an 05 without mega squirt.

im pretty sure there is other fuel management systems besides mega squirt... and i dont wanna buy something that i have to assemble that just seems stupid

esteinmaier · Post by **esteinmaier** » Sun Aug 03, 2008 5:29 pm

A megasquirt can be purchased already built for a very reasonable price as compared to any other unit that's as powerful. If you need one, let me know. I can get one for you already assembled.

n20sxt · Post by **n20sxt** » Sun Aug 03, 2008 5:33 pm

invujerry wrote:If you bought one for a sohc, you'll be good to go, it'll bolt up. YOu need to make sure you have the correct fuel setup, with a 1:1 base regulator, a rising rate regulator, a 255 warlboro fuel pump, some sort of map clamp, and a return fuel line. You're going to boost, and if setup right, you'll be okay, but after a while, the computer will make it so you run at 14.7:1 all the time. It's not too bad, you wont make the most power, but you wont have that great safety edge of running richer like the 95-02 cars can.

Good luck.

i was just wondering... so why is there sucha hassle about getting the adapter plate if the 96-99 log mani bolts right up, i looked for 20 min and found like 100 of the cast manis cheap. the kit comes with a t3-t4, will that be to big to keep under 250 untill i get forged rods and pistons?
And the reason i dont wanna do megasquirt is because i dont know anyone that can tune it or is familiar with it. I dont wanna tune it myself cause im not really that good with the whole computer stuff

LionheartedSXT · Post by **LionheartedSXT** » Sun Aug 03, 2008 10:43 pm

esteinmaier wrote:A megasquirt can be purchased already built for a very reasonable price as compared to any other unit that's as powerful. If you need one, let me know. I can get one for you already assembled.

Assembled with the mods needed to run on a neon, like the one to read the factory crank trigger?

Fuzzyneon · Post by **Fuzzyneon** » Sun Aug 03, 2008 10:55 pm

esteinmaier wrote:A megasquirt can be purchased already built for a very reasonable price as compared to any other unit that's as powerful. If you need one, let me know. I can get one for you already assembled.

is this the same as neon squirt? or even a more competitive price?

esteinmaier · Post by **esteinmaier** » Mon Aug 04, 2008 7:36 am

We have a different distributor, but we can offer them at a similar price. If you're looking for MS1, V3, 2.5 BAR MAP, and 12' harness, it looks like we're about $15 less expensive. Although Una's a lot better about custom work, so if what you want is not exactly what I just said, Una may be a better option.

unsuper man · Post by **unsuper man** » Sun Aug 17, 2008 2:15 am

krc21 wrote:good luck running turbo with an 05 without mega squirt.

perhaps the words of someone whos never turbo charged an ngc car.

Nutmeg · Post by **Nutmeg** » Sun Aug 17, 2008 2:34 am

^Holy engine bay

esteinmaier · Post by **esteinmaier** » Sun Aug 17, 2008 7:35 am

unsuper man wrote:
krc21 wrote:good luck running turbo with an 05 without mega squirt.

perhaps the words of someone whos never turbo charged an ngc car.

It's possible to do without, but it's a fight with the ECU the whole time. I tried without, and it wouldn't do what I told it to do, so I did it the "right" way that avoids the 3 or 4 issues the NGC has with boost.

excon · Post by **excon** » Sun Aug 17, 2008 10:56 am

Nutmeg wrote:^Holy engine bay

Yeah, that doesn't even look like a neon engine bay...
The engine is mounted a completely different direction...

INVUJerry · Post by **INVUJerry** » Sun Aug 17, 2008 12:24 pm

unsuper man wrote:
krc21 wrote:good luck running turbo with an 05 without mega squirt.

perhaps the words of someone whos never turbo charged an ngc car.

LOL! Welcome back, and update your sig lol.

hul kogan · Post by **hul kogan** » Mon Aug 18, 2008 2:45 pm

Nutmeg wrote:^Holy engine bay

that is a singled 2JZ, not a neon.

unsuper man wrote:perhaps the words of someone whos never turbo charged an ngc car.

haven't seen you around these parts in a long while. welcome back!

Danteneon · Post by **Danteneon** » Mon Aug 18, 2008 3:00 pm

n20sxt wrote:i was just wondering... so why is there sucha hassle about getting the adapter plate if the 96-99 log mani bolts right up, i looked for 20 min and found like 100 of the cast manis cheap. the kit comes with a t3-t4, will that be to big to keep under 250 untill i get forged rods and pistons?

The only reason you will need an adapter is if the turbo set-up is for a DOHC 2.0. That head uses a SRT-4 bolt pattern (minus 2 bolts) Like invujerry said, if it's a SOHC turbo kit, you will be fine.

unsuper man · Post by **unsuper man** » Tue Aug 19, 2008 7:38 pm

invujerry wrote:
unsuper man wrote:
krc21 wrote:good luck running turbo with an 05 without mega squirt.

perhaps the words of someone whos never turbo charged an ngc car.
LOL! Welcome back, and update your sig lol.

wtf for. everyone seems to love it...

hul kogan · Post by **hul kogan** » Tue Aug 19, 2008 11:21 pm

unsuper man wrote:wtf for. everyone seems to love it...

i'll second that. i say keep it and continue to confuse people...

/threadjack