Radio=P. Brake/ABS Warning Lights

trinity_rush2001 · Post by **trinity_rush2001** » Thu Sep 11, 2008 2:04 pm

so the other day while i was driving i hit a small pot hole nothing major but my radio cut off and my abs and parking brake light turned on for like 2 seconds and then everything went bacl to normal. same thing happened today going to work but w/ a slight bump. it happens sparatically. Any idea of what it could be? a ground maybe? I need help

Craz1000 · Post by **Craz1000** » Fri Sep 12, 2008 9:21 pm

a harness or fuse came loose, if its anything other than that the problem might be serious

trinity_rush2001 · Post by **trinity_rush2001** » Fri Sep 12, 2008 9:36 pm

im check my fuses and harness....it hasnt happened latley so i dnt believe serious....thx

Craz1000 · Post by **Craz1000** » Fri Sep 12, 2008 9:45 pm

actually.... you know what i could be now that i think about it, do you hear a 'DING' when it happens by any chance

trinity_rush2001 · Post by **trinity_rush2001** » Fri Sep 12, 2008 10:54 pm

i believe so only becuase the parking brake light comes on and then the abs light

Craz1000 · Post by **Craz1000** » Sun Sep 14, 2008 1:41 pm

it could be the cluster itself, its loose or theres a bad contact, next time it happens see if it dose a bulb check

moparman00 · Post by **moparman00** » Sun Sep 14, 2008 11:23 pm

i once had issues with my gauge cluster doing the same thing, and it caused me a speeding ticket....i noticed that when i would hit a bump, the radio would go out and come right back, and that the lights would come on for a sec. like when you start the car....well, it got to the point that i would hit a bump, and the radio would go off, and not come back on, and i would realize the gauges and many other features were gone...the first time this happened was on the on ramp to the interstate, got on, and was clocked at 67, in a 55...i investigated all routes that could make this issue happened, and it was that the cluster was loose. took off the dash, pushed in the cluster, tightened the screws, problem solved