Will this fit?
Will this fit?
I found this SRT bumper. Is it any good and would it fit my 05 sxt?
http://stores.cherry-auto.com/Items/CH1000377R
http://stores.cherry-auto.com/Items/CH1000377R
-
theTeejmiester
- 2GN Member
- Posts: 2107
- Joined: Thu Dec 20, 2007 5:05 pm
- Location: klamath falls oregon
- 2k1MotorSport
- 2011 Gold Contributor
- Posts: 2558
- Joined: Mon Aug 14, 2006 6:15 pm
- Location: Lansdale, PA
- orangeblast05
- 2GN Member
- Posts: 359
- Joined: Thu Aug 31, 2006 8:23 pm
- 2k1MotorSport
- 2011 Gold Contributor
- Posts: 2558
- Joined: Mon Aug 14, 2006 6:15 pm
- Location: Lansdale, PA
- sidepipe87
- 2009 Silver Contributor
- Posts: 9501
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
It should.... I don't know about the quality of that one... but as they said, it should with the exception of the washer bottle
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
- LionheartedSXT
- 2GN Member
- Posts: 905
- Joined: Fri Jun 06, 2008 12:34 pm
- Location: Orlando, FL
Isn't the srt-4 hood shorter because of the big front bumper? Would his stock sxt hood fit properly with that?
-Chad
- Feedback
- Project LogMoxHair wrote:pay no attention to the man behind the curtain. Its all smoke and mirrors.
- Feedback
You don't have to change the washer fluid bottle...I really wish people would stop saying that. To just bolt up the bumper, you don't. To wire up the fogs, yeah you will need to remove it or swap it out.
dank(r/t) wrote:you tell 'em altezza light, black headlight cover guy!
you know what's up, it's obvious.
TheRandom1 wrote:Adionik, you're an asshole, we all know this.
- sidepipe87
- 2009 Silver Contributor
- Posts: 9501
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
I'm guessing he wants the fogs he already has......
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
- orangeblast05
- 2GN Member
- Posts: 359
- Joined: Thu Aug 31, 2006 8:23 pm
- orangeblast05
- 2GN Member
- Posts: 359
- Joined: Thu Aug 31, 2006 8:23 pm
- LionheartedSXT
- 2GN Member
- Posts: 905
- Joined: Fri Jun 06, 2008 12:34 pm
- Location: Orlando, FL
LionheartedSXT wrote:Isn't the srt-4 hood shorter because of the big front bumper? Would his stock sxt hood fit properly with that?
-Chad
- Feedback
- Project LogMoxHair wrote:pay no attention to the man behind the curtain. Its all smoke and mirrors.
- Feedback
- orangeblast05
- 2GN Member
- Posts: 359
- Joined: Thu Aug 31, 2006 8:23 pm
- LionheartedSXT
- 2GN Member
- Posts: 905
- Joined: Fri Jun 06, 2008 12:34 pm
- Location: Orlando, FL
I was thinking of doing what you did in that pic with getting an srt-4 hood, did it fit with no problem on your stock sxt front bumper?
-Chad
- Feedback
- Project LogMoxHair wrote:pay no attention to the man behind the curtain. Its all smoke and mirrors.
- Feedback
Pff - wiring up the fogs is part of the "bumper installation".Adionik wrote:You don't have to change the washer fluid bottle...I really wish people would stop saying that. To just bolt up the bumper, you don't. To wire up the fogs, yeah you will need to remove it or swap it out.
It sounds like you would tell me "this radio will fit - if you don't plug the wires in..."
- Graphite SRT
- 2GN Member
- Posts: 519
- Joined: Mon Dec 03, 2007 1:13 pm
orangeblast05 wrote:the bumper is longer ull have a big gap with the sxt hood. so the srt hood is longer than the sxt hood.
A very old pic after it started been repaired from the accident
I think you have that switched around. In that pic their is a big gap with the srt hood and the sxt bumper. Meaning if their was a srt bumper that was brought up to a sxt hood it would overlap the srt bumper
- orangeblast05
- 2GN Member
- Posts: 359
- Joined: Thu Aug 31, 2006 8:23 pm
- sidepipe87
- 2009 Silver Contributor
- Posts: 9501
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
be careful, because that picture quality is crap and you get what you pay for. Just be cautious! Especially if it's aftermarket. It may not fit well.
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus




