Have some questions about how to achive better handling and stopping power using different springs, upgrading to coilovers, questions on swaybars, bushings, different rotors, pads, ect... Having any steering problems or questions about steering racks, tie rods, tie rod ends, ect... ask these questions here.
-
Fuzzyneon
- 2009 Silver Contributor
- Posts: 4872
- Joined: Fri Oct 26, 2007 12:48 am
- Location: Waterford works ,NJ
Post
by Fuzzyneon » Tue Sep 30, 2008 2:09 pm
i hear this creaking sound then i pull into parking spots no popping or anything just creaking when i turn either way. I am lowered on megan coilovers aside from that everything is stock suspension wise any ideas?.
so i got under my car today and i found this on the driver side area(sorry dont know the name for it )

this is what the same thing looked like on the passenger side !

did a bushing rip off? and cause it to bend like that i notice the passenger side has two on the bottom and one on the top and the driver side only has one top and bottom someone help!
Last edited by
Fuzzyneon on Fri Oct 03, 2008 12:11 pm, edited 1 time in total.
Member of Spork Racing
2002 Dodge Neon
Frankenstien
-
bstc00
- 2GN Member
- Posts: 1505
- Joined: Wed Aug 29, 2007 9:55 pm
- Location: auburn hills
Post
by bstc00 » Tue Sep 30, 2008 3:51 pm
i hear the same thing but its only when im turning left.
-
LilSparkPlug
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
Post
by LilSparkPlug » Tue Sep 30, 2008 4:37 pm
How do your bushings look? Tie rod ends okay? Anything rubbing? Everything greased properly?
-
torrent09
- 2GN Member
- Posts: 43
- Joined: Tue Sep 09, 2008 9:08 pm
- Location: Cleveland, OHIO
Post
by torrent09 » Tue Sep 30, 2008 9:53 pm
I actually have this same problem.. everything stock suspension wise.. how do you check the bushings??
-
LilSparkPlug
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
Post
by LilSparkPlug » Wed Oct 01, 2008 8:56 pm
Just look at them, if they look smashed to hell or torn, dry, rotted, cracked, etc. they need to be replaced. IMO they should be upgraded anyways.
-
torrent09
- 2GN Member
- Posts: 43
- Joined: Tue Sep 09, 2008 9:08 pm
- Location: Cleveland, OHIO
Post
by torrent09 » Wed Oct 01, 2008 10:13 pm
are they difficult to replace them yourself or no
-
orangeblast05
- 2GN Member
- Posts: 359
- Joined: Thu Aug 31, 2006 8:23 pm
Post
by orangeblast05 » Wed Oct 01, 2008 11:22 pm
i had a problem just like that and it was everytime i turn when i took it to the mechanic he told that it was only the lug nuts were a little loose. Now the problem i had until last Friday was a broken knuckle from the driver said well not broken just the ball bearing wasn't tight because a huge gap in between the bearing and the knuckle or spindle.
Dodge Neon SXT 05 / Orange Blast/ SRT Clone

-
Fuzzyneon
- 2009 Silver Contributor
- Posts: 4872
- Joined: Fri Oct 26, 2007 12:48 am
- Location: Waterford works ,NJ
Post
by Fuzzyneon » Fri Oct 03, 2008 11:29 am
orangeblast05 wrote:i had a problem just like that and it was everytime i turn when i took it to the mechanic he told that it was only the lug nuts were a little loose. Now the problem i had until last Friday was a broken knuckle from the driver said well not broken just the ball bearing wasn't tight because a huge gap in between the bearing and the knuckle or spindle.
so should i try to tighten my lugs down?
Member of Spork Racing
2002 Dodge Neon
Frankenstien
-
orangeblast05
- 2GN Member
- Posts: 359
- Joined: Thu Aug 31, 2006 8:23 pm
Post
by orangeblast05 » Fri Oct 03, 2008 11:54 pm
u could try and get that swaybar link cheked
Dodge Neon SXT 05 / Orange Blast/ SRT Clone

-
jake_tim
- 2GN Member
- Posts: 871
- Joined: Sat Mar 08, 2008 1:53 pm
- Location: Charlotte, NC
Post
by jake_tim » Sat Oct 04, 2008 1:05 am
Mine does the same thing. I'm getting it checked out my a mechanic during fall break.
-
titansxt
- 2GN Member
- Posts: 2848
- Joined: Wed May 12, 2004 11:24 am
- Location: IL
Post
by titansxt » Sat Oct 04, 2008 5:27 am
Sway bar endlinks will always make a noise no matter what but if the noise is when you turn it could be a lot worse. That is a sound that the tie rods make when they are about to go. If that is the case they need to get replaced NOW. Also the lower control arms on our cars like to crap out for whatever reason.

2003 SXT
2005 SRT-4
2gn.org member #26

Lemon Neon member #1.
Any or all of the above statement(s) may be entirely fictional and a fabrication.
ram50rocket wrote:
I must had been mistaken in thinking that NEONS.ORG was just for neons.
-
Wenuden
- 2GN Member
- Posts: 2554
- Joined: Fri Apr 06, 2007 11:53 pm
- Location: Alexandria, Va
Post
by Wenuden » Sat Oct 04, 2008 12:26 pm
It appears that your end link is fucked, dude. The car must be handling like total ass. You could replace it with a stock end-link, a prothane end link kit, or get upgraded sway bars and new end links. I'd go for the latter option.
-
Fuzzyneon
- 2009 Silver Contributor
- Posts: 4872
- Joined: Fri Oct 26, 2007 12:48 am
- Location: Waterford works ,NJ
Post
by Fuzzyneon » Sat Oct 04, 2008 1:07 pm
Wenuden wrote:It appears that your end link is fucked, dude. The car must be handling like total ass. You could replace it with a stock end-link, a prothane end link kit, or get upgraded sway bars and new end links. I'd go for the latter option.
im gonna do sway bars yeah i noticed my handling getting worse and worse and also an update
i think it might be my steering column cause when i stand outside the car and turn the wheel i don't really hear it but inside the car its loud and clear? anyone know of any recalls on that?
Member of Spork Racing
2002 Dodge Neon
Frankenstien
-
Donkeypuncher
- 2GN Member
- Posts: 2183
- Joined: Wed Mar 12, 2008 6:14 am
- Location: Dallas, Tx
Post
by Donkeypuncher » Sat Oct 04, 2008 8:07 pm
There was a TSB issued for the steering column, something about realigning it but no recall. So if you have no warranty left I doubt they will fix it. Mine makes a little noise, but I don't feel like messing with it.
-
Fuzzyneon
- 2009 Silver Contributor
- Posts: 4872
- Joined: Fri Oct 26, 2007 12:48 am
- Location: Waterford works ,NJ
Post
by Fuzzyneon » Sun Oct 05, 2008 11:24 am
well the more i listen i drove to work today 30 minute drive with no radio on just hearing any sounds and i heard nothing i think it may be my steering column though i didnt see anything off when i looked underthere but the end link. ive had steering components go bad on a intrepit ive had but this doesnt sound the same at all. still open for thoughts though
Member of Spork Racing
2002 Dodge Neon
Frankenstien