New exhuast: Commin out the passanger side PICS

nodestiny · Post by **nodestiny** » Tue Aug 23, 2005 2:30 pm

Here is my newest exhuast setup. Its 2.25" piping to a custom made (house brand) muffler (kinda spendy, but life time warranty). I also have the 18" glasspack up front, so the sound (inside the cab) is nearly inaudible (hear my intake WAY more). The outside has a bit of sound to it. About what i was after.

Whatcha think?

Stonebender · Post by **Stonebender** » Tue Aug 23, 2005 2:40 pm

Well, that sure is different.

unsuper man · Post by **unsuper man** » Tue Aug 23, 2005 3:23 pm

actually. i comletly love that. i tihnk that may be the best exhuast ive ever seen on a neon, period. are cars are diffacult to make look good due to ugly lines iMO, and i LOVE that idea...screw you for doing it first.

DjTransifi · Post by **DjTransifi** » Tue Aug 23, 2005 3:38 pm

I have to agree it's different....., but it looks really good.. Good job...

nodestiny · Post by **nodestiny** » Tue Aug 23, 2005 5:29 pm

A lot of people are telling me to dual it out, one on each side... think i should do it? Definatly considering it...

ilpadrino · Post by **ilpadrino** » Tue Aug 23, 2005 5:37 pm

I would do the dual (on both sides). I totally agree with those here though that that looks great. Looks very professional. Well done.

SupaDawg · Post by **SupaDawg** » Tue Aug 23, 2005 6:16 pm

looks great. low profile and clean. great job.

Hopefully she's not too loud outside of the car... drives me nuts when exhaust is stupid loud outside.

Stonebender · Post by **Stonebender** » Tue Aug 23, 2005 6:27 pm

unsuper man wrote:actually. i comletly love that. i tihnk that may be the best exhuast ive ever seen on a neon, period. are cars are diffacult to make look good due to ugly lines iMO, and i LOVE that idea...screw you for doing it first.

Dude, are you drunk or something?

evlneon · Post by **evlneon** » Tue Aug 23, 2005 8:12 pm

wow. good job! i like it. i'd say leave it how it is.

just be sure to watch the heat on the tip that it doesn't get too hot and melt the bumper around it. maybe get a piece of metal cut to fit in the cut-out to prevent that from happening.

Smoke · Post by **Smoke** » Tue Aug 23, 2005 8:55 pm

That is awsome, the dual exit would be insane, DO IT.

grambo · Post by **grambo** » Tue Aug 23, 2005 10:26 pm

It looks like a divorced waste-gate. VERY cool. You should put a stainless steel ring around the opening to finish the look! That is badass dude.

dblsg · Post by **dblsg** » Wed Aug 24, 2005 2:18 am

thumbs up all the way

nodestiny · Post by **nodestiny** » Wed Aug 24, 2005 9:06 am

grambo wrote:It looks like a divorced waste-gate. VERY cool. You should put a stainless steel ring around the opening to finish the look! That is badass dude.

Yeah, as a few of you have said, i DO plan to do this. Have planned it for a while. Im waiting for school to come back (work at a school district) and ill talk to the teacher with the plasma cutter and see if i cant get one custom made, perfect fit

grambo · Post by **grambo** » Wed Aug 24, 2005 11:07 am

Sweet. See if the teach will make two units to fit in my ACR's cut-outs and I'll buy em' no question!

unsuper man · Post by **unsuper man** » Wed Aug 24, 2005 11:12 am

Stonebender wrote:
unsuper man wrote:actually. i comletly love that. i tihnk that may be the best exhuast ive ever seen on a neon, period. are cars are diffacult to make look good due to ugly lines iMO, and i LOVE that idea...screw you for doing it first.
Dude, are you drunk or something?

i hate neons, thats why i think this...

J-Villa · Post by **J-Villa** » Thu Aug 25, 2005 3:05 am

that looks good....get a pic of the whole side of the car

Ifixyawata · Post by **Ifixyawata** » Thu Aug 25, 2005 3:17 am

Looks like factory... if the factory ever did anything that puuurdy.

BlackRoseRacing · Post by **BlackRoseRacing** » Thu Aug 25, 2005 7:00 am

duals would be great, youll need a crossflow muffler to do that though...
as for the fascia, my 03 SXT melted the rear fascia when I had an SRT system on it..the tips get HOT....
As for your setup though, im pretty sure your muffler is absorbing all the heat like my flowmaster does on my R/T. So the tips MIGHT not get that hot. The trim ring idea is not a bad thought though....
http://cgi.ebay.com/ebaymotors/1964-65- ... enameZWDVW

03sxt · Post by **03sxt** » Thu Aug 25, 2005 7:55 am

I think it looks great! I'd do the trim idea, though, around the tips just to stay on the safe side... Plus it'd look a little more finished, if you know what I mean. Good job!

nodestiny · Post by **nodestiny** » Thu Aug 25, 2005 9:03 am

Yeah the tips get silly hot. If you do anything other than tap the metal, it will burn you! It will melt the plastic too... did just a bit, but did some adjustment and it is fine now.

I DO HAVE A VIDEO! Has the sound and more footage of the car. NEED A HOST!

TNK · Post by **TNK** » Thu Aug 25, 2005 5:36 pm

that looks fuckin' rad d00d! i love it!

03sxt · Post by **03sxt** » Thu Aug 25, 2005 6:19 pm

Here's the lower quality video (56k Friendly)

Rick click, save as...

The high quality one will be coming as soon as I get the file.

scneonchic · Post by **scneonchic** » Thu Aug 25, 2005 8:02 pm

nice!!!

thats an orignal idea, im gonna go w/ the majority here and say that id add another one on the other side too, just fix it so it doenst melt the bumper of course, props for a great idea!

DJ CptnCrnch · Post by **DJ CptnCrnch** » Sat Aug 27, 2005 10:02 am

ive never seen a side exhaust coming from the bumper...ive seen it in front of the back wheel before. Im not sure how i feel abotu that exhaust...it is orginal, and it looks good, but i dont think i would ever do it to my car...

05srt4clone · Post by **05srt4clone** » Sat Aug 27, 2005 11:41 am

That sounds bad ass. All you have is a 18" glasspack and that muffler? Where can I get that muffler or what is it compared to?

CU_rob · Post by **CU_rob** » Sun Aug 28, 2005 1:43 pm

sounds good... and looks good too.

where did you get your grounding kit from?

nodestiny · Post by **nodestiny** » Mon Aug 29, 2005 10:23 am

03sxt wrote:Here's the lower quality video (56k Friendly)

Rick click, save as...

The high quality one will be coming as soon as I get the file.

Thanx! The HQ is just better video really... but ill see if i cant get it sent (every time i try i get errors!!! might compress a hair more... DAMN MSN!)