2gen going turbo...ATX also

[phazeneon]

alright, i've gotten turbo, exhaust manifold, intercooler, BOV, and what else off of an srt4? been reading the threads, so im looking in to working on the bottom end (pistons, rods), and top end (cams, camshaft, valve springs). any info would be great... i'll post pics off what i have as soon as i get time to...

[hul kogan]

read/search the FI area of the forum. answers are a plenty!

a few good places to start:
viewtopic.php?t=4549 (SRT-4 turbo setup)
viewtopic.php?t=32908 (adapter plate specs, for SRT-4 turbo)
viewtopic.php?t=20179 (turbo, in general)

[phazeneon]

thanx!!!

[Oil-leak]

alright, i've gotten turbo, exhaust manifold, intercooler, BOV, and what else off of an srt4? been reading the threads, so im looking in to working on the bottom end (pistons, rods), and top end (cams, camshaft, valve springs). any info would be great... i'll post pics off what i have as soon as i get time to...

Off of an SRT4 you will need.
Stage 0 injectors
coolant feed and return line
oil feed and return line
O2 housing and down pipe.


You should get the Stock srt4 O2 housing, it's the part that connects to the turbofold.

[Wenuden]

Forget about the stock o2 housing, it's a huge restriction (2 1/4" o2 inlet mated to an almost 3" outlet on the turbofold). Just spend the money on a used or new full-3" maxxfab unit. It's one of those pieces you might not notice w/o it, but if you go stock and ever upgrade, you'll be blown away. Plus it's a bitch to replace w/ the motor in/assembled.

[Adionik]

I recently got my maxxfab 3" o2 housing and compared it to the stock o2 housing....it's hilarious. Deffinetely out the other $100 and get it.

I have a stock o2 housing I would let go super cheap if you wanted though