Boosted 2005 SXT

Do you have a project going or will you be starting a project here very soon and just want to keep a log of everything you and when? Share with everyone every step of the way what sort of progress you are making on your project.
Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Boosted 2005 SXT

Post by Addicted2Boost » Wed Jan 14, 2009 12:59 am

[center]

My Parts List
Exhaust Depot 3in DP w/high flow cat
AGP Coolent over flow tank
Ebay custom fab catch can
SRT Stock Exhaust
SRT InterCooler
SRT Boost Guage
SRT Fuel Rail
SRT o2 housing
SRT Fuel Pump
SRT gauge cluster - Installed
SRT shifter - Installed
SRT stage 1 injectors 577's
Custom Turbo Manifold T3 Flange
OBX BIG TURBO .60 trim
OBX 38MM external wastegate
Stwiert Warrner gauges
AEM ugeo wideband
Custom return oilpan
Moroso fittings
Felpro Hi temp gaskets
HKS SSQV Blow Off Valve
2.5" IC piping and red couplers
HKS 38mm Dumptube
Custom cast iron 5bolt to 2.5" vband
Custom incabin manual boost controller
1gn Neon Metal Valve Cover Sandbeaded then powder coated chrome
MegaSquirt v3.0 M2 upgrade with spark control EMS
1 x Megasquirt Configuration Service (SVC-1-003)
Application 420A
1 x Megasquirt Processor (MS-II) Upgrade Service (SVC-2-003)
MS-II Daughtercard
1 x Megasquirt Coolant Temperature (CLT) Sensor (SN-2-001)
1 x Megasquirt Intake Air Temperature (IAT) Sensor (SN-2-002)
1 x Premium Megasquirt Harness (EMG-2-002)
Harness Length Standard 6'
1 x Megasquirt Comm Cable (EMG-2-001)

Exterior and Extras
SRT front bumper
SRT Carbon Fiber Hood
Tinted side markers
Tinted Tails
RSL elites Rims Nankang tires 205/40/17
Tein STechs lowering springs -1.8"
Tripple Gauge Piller Black
Kenwood 6 speaker setup 1000w amp sony 12"
Carbon Fiber Hood locks


Parts Coming Soon:


AGP return fuel line kit
Depo Projector BLACK Headlights
AEM Water/Methanol Injection system
RC Fuel Injectors "750"
Walbro High Flow Fuel Pump
AEM Air Intake
MPx Dual Exit Exhaust System
MPx Underdrive Pulley
Powerslot Rotors
Hawk HPS STREET FRONT Brake Pads
Fidanza Clutch level 5.4
Booger Shift Linkage Bushings
Fidanza Aluminum Flywheel
Eagle connecting rods
Mopar OEM Rod Bearings
JE Turbo Low compression Pistons
JE Piston Rings
INDY Intake Manifold
MPx 60mm Throttle Body
BC Coilover Suspension



pics coming soon[/center]Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Image
Image
Image
Image
Image
Last edited by Addicted2Boost on Mon Apr 27, 2009 6:49 pm, edited 5 times in total.

Speeder
2GN Member
Posts: 772
Joined: Sun Dec 28, 2008 9:28 pm

Post by Speeder » Wed Jan 14, 2009 10:01 pm

sweet!!!!
-Adam
2010 Jeep Liberty
2003 Dodge Neon SXT ATX SOLD :mopar: :eekdance:

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Fri Jan 16, 2009 6:16 pm

Last edited by Addicted2Boost on Thu Feb 12, 2009 12:54 am, edited 1 time in total.

hybrid-Srt2001
2GN Member
Posts: 2759
Joined: Mon May 28, 2007 6:06 am
Location: reno/cali
Contact:

Post by hybrid-Srt2001 » Tue Jan 27, 2009 2:38 am

looks good, but clean your car while you're at it.

Speeder
2GN Member
Posts: 772
Joined: Sun Dec 28, 2008 9:28 pm

Post by Speeder » Tue Jan 27, 2009 7:45 pm

:withstupid:
-Adam
2010 Jeep Liberty
2003 Dodge Neon SXT ATX SOLD :mopar: :eekdance:

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Wed Feb 11, 2009 10:34 am

:tardbang:
Last edited by Addicted2Boost on Sun Apr 12, 2009 1:28 am, edited 1 time in total.

measy27
2GN Member
Posts: 1871
Joined: Sun Jan 13, 2008 8:58 pm
Location: Chicopee,Ma

Post by measy27 » Wed Feb 11, 2009 12:57 pm

Nice... Cant wait to see it all come together...
'06 Nissan Murano S AWD

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Wed Feb 11, 2009 1:23 pm

OMFG Your interior...I just cried. Holy hell my OCD is on overload and that's just a picture!!!

Sounds like a nice project though :)

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Thu Feb 12, 2009 12:58 am

got the turbo garret T25

Image
Image
Image
Image
This is basically what its like on the car
Image

hybrid-Srt2001
2GN Member
Posts: 2759
Joined: Mon May 28, 2007 6:06 am
Location: reno/cali
Contact:

Post by hybrid-Srt2001 » Thu Feb 12, 2009 1:52 am

looks like ur getting a good collection of parts. good luck with the build.

BlackRT?
2GN Member
Posts: 683
Joined: Tue Jan 16, 2007 9:24 am

Post by BlackRT? » Thu Feb 12, 2009 8:37 pm

those look my my buddies old boost pipes... gunmetalsxt.... Looks like a good project..
aspturbo.com
98 r/t 1gen 2.4l crane 22s batmowheel 366
e85 because racecar

2000 srt4 35r crane 18s aem ems daily driver

hybrid-Srt2001
2GN Member
Posts: 2759
Joined: Mon May 28, 2007 6:06 am
Location: reno/cali
Contact:

Post by hybrid-Srt2001 » Thu Feb 12, 2009 11:43 pm

damn you're getting a lot of parts fast. its taken me almost a year to get my build together.

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Fri Feb 13, 2009 2:24 am

thanks guys and yea there gunmetals im almost complete just need a few DSM parts for my turbo and injectors and all the supporting gauges and im good to go until i do internals in july

measy27
2GN Member
Posts: 1871
Joined: Sun Jan 13, 2008 8:58 pm
Location: Chicopee,Ma

Post by measy27 » Fri Feb 13, 2009 6:41 am

Nice.....
'06 Nissan Murano S AWD

racer12306
Junior Admin
Posts: 16012
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Fri Feb 13, 2009 9:44 am

If you are aiming to hit 30psi of boost, you will need a bigger intercooler. You will heat soak a stock SRT intercooler pretty quick.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Fri Feb 13, 2009 10:44 am

This set up I'm doing now is to help me with my boost addiction the turbo IC and injectors will be replaced in july

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Fri Feb 13, 2009 11:52 am

WTF is the HKS Special Fin? I've never seen such a thing. Or is it just another one of those inserts that changes sound?

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Fri Feb 13, 2009 1:15 pm

LilSparkPlug wrote:WTF is the HKS Special Fin? I've never seen such a thing. Or is it just another one of those inserts that changes sound?
it changes the sound frequency there is a purple one too
The HKS SSQV silver triple-fin discharge design produces a powerful and unique aggressive blow-off sound along with added visual distinction.

Additional triple-fin inserts are available in gold (standard high frequency sound) for visual appeal and in purple metallic (emits a lower frequency sound than both the standard and gold SSBV inserts) for an alternate sound and appearance. SSQV inserts are easily interchangeable within minutes.

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Fri Feb 13, 2009 3:52 pm

It finally came in today thanks to symtech lab MS2 v3 Image
Image
Image
Image
Image

User avatar
Cabbs
2GN Member
Posts: 853
Joined: Tue Mar 13, 2007 11:22 pm
Location: Kent, Washington
Contact:

Post by Cabbs » Fri Feb 13, 2009 5:22 pm

Does the Special Fin make it more annoying or less annoying? I've heard SSQ's can get really loud.

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Fri Feb 13, 2009 5:24 pm

haha i believe more annoying =)

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Wed Mar 18, 2009 9:18 am

Image
Image
Image
Image
Image
Image
Image

User avatar
MyNeonSaysHi
2GN Veteran
Posts: 11507
Joined: Mon May 23, 2005 8:46 pm
Location: Kansas

Post by MyNeonSaysHi » Wed Mar 18, 2009 10:47 am

So you are going with a different turbo now? What is all left that you need to get?

08 Acura TL-S
05 Neon SRT-4

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Wed Mar 18, 2009 11:16 am

yes im using an obx .63 trim turbo and just he gauges im buying the waste gate tial 38 MM hks dump tube today and down pipe needs to be made

ZeroChad
2009 Gold Contributor
Posts: 3165
Joined: Sat Sep 01, 2007 11:08 pm
Location: Austin, Tx
Contact:

Post by ZeroChad » Wed Mar 18, 2009 11:40 am

Coming along nicely!

I'm looking at doing megasquirt soon too. I'm thinking about messing around with easytherm and using the stock sensors though. Have you given any thought to that?

Where did you find your manifod? Is that the T3/T4 SOHC one from ebay? What are you planning to do for a downpipe?
Old Neon Log | Feedback

2000 - Corvette Coupe
2002 - Neon SE Fully Built (scrapped)

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Wed Mar 18, 2009 11:54 am

i bought the manifold off esteinmaier i already bought the sensors for the ms AIT and coolent maybe making a custom L fitting for the sensors as far as the down pipe it will be custom made at the local exhaust shop i will drive there with no muffler lol just turbo its a mile away

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Wed Mar 18, 2009 3:56 pm

Damn you got everything wicked fast. I'll have to hear your SSQV with that insert in it and see if I like it compared to mine.

Addicted2Boost
2GN Member
Posts: 1079
Joined: Sun May 11, 2008 6:05 pm

Post by Addicted2Boost » Wed Mar 18, 2009 4:01 pm

LilSparkPlug wrote:Damn you got everything wicked fast. I'll have to hear your SSQV with that insert in it and see if I like it compared to mine.
i returned my engagement right i bought for for my ex and i bought car parts :thumbup:

NeonOn19s
2GN Member
Posts: 2074
Joined: Mon Nov 07, 2005 11:44 am
Location: Spring,TX

Post by NeonOn19s » Wed Mar 18, 2009 5:18 pm

sweet. looking good
| Nathan |
Image


Official "I'm Going to Drive My Neon til it Dies" Club Member # 72
Semper Fi!!! USMC

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Wed Mar 18, 2009 6:59 pm

LOL damn straight cars before marriage!!!

Post Reply

Return to “Progress/Project Log”