those of you that have 00-02 ebay/mpx projectors.. a ?

Got a question on outside appearance modifications. Questions about body kits, exterior lighting, just anything thats a visual mod on the "exterior" of the car. Ask those questions here.
Post Reply
jT
2GN Member
Posts: 1099
Joined: Tue Jul 04, 2006 2:37 am

those of you that have 00-02 ebay/mpx projectors.. a ?

Post by jT » Tue Jan 27, 2009 4:29 am

hows your light output? specifically if you put in HID's. . hows the light pattern?

over the forum outage i installed my projectors and hid kit.. and am very disappointed with them. from seeing everyone's pictures on here i had certain expectations.. but i think all your cameras jacked up the light output in night mode function!

i do need to adjust the aim some more, but regardless i have circles of light up in the air above the cut off line... do you?

overhead signs are lit up like the face of the sun... while the ground is so-so .. better than stock with halogen but still so-so

in some instances i can even see a jagged teeth-like pattern from something in the projector in those overhead circles...

i'm trying to determine if i got a bad set or if they are all like this and just nobody has really mentioned it. at the moment i feel a little bit like i should not have wasted the money.

User avatar
jetas
2GN Member
Posts: 1908
Joined: Sat Dec 01, 2007 3:57 pm
Location: Killa Cali

Post by jetas » Tue Jan 27, 2009 12:23 pm

Im happy wit the light output. my stocks sucked. i too have the two circle shits above the cutoff but then again their not adjusted all the way correct. It irritates me too but im dealing wit it. try adjusting them more it may correct it
-J.J. | Official I sold my Neon Member #008
86.5 Nissan Hardbody LB- will be for sale soon...

1989 Yota PU- "Tammy" -Rest In Pieces...

2000 Plym Neon- "Stacy" -Sold 3/25/09 =(
Ntyvirus1 wrote:im debadged so i just drive a gray thing.

User avatar
kornholio788
2GN Member
Posts: 1296
Joined: Sun Jan 08, 2006 11:08 pm
Location: Racine, WI
Contact:

Post by kornholio788 » Tue Jan 27, 2009 2:36 pm

I have them. Have HIDS hooked up to them. 8k. My friend has a TL so they look like shit compared to hers. But mine are better than teh stock neon headlights so they were good enough for me lol. I more or less got them because they looked cool. haha.
2000 Dodge Neon................FULLY BAGGED AND LAID OUT!!...................All Show
Image
theTeejmiester wrote:haha it needs a six foot wing and color change paint and neons to be your style :shock: ...

ZeroChad
2009 Gold Contributor
Posts: 3165
Joined: Sat Sep 01, 2007 11:08 pm
Location: Austin, Tx
Contact:

Post by ZeroChad » Tue Jan 27, 2009 9:21 pm

This is the best pics I have of my output. The only thing I don't like is that the light output doesn't have the glare needed to illuminate street signs properly, so its slightly harder to drive if you don't know where you're going. Also, it seems to me that the projector style projection doesn't cover the direct left and right of the car as the stockers did.
Image
Image
Image
Old Neon Log | Feedback

2000 - Corvette Coupe
2002 - Neon SE Fully Built (scrapped)

joseph_hac
2GN Member
Posts: 166
Joined: Sat May 12, 2007 2:05 am
Location: Mississauga, Ontario, Canada

Re: those of you that have 00-02 ebay/mpx projectors.. a ?

Post by joseph_hac » Tue Jan 27, 2009 9:43 pm

jT wrote: i do need to adjust the aim some more, but regardless i have circles of light up in the air above the cut off line... do you?

overhead signs are lit up like the face of the sun... while the ground is so-so .. better than stock with halogen but still so-so
I've got the 03+ projectors and HIDs, but have not installed them yet so I cannot speak from experience. Could it be that they are designed to throw a bit of light up above the cutoff line to light up reflective road signs?
Image

srtgtr34
2GN Member
Posts: 896
Joined: Tue Jul 01, 2008 8:52 am
Location: Cleveland

Post by srtgtr34 » Tue Jan 27, 2009 10:09 pm

ZeroChad wrote:This is the best pics I have of my output. The only thing I don't like is that the light output doesn't have the glare needed to illuminate street signs properly, so its slightly harder to drive if you don't know where you're going. Also, it seems to me that the projector style projection doesn't cover the direct left and right of the car as the stockers did.
Mine light up road signs perfectly and I aimed my porjectors outwards slightly so I can get the light to go left and right.


My projectors don't have any light above the cut off line, so myabe you have a defective projector.

jT
2GN Member
Posts: 1099
Joined: Tue Jul 04, 2006 2:37 am

Post by jT » Wed Jan 28, 2009 12:31 am

i guess its hit or miss on these things (as is basically what has been said about them)

how do you aim yours left/right? theres only up/down isnt there?

i dont have my camera with me tonight but maybe one of these nights ill try to get some pics

User avatar
jetas
2GN Member
Posts: 1908
Joined: Sat Dec 01, 2007 3:57 pm
Location: Killa Cali

Post by jetas » Wed Jan 28, 2009 1:15 am

Naw theres 2 bottle cap looking things that u need to turn wit a screwdriver. There should be one rite by the fender and another that u can only see thru a hole in the radiator support shit
-J.J. | Official I sold my Neon Member #008
86.5 Nissan Hardbody LB- will be for sale soon...

1989 Yota PU- "Tammy" -Rest In Pieces...

2000 Plym Neon- "Stacy" -Sold 3/25/09 =(
Ntyvirus1 wrote:im debadged so i just drive a gray thing.

jT
2GN Member
Posts: 1099
Joined: Tue Jul 04, 2006 2:37 am

Post by jT » Wed Jan 28, 2009 4:42 am

hmm yeah.. those are the up/down... or is the one closet to the blinker left/right? i thought it was up/down for the high beam

i lowered the beams quite a bit but now the circles of light are more where the high beams should be, so ill probably get flashed by other drivers more than i was before... and maybe cops .. heh

Tam
2GN Member
Posts: 3090
Joined: Wed Jul 09, 2008 2:41 am
Location: New Orleans, Louisiana

Post by Tam » Wed Jan 28, 2009 9:37 am

ZeroChad wrote:The only thing I don't like is that the light output doesn't have the glare needed to illuminate street signs properly, so its slightly harder to drive if you don't know where you're going. Also, it seems to me that the projector style projection doesn't cover the direct left and right of the car as the stockers did.
Doesn't your LED signals take care of the street signs? I know what you mean since my headlights don't illuminate the signs too, but my white LED signals take care of that and light it up very well.

User avatar
jetas
2GN Member
Posts: 1908
Joined: Sat Dec 01, 2007 3:57 pm
Location: Killa Cali

Post by jetas » Wed Jan 28, 2009 11:24 am

viewtopic.php?t=32526
After looking at this thread the one by the fender is apparently dor the high beam kinda wierd but ok
-J.J. | Official I sold my Neon Member #008
86.5 Nissan Hardbody LB- will be for sale soon...

1989 Yota PU- "Tammy" -Rest In Pieces...

2000 Plym Neon- "Stacy" -Sold 3/25/09 =(
Ntyvirus1 wrote:im debadged so i just drive a gray thing.

Post Reply

Return to “Exterior”