Have some questions about how to achive better handling and stopping power using different springs, upgrading to coilovers, questions on swaybars, bushings, different rotors, pads, ect... Having any steering problems or questions about steering racks, tie rods, tie rod ends, ect... ask these questions here.
-
Paralyzer
- 2GN Member
- Posts: 789
- Joined: Tue Dec 20, 2005 3:40 pm
- Location: Gallatin, TN
Post
by Paralyzer » Sat Feb 14, 2009 8:51 pm
-
NickKo
- 2009 Gold Contributor
- Posts: 2248
- Joined: Sun Jun 11, 2006 11:24 am
- Location: IL./WI.border
Post
by NickKo » Sat Feb 14, 2009 9:16 pm
Hey, there are bigger mistakes...... I have heard of worse things happening.
Don't beat yourself up too much..... There's no 'damage' and it's easily fixed.....
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-
LilSparkPlug
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
Post
by LilSparkPlug » Sat Feb 14, 2009 9:25 pm
You aren't the first....and you won't be the last. ALOT of people have done the same thing.
-
GreeNeons03
- 2GN Member
- Posts: 1335
- Joined: Sat Mar 15, 2008 8:31 pm
- Location: Tampa, FL
Post
by GreeNeons03 » Sat Feb 14, 2009 9:30 pm
Yep, your a dumb ass.

J/K man.

LilSparkPlug wrote:Polish her....females like that better than slathering! Yeah...I went there.
CLICK ME!
Official "Drive My Neon till it Dies" Club Member #8
-
Paralyzer
- 2GN Member
- Posts: 789
- Joined: Tue Dec 20, 2005 3:40 pm
- Location: Gallatin, TN
Post
by Paralyzer » Sat Feb 14, 2009 10:51 pm
I know I have seen it happen but man I personally can't believe I did that myself. My taillights are so freakening high that it looks like a bigfoot.
Anyone want rake......

-
hansken_yo
- 2GN Veteran
- Posts: 5148
- Joined: Wed Oct 11, 2006 10:54 am
- Location: Washington
Post
by hansken_yo » Sat Feb 14, 2009 11:43 pm
Man... I've done stupid things like forget to tighten the bolts on my ball joints and gouge the shit out of my rotors as a result. So don't hurt yourself, this is just one of those silly lessons that you can laugh about later

| - John || Project Log || Official I'm Going To Drive My Neon Till It Dies Club #000001 |
Everyone knows that for breasts to be "perfect" they need to be within reach.
-
Mr Josh Zombie
- 2010 Platinum Contributor
- Posts: 8357
- Joined: Tue Aug 22, 2006 8:43 pm
- Location: Toledo, OH
Post
by Mr Josh Zombie » Sat Feb 14, 2009 11:48 pm
I did it too

Modify your Car • Modify your Body • Modify your Life
-
OB
- Former Moderator
- Posts: 9686
- Joined: Tue Nov 15, 2005 9:38 pm
- Location: Bay Area, CA
Post
by OB » Sun Feb 15, 2009 9:26 am
I got one to make you feel better. Back in the day, I once attempted to beat the front strut onto the rear. The springs were on right, though.

-
TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
Post
by TheRandom1 » Sun Feb 15, 2009 12:15 pm
I actually kind of like that raked look... pics?

Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.
-
INVUJerry
- 2GN Veteran
- Posts: 6604
- Joined: Mon Nov 21, 2005 9:55 pm
- Location: Hanover, PA
-
Contact:
Post
by INVUJerry » Sun Feb 15, 2009 1:06 pm
Yeah man, take pics.

So many neons so little time.
-
Paralyzer
- 2GN Member
- Posts: 789
- Joined: Tue Dec 20, 2005 3:40 pm
- Location: Gallatin, TN
Post
by Paralyzer » Sun Feb 15, 2009 10:20 pm
well i fixed the issue today, and i was going to snap some pics of it before I fixed it but didn't get a hold of a camera and didn't have much time to look for one, so I went ahead and fixed it the way it needed to be. God, how much I have messed a comfy ride!! I know I have wheel gap again, but that is ok. I will throw 18's on it and be happy. plus I don't have the kit on it and the graphics are coming off tomorrow so the car will be stock except of the tint and no side molding.
I will miss the look I had, but I had to get better ride quality. I am ready to settle down for the wedding and ready to start a family soon. Plus I want to be able to have people ride with me as well in the back and people couldn't do it bfore due to the blown struts, and rear sagging due to audio. Now I have dents in my roof from people bouncing up and down and their heads hitting it. Oh well. The good times.......
-
Tam
- 2GN Member
- Posts: 3090
- Joined: Wed Jul 09, 2008 2:41 am
- Location: New Orleans, Louisiana
Post
by Tam » Tue Feb 17, 2009 11:45 am
Lol, dents in the roof. Do you have OEM struts? If that's the case, you could've solved the ride quality problem by simply putting in some tokicos struts. Those things are the bomb! My car feels just like stock ride, maybe a little better too. I was suprised at how comfy the ride is.
-
occasional demons
- Junior Admin
- Posts: 20064
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Post
by occasional demons » Wed Feb 18, 2009 8:27 pm
I have eibachs and tokicos, while it isn't bad on normal stuff, it isn't nearly as compliant as the OEM struts/springs were. The oem took rough terrain far better than my Cherokee could ever dream of. (Ride quality wise, durability would be another story)
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap