Shorty Antenna...
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
- DetergentCandy
- 2GN Member
- Posts: 1197
- Joined: Sun Sep 27, 2009 8:13 pm
- Location: Phoenix
I've got the MPX shorty...works great around town. Reception can get kinda fuzzy around tall buildings and such...but nothing to cry about. So it's not crystal clear - that's what CDs and MP3s are for.
02 Neon R/T(Blackula) - Old and busted
05 SRT-4(Serenity) - Sold
20th Anniversary Golf GTI - Sold
05 SRT-4 - New hotness
05 SRT-4(Serenity) - Sold
20th Anniversary Golf GTI - Sold
05 SRT-4 - New hotness
LilSparkPlug wrote:Mmmm beefy
-
darthroush
- 2GN Member
- Posts: 1637
- Joined: Tue Jul 14, 2009 2:14 am
- Location: People's Republic of Kalifornia
98.5 about 99% of the time, one station in the low 90s sometimes, and then 100.5 up to 107.9. Where I live, there's really only two spots I don't get reception with it. In the parking garage at the casino (which is down in between two mountains a bit) and part of the way down Hwy 88 when it is tucked right in beside the "wrong side" of the mountain. Other than those two spots, I don't recall losing reception anywhere else I go or have gone with it.
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
detergent- yea i do have cds and ipods to listen to. however i get bored of them from time to time. also i have an aftermarket stereo which im not sure if that is part of the cause to the crappy reception as well or if its just where i live.
darthroush- thanks for the frequencies they are similar to what i listen to here in ohio so that was a big help thanks.
darthroush- thanks for the frequencies they are similar to what i listen to here in ohio so that was a big help thanks.
-
racer12306
- Junior Admin
- Posts: 16015
- Joined: Sun Oct 24, 2004 8:53 pm
- Location: Baltimore, MD
- Contact:
I never really had a problem with reception on mine when i had it.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
I bought a shorty and with my aftermarket radio it sucked major ass. I cut down my stocker and it works perfectly almost all the time. The only time I have troubles is when I listen to some AM stations.
FM is fine though. I listen to stations all the way up the dial, from 92.7 to 105.9 without any more issues than what I had with a full length one.
FM is fine though. I listen to stations all the way up the dial, from 92.7 to 105.9 without any more issues than what I had with a full length one.

Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
-
racer12306
- Junior Admin
- Posts: 16015
- Joined: Sun Oct 24, 2004 8:53 pm
- Location: Baltimore, MD
- Contact:
How in the hell did you do that?
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
no EZout and i instantly thought junk yard when it happened. i think i might get a new to me receiver and then try to tap out the one im replacing. the metal that is in the receiver is aluminium so it might be easy to get out.
racer- i was trying to twist the shorty off and it wouldn't budge so i grabbed some vice grips and tried with those and the aluminium sheared right off.
racer- i was trying to twist the shorty off and it wouldn't budge so i grabbed some vice grips and tried with those and the aluminium sheared right off.
Last edited by orangeneon05 on Wed Oct 20, 2010 1:20 pm, edited 1 time in total.
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
-
racer12306
- Junior Admin
- Posts: 16015
- Joined: Sun Oct 24, 2004 8:53 pm
- Location: Baltimore, MD
- Contact:
Clockwise - tighten
counter clockwise - loosen.
counter clockwise - loosen.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO

well here is the start of me shortening the antennae. everything went well at first then thing came right off the car no issues and then was able to cut it with a pair of bolt cutter sand also grind it down to fit the ball. then when i went to pull the ball off thats when everything about this came crashing down. the ball from the original length is not coming off. i have tried many different ways and still nothing. ill be heading to the junkyard Friday to find another antennae and will be trying again to get the ball with that one.
Everything burns if the flame is hot enough, The world is nothing but a crucible.
Official "I'm gonna drive my Neon until it dies" Club Member #103
Official "I'm gonna drive my Neon until it dies" Club Member #103
- orangeneon05
- 2GN Member
- Posts: 606
- Joined: Mon Feb 23, 2009 12:44 pm
- Location: TOLEDO
i just took my antenna completely off and put in an ipod jack.
there's no need for a radio because the only good station i
actually get plays justin beaver all day... all the other channels
were either talk shows, church related stuff, or just in spanish..
mine twisted right off with the force of my finger tips. i was
honestly quite surprised at how easily it came off.
lefty loosey! "
probably the only thing i can remember from my one week
experience in boy scouts. i soon realized that i was surrounded
by a bunch of tree hugging gospel singers so i bailed as soon as
i could..
there's no need for a radio because the only good station i
actually get plays justin beaver all day... all the other channels
were either talk shows, church related stuff, or just in spanish..
mine twisted right off with the force of my finger tips. i was
honestly quite surprised at how easily it came off.
"righty tightyracer12306 wrote:Clockwise - tighten
counter clockwise - loosen.
lefty loosey! "
probably the only thing i can remember from my one week
experience in boy scouts. i soon realized that i was surrounded
by a bunch of tree hugging gospel singers so i bailed as soon as
i could..


