Rear sway bar bolts Size??

Have some questions about how to achive better handling and stopping power using different springs, upgrading to coilovers, questions on swaybars, bushings, different rotors, pads, ect... Having any steering problems or questions about steering racks, tie rods, tie rod ends, ect... ask these questions here.
Post Reply
Caraudioholic24
2GN Member
Posts: 4135
Joined: Sat Mar 22, 2008 1:56 am
Location: Cumberland R.I.

Rear sway bar bolts Size??

Post by Caraudioholic24 » Fri Mar 06, 2009 11:31 am

Hey everyone. I picked up a set of brackets for the rear sway bar from the boneyard and was unable to salvage any bolts for them. Anyone know what size thread they were or even a part #. Also I need the size and/or part number for the fronts as Im sure they will break off as well when I try to replace my front one. Thanks for any help.


Also I found about four sets of the rear brackets. Would anyone be interested. I need to make it worth my while to go and bust my knuckles to get em off. (or if anyone needs any small parts we can talk as well) I can also have them blasted and primered and painted black. Let me know whos interested. Thanks
Image

Donkeypuncher
2GN Member
Posts: 2183
Joined: Wed Mar 12, 2008 6:14 am
Location: Dallas, Tx

Post by Donkeypuncher » Fri Mar 06, 2009 11:42 am

Damn I forgot what the exact size was. You technically only need 3 because the bracket shares a bolt with the fuel regulator bracket. I just pulled that one out and went to the hardware store to match them up. I'm sure somebody will chime in with the exact dimensions.

Caraudioholic24
2GN Member
Posts: 4135
Joined: Sat Mar 22, 2008 1:56 am
Location: Cumberland R.I.

Post by Caraudioholic24 » Fri Mar 06, 2009 11:44 am

Thanks and the fronts are they any different.

Also the endlinks at the yard were in bad shape. I may be getting a srt-4 rear sway soon so where can I get a nice set of endlinks (i have the strut perch since I changed to tokicos).

Lastly will the sway bar setups from modern come with new endlinks. Just curious in case this sway bar falls through. Thanks
Image

Donkeypuncher
2GN Member
Posts: 2183
Joined: Wed Mar 12, 2008 6:14 am
Location: Dallas, Tx

Post by Donkeypuncher » Fri Mar 06, 2009 7:18 pm

I think the fronts are the same, but you might want to pull one to compare just in case.

All the swaybars from modern come with endlinks, bushings, brackets, and bolts. All you need is the mounting tab, which you already have with tokicos.

Not sure where to find stock endlinks, luckily the guy I bought my srt bar from included them.

EDIT: If you can, try to get a bigger bar than the srt. It's better than not having one, but it's still a pretty small bar.

occasional demons
Junior Admin
Posts: 20067
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Fri Mar 06, 2009 10:40 pm

6505622AA $1.65

Front suspension - Stabilizer bar and components - Stabilizer bar - Bolt
Bolt Back 2001 - 2002


That route didn't help either. I think it is an 8mm but IDK on the pitch.
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap

Caraudioholic24
2GN Member
Posts: 4135
Joined: Sat Mar 22, 2008 1:56 am
Location: Cumberland R.I.

Post by Caraudioholic24 » Tue Mar 10, 2009 1:03 am

Bump
Image

Post Reply

Return to “Suspension, Steering & Brakes”