WTF man...

Want to show off you latest pictures that you took of your Neon or want to share a unique picture you found on the internet. Post them all here to share. Off-Topic Pictures (non-2GN related) should be placed in the Off-Topic Media board.
User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

WTF man...

Post by TheRandom1 » Fri Mar 06, 2009 1:51 pm

I just do not have good luck with the damn lip kit here... the first front lip fell off, the sides won't stay on, the rear is pulling away...


And now this:


Image
Image


I am getting close to giving up and starting over with something else!
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

hybrid-Srt2001
2GN Member
Posts: 2759
Joined: Mon May 28, 2007 6:06 am
Location: reno/cali
Contact:

Post by hybrid-Srt2001 » Fri Mar 06, 2009 2:10 pm

you fail :ban:
ImageImage
[/quote]Yup it definately needs to go lower. If its not scrapeing constantly why you are driving then its not low enough bro. :lol:[/quote]

GreeNeons03
2GN Member
Posts: 1335
Joined: Sat Mar 15, 2008 8:31 pm
Location: Tampa, FL

Post by GreeNeons03 » Fri Mar 06, 2009 2:28 pm

What is that? Take a picture further away for reference.
Image
LilSparkPlug wrote:Polish her....females like that better than slathering! Yeah...I went there.
CLICK ME!
Official "Drive My Neon till it Dies" Club Member #8

User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

Post by TheRandom1 » Fri Mar 06, 2009 2:31 pm

That is the front lip kit piece on the front bumper.
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

GreeNeons03
2GN Member
Posts: 1335
Joined: Sat Mar 15, 2008 8:31 pm
Location: Tampa, FL

Post by GreeNeons03 » Fri Mar 06, 2009 2:36 pm

Did it separate or break off? I can't tell a damn thing with that picture. :lol:
Image
LilSparkPlug wrote:Polish her....females like that better than slathering! Yeah...I went there.
CLICK ME!
Official "Drive My Neon till it Dies" Club Member #8

User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

Post by TheRandom1 » Fri Mar 06, 2009 2:58 pm

You should open your eyes then... :lol: it's the rib in the middle of the lip that cracked, and ripped paint off the bumper.
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

User avatar
JeremyJ
2GN Member
Posts: 1082
Joined: Wed May 12, 2004 2:03 am
Location: Kent, Washington

Post by JeremyJ » Fri Mar 06, 2009 3:11 pm

Maybe you should be more careful pulling in and out of driveways and/or stop hitting shit.
02 base -> 05 SRT ACR -> 96 sedan -> 99 R/T coupe -> 02 R/T -> 03 SRT

Image

User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

Post by TheRandom1 » Fri Mar 06, 2009 3:18 pm

Well, that's no fun!
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

User avatar
03sxt
Former Jr. Admin
Posts: 11389
Joined: Wed May 11, 2005 10:53 am
Location: Conneaut, Ohio
Contact:

Post by 03sxt » Fri Mar 06, 2009 4:13 pm

Yeah, Mopar's paint work is like Maaco on those lip kits. Mine was peeling before I even installed it. :roll:

User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

Post by TheRandom1 » Fri Mar 06, 2009 4:24 pm

It's not the lip that has the paint peeling (up front) it's the A/M bumper the body shop put on...
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

User avatar
03sxt
Former Jr. Admin
Posts: 11389
Joined: Wed May 11, 2005 10:53 am
Location: Conneaut, Ohio
Contact:

Post by 03sxt » Fri Mar 06, 2009 4:25 pm

TheRandom1 wrote:It's not the lip that has the paint peeling (up front) it's the A/M bumper the body shop put on...
For now. :lol:

Now that your little nubby is cracked on the lip, she'll start peeling. ;)

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9501
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Fri Mar 06, 2009 7:44 pm

Why are your sideskirts falling off? Did you not install the plastic hooks that your are supposed to? Mine are very secure.
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

Tam
2GN Member
Posts: 3090
Joined: Wed Jul 09, 2008 2:41 am
Location: New Orleans, Louisiana

Post by Tam » Fri Mar 06, 2009 7:52 pm

I can recall somewhere that you said you used double stick tape for your side skirts, and you didn't drill at all....go figure. lol

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Fri Mar 06, 2009 7:56 pm

You knew that body shop was ghetto as all hell, they did some poor ass prep work if it's cracking like that. Still sucks that it happened though.

hybrid-Srt2001
2GN Member
Posts: 2759
Joined: Mon May 28, 2007 6:06 am
Location: reno/cali
Contact:

Post by hybrid-Srt2001 » Fri Mar 06, 2009 8:51 pm

super glue and touch up paint ftw.
ImageImage
[/quote]Yup it definately needs to go lower. If its not scrapeing constantly why you are driving then its not low enough bro. :lol:[/quote]

User avatar
kornholio788
2GN Member
Posts: 1296
Joined: Sun Jan 08, 2006 11:08 pm
Location: Racine, WI
Contact:

Post by kornholio788 » Fri Mar 06, 2009 9:21 pm

If it is falling off that means you didn't install it correctly noob lol.


Does your husband work on cars too?
2000 Dodge Neon................FULLY BAGGED AND LAID OUT!!...................All Show
Image
theTeejmiester wrote:haha it needs a six foot wing and color change paint and neons to be your style :shock: ...

hybrid-Srt2001
2GN Member
Posts: 2759
Joined: Mon May 28, 2007 6:06 am
Location: reno/cali
Contact:

Post by hybrid-Srt2001 » Fri Mar 06, 2009 9:53 pm

:owned:
ImageImage
[/quote]Yup it definately needs to go lower. If its not scrapeing constantly why you are driving then its not low enough bro. :lol:[/quote]

NickKo
2009 Gold Contributor
Posts: 2248
Joined: Sun Jun 11, 2006 11:24 am
Location: IL./WI.border

Post by NickKo » Fri Mar 06, 2009 10:44 pm

hybrid-Srt2001 wrote:you fail :ban:
:lol:


Nice. :lol:

- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm

Official "I'm Going to Drive My Neon till it Dies" Club #000009

Paul56
2GN Member
Posts: 978
Joined: Sun Sep 09, 2007 1:11 pm
Location: Texas

Post by Paul56 » Sat Mar 07, 2009 8:34 am

Time to get out the DUCT TAPE before declaring total failure. :rofl:
2011 Honda Fit Sport

User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

Post by TheRandom1 » Sat Mar 07, 2009 1:05 pm

Mat666 wrote:I can recall somewhere that you said you used double stick tape for your side skirts, and you didn't drill at all....go figure. lol
Originally that's how I did it, yes. Then I went back and redid the passenger side correctly when it fell off, and had the body shop redo the drivers side. Perhaps they didn't do it right, but there ARE screws in the bottom at least...
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

supertrick_05
2GN Member
Posts: 4225
Joined: Thu Jul 21, 2005 9:09 pm
Location: Duluth, MN
Contact:

Post by supertrick_05 » Sat Mar 07, 2009 2:56 pm

Wow...nice mod!
-Brodie
Image
2002 Dodge Neon ACR - Needs LOTS of love, but I'm gonna slowly get her to where she deserves to be :)

User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

Post by TheRandom1 » Sat Mar 07, 2009 4:23 pm

Upon further review last night.. the rib on the passenger side is busted too.
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

Paul56
2GN Member
Posts: 978
Joined: Sun Sep 09, 2007 1:11 pm
Location: Texas

Post by Paul56 » Sat Mar 07, 2009 5:15 pm

A mod AND driving failure too. :rofl:

I see scrapes along the bottom... gotta stop hitting those curbs.

Hitting curbs = cracked 'n peeling front ends
2011 Honda Fit Sport

User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

Post by TheRandom1 » Sat Mar 07, 2009 5:50 pm

That isn't from hitting curbs actually. My car sits low and it's very hard to not get out of some parking lots without scraping a bit.
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

neon2ner
2GN Member
Posts: 689
Joined: Fri Jan 12, 2007 10:24 am
Location: Halifax, NS

Post by neon2ner » Sat Mar 07, 2009 7:25 pm

go at it on an angle. you just have to get used to it, thats the way it is. i have to do that with my stock bumper, mind you the 02 r/t bumper is pretty low (but i'm putting lip on it soon so it'll be even lower), and i'm lowered on s-techs, but i almost never scrape, because i pay attention to what i'm doing. i would suggest you do the same.
Image
Scott Woodworth
2004 SRT-4
Halifax, Nova Scotia, Canada

User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

Post by TheRandom1 » Sat Mar 07, 2009 7:31 pm

I've had a lowered car for 4 years now, i know how to drive it, lol... some of the parking lots around here are so steep that even with an angle, it still happens!
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

neon2ner
2GN Member
Posts: 689
Joined: Fri Jan 12, 2007 10:24 am
Location: Halifax, NS

Post by neon2ner » Sat Mar 07, 2009 7:38 pm

yes, it does still happen.

guess you gotta be EXTRA careful having the mopar lip kit, plus being lowered. or, just don't go into those select parking lots, extreme, but may be necessity if you don't want to keep breaking lips.
Image
Scott Woodworth
2004 SRT-4
Halifax, Nova Scotia, Canada

User avatar
03sxt
Former Jr. Admin
Posts: 11389
Joined: Wed May 11, 2005 10:53 am
Location: Conneaut, Ohio
Contact:

Post by 03sxt » Sat Mar 07, 2009 7:44 pm

neon2ner wrote:yes, it does still happen.

guess you gotta be EXTRA careful having the mopar lip kit, plus being lowered. or, just don't go into those select parking lots, extreme, but may be necessity if you don't want to keep breaking lips.
After I installed my lip kit, I had to resort to going in to the bank every time I went as opposed to the drive thru, because the angle of the driveway leaving would have completely obliterated the front lip. I actually rubbed a bit leaving before I had the front lip on - I could only imagine what it would do now. :shock: Sucks, but oh well I guess. :lol:

User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

Post by TheRandom1 » Sat Mar 07, 2009 7:54 pm

neon2ner wrote:yes, it does still happen.

guess you gotta be EXTRA careful having the mopar lip kit, plus being lowered. or, just don't go into those select parking lots, extreme, but may be necessity if you don't want to keep breaking lips.
I refuse to go without my Dunkin Donuts coffee every morning... that is the only way I can tolerate 10 hours of work!
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

User avatar
01rtgurl
2GN Member
Posts: 2069
Joined: Sat Jul 17, 2004 1:12 pm
Location: Akron, OH

Post by 01rtgurl » Sat Mar 07, 2009 9:43 pm

TheRandom1 wrote:I've had a lowered car for 4 years now, i know how to drive it, lol... some of the parking lots around here are so steep that even with an angle, it still happens!
either a. dont go there or b. hit the entrance parallel to the road. most extreme jdm tyte angle :rofl:

my daily in the summer:
Image
I have WAY more issues with my frame rails scraping shit than my front lip. angleangleangle!
Image
fusion210: Everytime I ride in a car you're driving I try to make it the last time. D:

Post Reply

Return to “Picture Post”