i know its been asked a million times, but...

Have a question that your not sure what category it fits into or isn't really a specific question about a specific part? Ask it here...
Post Reply
User avatar
fearingdark
2GN Member
Posts: 445
Joined: Sat Jun 10, 2006 7:15 pm
Location: SoCal

i know its been asked a million times, but...

Post by fearingdark » Sun May 03, 2009 1:05 am

would something like this actually work out well?

http://inlandempire.craigslist.org/pts/1151598202.html

thanks for the help...
Image

User avatar
Swordfish2Cowboy
2009 Silver Contributor
Posts: 2693
Joined: Sat Aug 25, 2007 7:06 am
Location: Sandusky, Ohio

Post by Swordfish2Cowboy » Sun May 03, 2009 2:12 am

Uh....
ImageImage
:mopar: :runaway:

DoubtedNeon
2GN Member
Posts: 1483
Joined: Mon Jun 16, 2008 5:28 pm
Location: Larsen, Wisconsin, 54947

Post by DoubtedNeon » Sun May 03, 2009 9:40 am

woah... never EVER seen one of those b4... estienmier...HELP!
Image
Swordfish2Cowboy wrote:They left a pry bar? Well get the prints like they do on CSI, and track those fuckers down. Then cap them.
grindpunk16 wrote: You and about 2 dozen other folks want that cover. It came with the car, and it's all mine.. :twisted: :bootyshake: \:D/

User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

Post by TheRandom1 » Sun May 03, 2009 9:59 am

Check out BlackRoseRacing's progress log. He's making a supercharger fit on his Neon.

It's possible, but you pretty much have to make the mounting plates and everything else yourself.
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

User avatar
fearingdark
2GN Member
Posts: 445
Joined: Sat Jun 10, 2006 7:15 pm
Location: SoCal

Post by fearingdark » Sun May 03, 2009 2:21 pm

F that. i'll just look for an srt motor. me + fabricating = EPIC FAILURE
Image

User avatar
TheRandom1
2GN Veteran
Posts: 9938
Joined: Mon Jan 02, 2006 11:17 pm
Location: Chicagoland

Post by TheRandom1 » Sun May 03, 2009 2:22 pm

Probably a good idea then...
Image
Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.

Mopar_Korean
2GN Member
Posts: 523
Joined: Tue Feb 12, 2008 3:58 pm
Location: Motor City

Post by Mopar_Korean » Sun May 03, 2009 2:30 pm

fearingdark wrote:F that. i'll just look for an srt motor. me + fabricating = EPIC FAILURE
This wouldn't require much fabricating. Per the info on the CL post its for the PT cruisers. Im assuming it for the 2.4L engines. So you would have to do a 2.4 swap or at least a DOHC swap. The biggest issues would be wiring and engine management. Both of which would have to be dealt with with a SRT swap. The only real fab would be the pipes as the PT's use a different style intake mani.
Image
Imported From Detroit
2001 Dodge Neon
1994 Jeep Grand Cherokee

NickKo
2009 Gold Contributor
Posts: 2248
Joined: Sun Jun 11, 2006 11:24 am
Location: IL./WI.border

Post by NickKo » Sun May 03, 2009 2:45 pm

Here is what little I know.
The big problem with installing a supercharger on a Neon, (besides Fabrication), would be fitment.

Somebody did this on Neons.Org. I think the project log / thread is still there.
EDIT: I found it: http://forums.neons.org/viewtopic.php?f=51&t=254466

There are only a handful (counting on one hand) of people that I know of, who have done this successfully.

I did a quick Google search, for yokes and screams.
HERE is what I found.....
http://www.cardomain.com/ride/2669655

Interesting.....

- Nick
Last edited by NickKo on Mon May 04, 2009 12:19 am, edited 1 time in total.
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm

Official "I'm Going to Drive My Neon till it Dies" Club #000009

Ntyvirus1
2009 Silver Contributor
Posts: 2103
Joined: Tue Mar 25, 2008 4:30 pm
Location: Orlando, FL

Post by Ntyvirus1 » Sun May 03, 2009 3:04 pm

thats the one successful supercharged neon and its a first gen (more engine bay space if i remember correctly) BRR is workin on gettin the kit mentioned to work but thers very little if any help since it hasnt been done before.
Official "I'm Going to Drive My Neon till it Dies" Club #000038

Image
hul kogan wrote: And from thy shadows he comes to rippeth thine buttholes. :lol
MoxHair wrote:You should never throw parts at a car.. You'll dent the exterior.

User avatar
lilnicko11
2011 Silver Contributor
Posts: 2473
Joined: Sat Sep 13, 2008 8:40 am
Location: Upstate NY

Post by lilnicko11 » Sun May 03, 2009 9:30 pm

weird
2002 NEON ACR
2004 NEON SRT4
Image
Official "I'm Going to Drive My Neon till it Dies" Club Member #50

LINK:
CARLISLE 2010 VIDEOS

Post Reply

Return to “General 2nd Gen Discussion”