srt motor mounts

OhNoA2.0 · Post by **OhNoA2.0** » Fri Jun 12, 2009 8:10 am

Just wondering if all of the srt4 motor mounts will work on my sxt. i found a killer deal on some bwoodys. *upper, lower, and trans* and i just wanna make sure all 3 will fit b4 i buy. also. what do you guys think about bwoody?

Post by **Diablo0** » Fri Jun 12, 2009 8:36 am

The upper and lower will work, the tranny will not as it's completely different.

I have the BWoody... so far no problems.

OhNoA2.0 · Post by **OhNoA2.0** » Fri Jun 12, 2009 8:37 am

do you know of any places to get a solid tranny mount for mine?

Post by **Diablo0** » Fri Jun 12, 2009 9:24 am

http://www.deyemeracing.com/

Post by **Canada** » Fri Jun 12, 2009 12:22 pm

...out of business I believe Jason.

Post by **Diablo0** » Fri Jun 12, 2009 12:25 pm

Well darn... I had not need or heard of this news.

I see that his online ordering has been taken down...

Well then...

OhNoA2.0 · Post by **OhNoA2.0** » Fri Jun 12, 2009 1:43 pm

that sucks. any other places you guys would know of for a solid tranny mount?

Post by **jonnymopar** » Fri Jun 12, 2009 2:22 pm

Try the Polybushings inserts if you can't find a solid one. It's a hell of a lot cheaper doing it this way.

http://www.polybushings.com/pages/1002.html

randomZERO · Post by **randomZERO** » Fri Jun 12, 2009 5:07 pm

if you can find a wrecked manual at a yard take it off there and fill it then swap. That's my plan.

slaw · Post by **slaw** » Fri Jun 12, 2009 7:23 pm

doesnt modern performance sell the mounts as well?

Donkeypuncher · Post by **Donkeypuncher** » Fri Jun 12, 2009 9:19 pm

I believe modern only sells the torque strut inserts.

Whey does polybushing list the trans insert "including srt" if the 2 are different?

randomZERO · Post by **randomZERO** » Fri Jun 12, 2009 9:35 pm

there different trust me I tryed to use the bwoody trans mount on mine but they are snapped differently.

Donkeypuncher · Post by **Donkeypuncher** » Fri Jun 12, 2009 9:53 pm

Interesting. Is it possible that the actual rubber inside the srt mount is the same shape as ours, and it's just the mounting that's different? That might explain it if that polyurethane insert does fit the srt.

I'm not sure if that's the site I got my trans mount insert from, but it looked identical.

sneakers O'toole · Post by **sneakers O'toole** » Fri Jun 12, 2009 9:56 pm

Donkeypuncher wrote:Is it possible that the actual rubber inside the srt mount is the same shape as ours, and it's just the mounting that's different?

you are correct sir

Adam G · Post by **Adam G** » Sat Jun 13, 2009 12:05 pm

inserts are probably the same.....just the srt4s use the bigger tranny which in fact would call for a different mount

OhNoA2.0 · Post by **OhNoA2.0** » Sat Jun 13, 2009 1:28 pm

if you can find a wrecked manual at a yard take it off there and fill it then swap. That's my plan.

What is the most solid thing to fill it with? i used a polyurethane kinda stuff before but it was disasterous

Post by **jonnymopar** » Sat Jun 13, 2009 2:18 pm

I used 3M WindowWeld silicone sealant. It dries pretty firm, but driving the car, it doesn't feel like it made a huge difference. I don't know if the polyurethane inserts are any better.

Donkeypuncher · Post by **Donkeypuncher** » Sat Jun 13, 2009 3:34 pm

I believe that delrin resin is the toughest thing you can stick in there, next to a solid piece of metal stock. There was a site that had different stiffness levels of urethane also, but I can't remember off the top of my head.

randomZERO · Post by **randomZERO** » Sat Jun 13, 2009 4:44 pm

Try the inserts. I would do RACE if you have the option of that and street. I was gonna use window weld.

Fuzzyneon · Post by **Fuzzyneon** » Sat Jun 13, 2009 11:19 pm

randomZERO wrote:Try the inserts. I would do RACE if you have the option of that and street. I was gonna use window weld.

its not to shaky you can definitely see the motor moves less if you rev it and with ac on at idle it vibrates quite a bit

randomZERO · Post by **randomZERO** » Sat Jun 13, 2009 11:31 pm

I have agp doggone mounts and they don't shake that much but some complain about everything. If the shaking bothers ya go back to stock. I like feeling my car it tells me if there is a problem and tells me when it's happy. Coilovers, solid mounts, strut bars and sways I'm also doing a full prothane kit and dcr rear control arms. Stiffer the better *that's what she said*

OhNoA2.0 · Post by **OhNoA2.0** » Mon Jun 15, 2009 2:41 pm

that is what she said

BigMac · Post by **BigMac** » Fri Jun 19, 2009 4:18 am

Just FYI there's a guy on neons.org who does nice filled mounts. I got a front mount from him a few weeks ago. Click here.