srtjesse DOHC 2gn:

LilSparkPlug · Post by **LilSparkPlug** » Sun Jun 20, 2010 9:54 am

I like the Porsche color better, it's super sexy. Jesse they don't look like they're sagging at all? Mine were sagging in the middle because when I bought them I didn't have the black plastic "rods" that they slide onto. I picked some up off Isa'kee so I finally got around to doing that yesterday. They sit nice and tight to the body of the car with no play at all.

Speeder · Post by **Speeder** » Sun Jun 20, 2010 11:42 am

OMG it one color looks great side skirts are no go give to me

srtjesse · Post by **srtjesse** » Sun Jun 20, 2010 12:42 pm

lsp: yeah i used the tracks but they still sag a little bit not too much but enough to bother me lol

speeder: yes i know i cant believe it my self lol

srtjesse · Post by **srtjesse** » Sun Jun 20, 2010 8:39 pm

well i got off my lazy but and put the fg avs on the car today but i dont have pictures yet

Speeder · Post by **Speeder** » Sun Jun 20, 2010 10:26 pm

hey get off the lazy a$$ and get pics.......

please?!!!!

Haganracing · Post by **Haganracing** » Mon Jun 21, 2010 1:55 am

I saw pictures

Looks so badass!!

chr1s · Post by **chr1s** » Mon Jun 21, 2010 12:45 pm

as well as i. AVS FTW!!

srtjesse · Post by **srtjesse** » Mon Jun 21, 2010 9:10 pm

oh time for some pictures the car needs to be washed and still havent gotten off my lazy butt to wet sand the car. the wing is riveted down for now because it was warped so it will stay this way for a couple of days until it gets used to its new surroundings lol then im taking it to a friend to get it molded in

smiley · Post by **smiley** » Mon Jun 21, 2010 9:25 pm

Is that just a fiberglass pvo or what?

srtjesse · Post by **srtjesse** » Mon Jun 21, 2010 9:28 pm

yeah its a fiberglass pvo i got it from dante like 5 months ago

smiley · Post by **smiley** » Mon Jun 21, 2010 10:32 pm

Thats cool man

srtjesse · Post by **srtjesse** » Mon Jun 28, 2010 7:48 am

little update i just got done sanding down the pvo and come to my surprise its a carbon fiber pvo which now brings me to believe that its a carbon by design piece and not a fiber glass knock off. should i restore it to original look or spray it to match the flat black since its already in a way messed up

sidepipe87 · Post by **sidepipe87** » Mon Jun 28, 2010 8:12 am

srtjesse wrote:little update i just got done sanding down the pvo and come to my surprise its a carbon fiber pvo which now brings me to believe that its a carbon by design piece and not a fiber glass knock off. should i restore it to original look or spray it to match the flat black since its already in a way messed up

trust me... it's not CBD. I'm shocked you got it to fit, frankly.

I've seen it in person and I know which scammer made it. It's a knock off most definitely.

srtjesse · Post by **srtjesse** » Mon Jun 28, 2010 2:50 pm

oh ok thanks dream crusher lol jk...

the only fitment issue i hadt besides the fact that it was warped is that it goes about 10 mm over the third brake light on the right side but i can just trim it down.

thanks for the info its getting fiber glassed anyways pretty soon and im just going to color match it

sidepipe87 · Post by **sidepipe87** » Mon Jun 28, 2010 2:56 pm

Yeah, it doesn't look too bad. When I saw them in person some of them were AWFUL. This is one of the nicer ones.

srtjesse · Post by **srtjesse** » Mon Jun 28, 2010 6:05 pm

lol i fell better now is this from that group buy on srt forums that everyone got jacked?

sidepipe87 · Post by **sidepipe87** » Mon Jun 28, 2010 6:16 pm

srtjesse wrote:lol i fell better now is this from that group buy on srt forums that everyone got jacked?

No, I don't believe so. It was from a deal on here MANY years back, before my time here. I found out all about it though.

srtjesse · Post by **srtjesse** » Tue Jun 29, 2010 4:33 am

oh ok that sucks man i dont understand why people try to get away with scamming people you know it will always come back to you

neonslg09 · Post by **neonslg09** » Mon Aug 09, 2010 6:27 pm

Bump from the third page because I think you are one of the few [only one i know] to dohc swap your car.

I'll be asking you, a few questions.

srtjesse · Post by **srtjesse** » Mon Aug 09, 2010 10:23 pm

Oh hell yeah dude do it come to the dark side you will love the added power and torque. and i want to know what this set up will do on a atx since i mght be doing this on the wifes atx neon

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Mon Aug 09, 2010 11:58 pm

stock dual cam feels about as fast as my magnum motor. if i had to do it again i would have just done built dual cam head with crower s4's

srtjesse · Post by **srtjesse** » Tue Aug 10, 2010 10:54 pm

yeah and the dohc has so much more potential than the sohc

srtjesse · Post by **srtjesse** » Tue Aug 10, 2010 11:47 pm

whent to az to visit the fam and one of my friends who used to have a neon gave me a manual transmission for free and two axles so i was like score lol...

for the last couple of months i have ben driving 1-2-4-5 my third whent out on the car like 3 months ago so now i can replace it and ill probably sell my old transmission dirt or give it away lol

srtjesse · Post by **srtjesse** » Thu Sep 16, 2010 3:47 am

so i had traded the neon in for a black bmw 330i i had the bmw for a couple days and i got a call from the dealer saying that i needed 8500 more down so i laughed in the guys face and took the neon home. so on my way home i was happy to get him back and i decided that i want go a different route with my car here is the little lis of what i wanna do

before the year ends i wanna do the following.

1. get a SRT-D front bumper.
2. get a 03 and up rear bumper.
3. put my font and rear mopar lip kit on.
4. get a srt hood.
5. get my pvo and trunk molded.
6. get all the body work done on the car.

for next year when i get my tax returns i wanna get the following done

1. get a cbd cf viper style hood.
2. get a cbd cf pvo molded trunk.

i will use the srt hood and molded pvo trunk for the white neon once i et the cbd parts

and hopfully before next year ends i wanna get

1. custom dpe wheels.
2. coilovers.
3. paint the car macadamia metallic.
4. get boost.

if all pans out the way i want this is the game plan for this and next year.

SleepingSpeed · Post by **SleepingSpeed** » Sun Dec 26, 2010 1:26 pm

NICE Build.

I am thinking about doing a DOHC head swap and an glad to see it is not to bad, especially being able to run on the stock computer. I was wondering if you could give a list of the parts you needed off a DOHC engine and how well does it run on the stock computer?

What else is needed besides:
1. DOHC Cylinder head
2. DOHC Exhuast header
3. DOHC intake

srtjesse · Post by **srtjesse** » Thu Dec 30, 2010 2:47 am

you will need everything that is on the dohc head just read my thread i know somewere in here i posted everything you need and need to do to make this work

TSHANK · Post by **TSHANK** » Sun May 08, 2011 2:41 pm

hey i am wanting to do the same thing. i have i think i have everything to do it but kinda looking for a walk thru on it, parts list and any general knowlege that you have??!!?! any help would be greatly appreciated, i have a 00 neon sxt and a 96 dohc head. thanks!

srtjesse · Post by **srtjesse** » Sun May 08, 2011 3:17 pm

just read trough this thread it has everything you will need to make this work

Spaz · Post by **Spaz** » Mon Feb 20, 2012 12:29 am

I know this thread is old but, I wonder how this will work for an ngc lol

srtjesse · Post by **srtjesse** » Mon Feb 20, 2012 12:52 am

It would be better since ngc has higher compression than non ngc

2GN.ORG

srtjesse DOHC 2gn:

what color should i paint my car

List