Interchangable Parts

This is the place to ask questions about your engine components like cams, valves, pistons… just anything that is generally "engine" specific. This also includes questions about exhaust systems such as exhaust manifolds, piping size, mufflers, ect...
Post Reply
neonslg09
2GN Veteran
Posts: 5590
Joined: Wed May 06, 2009 7:17 pm
Location: Fredericksburg, Virginia

Interchangable Parts

Post by neonslg09 » Tue Jun 16, 2009 12:04 pm

anyone can feel free to add but ill start off...

will the srt-4 aftermarket exhausts like the OBX and SP
bolt up to the 2gns?? or is there fabrication involved

chrisrunsi
2GN Member
Posts: 76
Joined: Mon Jun 16, 2008 1:47 pm
Location: Staten Island

Post by chrisrunsi » Tue Jun 16, 2009 12:07 pm

cat back will bolt right up

neonslg09
2GN Veteran
Posts: 5590
Joined: Wed May 06, 2009 7:17 pm
Location: Fredericksburg, Virginia

Post by neonslg09 » Tue Jun 16, 2009 12:09 pm

you sure? because i keep staring at the bend that goes over the chassis. just seems to confuse me :/

chrisrunsi
2GN Member
Posts: 76
Joined: Mon Jun 16, 2008 1:47 pm
Location: Staten Island

Post by chrisrunsi » Tue Jun 16, 2009 12:12 pm

essentially everything except what's in the engine bay is the same/interchangeable between models.

neonslg09
2GN Veteran
Posts: 5590
Joined: Wed May 06, 2009 7:17 pm
Location: Fredericksburg, Virginia

Post by neonslg09 » Tue Jun 16, 2009 12:18 pm

Image


so that would bolt up to my 2gn no problem?

granted me having a downpipe instead of cat.

occasional demons
Junior Admin
Posts: 20067
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Tue Jun 16, 2009 12:33 pm

Should. Once I get my exhaust finished, I'll post pics of the two rear sections. I do have that much. I am currently running the SRT rear section to get me by, ATM. (With one side capped for noise reduction; f*cking obnoxious bitch).

The SRT rear is actually louder than no rear section at all. Two openings twice the noise.
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap

neonslg09
2GN Veteran
Posts: 5590
Joined: Wed May 06, 2009 7:17 pm
Location: Fredericksburg, Virginia

Post by neonslg09 » Tue Jun 16, 2009 12:35 pm

they are extremely loud lol. i just dunno why since its not crazy loud on the srt4 itself.

planning on to finish it soon?? would like to see. :)

User avatar
Swordfish2Cowboy
2009 Silver Contributor
Posts: 2693
Joined: Sat Aug 25, 2007 7:06 am
Location: Sandusky, Ohio

Post by Swordfish2Cowboy » Tue Jun 16, 2009 1:29 pm

neonslg09 wrote:they are extremely loud lol. i just dunno why since its not crazy loud on the srt4 itself.
It's because the SRT-4 has a turbo.
ImageImage
:mopar: :runaway:

occasional demons
Junior Admin
Posts: 20067
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Tue Jun 16, 2009 10:45 pm

neonslg09 wrote: planning on to finish it soon?? would like to see. :)
Depends on the weather tomorrow. Got the parts off tonight, but didn't have a chance to take pics.
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap

FAC3L3SS
2GN Veteran
Posts: 6517
Joined: Thu Apr 12, 2007 8:58 pm
Location: NIN

Post by FAC3L3SS » Tue Jun 16, 2009 10:52 pm

Turbo=Boost=Quieter exhaust.
el. oh. el.

occasional demons
Junior Admin
Posts: 20067
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Wed Jun 17, 2009 7:14 am

FAC3L3SS wrote:Turbo=Boost=Quieter exhaust.

O/T.... Just to clarify, for those that may not know, boost doesn't actually = quieter exhaust. Turbo does yes. I know where you where going tho. SC engines are hella louder than N/A. Go to any drag strip/tractor pulls, and you can tell the difference. :D

Better put, turbo = quieter exhaust, with benefits. :twisted:
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap

User avatar
nicklaneSXT
2GN Member
Posts: 225
Joined: Thu Feb 28, 2008 12:58 am
Location: Lafayette, IN

Post by nicklaneSXT » Fri Jun 19, 2009 2:24 pm

neonslg09 wrote:Image


so that would bolt up to my 2gn no problem?

granted me having a downpipe instead of cat.
i was just looking at this catback, post some vids and pics. i plan on buying this, thanks :D

User avatar
UriahRR
2GN Member
Posts: 2717
Joined: Fri May 29, 2009 6:21 pm
Location: East PA

Post by UriahRR » Sun Jun 21, 2009 9:05 am

Hell yea, love the SRT-4 cat-back. I have mine with a 25" CherryBomb Glasspack instead of the resonators so it sounds REALLY nice. Also, in my opinion, nothing looks nicer than an SRT exhaust.

Image
Image
Image

neonslg09
2GN Veteran
Posts: 5590
Joined: Wed May 06, 2009 7:17 pm
Location: Fredericksburg, Virginia

Post by neonslg09 » Sun Jun 21, 2009 9:29 am

that does look pretty fuckin awesome. now im gonnna HAVE to get the srt exhaust.

maybe :)

Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Post by Passt » Sun Jun 21, 2009 9:34 am

neonslg09 wrote:Image


so that would bolt up to my 2gn no problem?

granted me having a downpipe instead of cat.
They spelled "Warranty" wrong. -.-
Image

neonslg09
2GN Veteran
Posts: 5590
Joined: Wed May 06, 2009 7:17 pm
Location: Fredericksburg, Virginia

Post by neonslg09 » Sun Jun 21, 2009 9:48 am

ahaha good catch there. i wasnt actually lookin it this but using it as more of a reference to an aftermarket srt4 exhaust

User avatar
nicklaneSXT
2GN Member
Posts: 225
Joined: Thu Feb 28, 2008 12:58 am
Location: Lafayette, IN

Post by nicklaneSXT » Tue Jul 14, 2009 6:06 pm

any body buy that after market srt4 exhaust?? got any vids of it???

occasional demons
Junior Admin
Posts: 20067
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Tue Jul 14, 2009 10:27 pm

Sorry, forgot about this thread...

Image

Image

Image

Image

Image

The hangers, bends are all within the same parameters. The only difference is the exit point(s) and lack of a muffler.

Edit: Oh, yeah, the tips have been removed from the SRT section, but you get the idea.
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap

User avatar
Adionik
2GN Member
Posts: 2777
Joined: Mon Apr 02, 2007 1:37 am
Location: S.A

Post by Adionik » Wed Jul 15, 2009 4:04 am

nicklaneSXT wrote:any body buy that after market srt4 exhaust?? got any vids of it???
here

http://www.youtube.com/watch?v=QeBKxocstXI


Turbo=Boost=Quieter exhaust.
Lol...my n/a is a lot quieter than my turbo car.

I actually want to put a really restrictive rear section on my SXT so it'll be quiet. SOOOO tired of the droning. I think i'm going to put the stock muffler back in. Just paint it black :laughing3:
dank(r/t) wrote:you tell 'em altezza light, black headlight cover guy!
you know what's up, it's obvious.
TheRandom1 wrote:Adionik, you're an asshole, we all know this.

User avatar
nicklaneSXT
2GN Member
Posts: 225
Joined: Thu Feb 28, 2008 12:58 am
Location: Lafayette, IN

Post by nicklaneSXT » Mon Jul 27, 2009 10:00 am

i order that catback it will be here on the 30th, ill post a vid and tell u how it went :D

User avatar
nicklaneSXT
2GN Member
Posts: 225
Joined: Thu Feb 28, 2008 12:58 am
Location: Lafayette, IN

Post by nicklaneSXT » Mon Aug 03, 2009 2:27 pm

that ebay exhaust works great sounds great too, it fit the b2 kit tip cut outs perfectly here is a few clips, the clip doesnt do it justice. http://www.youtube.com/watch?v=AgW020rhwtc
http://www.youtube.com/watch?v=CcTIOpdUjkM

Post Reply

Return to “Engine”