back in black!!!!!!!

dtjackten · Post by **dtjackten** » Thu Jul 16, 2009 9:54 am

that is what i was thinking to, clean the back of the car up alot! got rear disk brake setup as well, and trunk carpet, sad but i have spend some money on it yet again, prolly turn into winter project. but ya never know! LOL

sidepipe87 · Post by **sidepipe87** » Thu Jul 16, 2009 11:23 am

Looks good man! We rolled the rear lip on superdan's car. basically you have to cut the lip where the indentation is up to the part where it goes straight across. Then you have to score that straight part pretty deep otherwise the brass inserts will rip right out of the lip when you try to roll it, and that's bad. You have to cut the bumper underneath as well so the lip will roll.

It looks better now since we zip tied it up closer to the body

Danteneon · Post by **Danteneon** » Thu Jul 16, 2009 11:38 am

Overall it looks great! What kind of exhaust are you running? The way the tips angle down reminds me of the way my Camaro muffler set-up used to be

dtjackten · Post by **dtjackten** » Thu Jul 16, 2009 12:25 pm

sidepipe87 wrote:Looks good man!

that is what i am talking about, i love it, i am deffently doing that to the back, that looks so good.

as for my exhaust it was done by a custom exhaust guy, 2.5 turbo back, going into a "full bore" muffler (a flowmaster, just better quality) then the oval stainless tips. prolly going to have to change it alittle when i get the lip kit on? right?? get it looking right in the whole in the back??

nabster33 · Post by **nabster33** » Thu Jul 16, 2009 1:19 pm

Car is looking good. Kinda looks like the new eclipse from the front, very sexy

Danteneon · Post by **Danteneon** » Thu Jul 16, 2009 1:27 pm

dtjackten wrote:as for my exhaust it was done by a custom exhaust guy, 2.5 turbo back, going into a "full bore" muffler (a flowmaster, just better quality) then the oval stainless tips. prolly going to have to change it alittle when i get the lip kit on? right?? get it looking right in the whole in the back??

I had a feeling it was something like that. It sounds pretty simular to what I have...

Depending on the spacing of your tips, it may fit. What is the distance of the tips (outer to outer and center to center)?

dtjackten · Post by **dtjackten** » Thu Jul 16, 2009 4:27 pm

i am honestly not sure off the top of my head what the spacing is, yeah, that is pritty much what my setup looks like, lol. i will have to take a look, anyone know the opening for the mopar lip kit?

sidepipe87 · Post by **sidepipe87** » Fri Jul 17, 2009 10:37 am

Whatever a stock R/T is. The one I posted has an SRT rear section which is why the tips are right next to where the rolled area ends.

dtjackten · Post by **dtjackten** » Fri Jul 17, 2009 10:40 am

ok, thanks, i am going to look into that, any idea if u can roll a rear rt bumper???? hmmmmmmm......

NeonOn19s · Post by **NeonOn19s** » Sun Jul 19, 2009 9:09 pm

DTJ-

Looking good man, and glad that you are on the site now, I rarely hit up Dodge forum anymore, once in awhile. I do, but normally i'm on here. Well, it looks like you finished before me...

yell0w4d00r · Post by **yell0w4d00r** » Mon Jul 20, 2009 2:12 am

dtjackten you should mail me that mopar front lip that your not gonna use... it can be like a little gift for me being a new member on this site??

dtjackten · Post by **dtjackten** » Mon Jul 20, 2009 7:59 am

^ lol, i dont think so, unless u want to pay me!!! lol, thanks nate, and i knew i would win, i beat u and contagious, LOL.

yell0w4d00r · Post by **yell0w4d00r** » Mon Jul 20, 2009 10:14 pm

dtjackten wrote:^ lol, i dont think so, unless u want to pay me!!! lol, thanks nate, and i knew i would win, i beat u and contagious, LOL.

it was worth a try lol

BTW nice ride

dtjackten · Post by **dtjackten** » Tue Jul 21, 2009 10:33 am

^ btw nice booooobbbsss.... lol, still struggling finding a rear bumper.... thinking about keeping the 02 bumper and night shading my tails....... for the time being at least.......

also a few pics of the show i went to a few weeks ago....

yell0w4d00r · Post by **yell0w4d00r** » Tue Jul 21, 2009 3:05 pm

are you looking for an 03 and up rear bumper?

the one off my car has been sitting in the garage for like 5 months

Ill trade ya for the mopar front lip??

lmk

dtjackten · Post by **dtjackten** » Tue Jul 21, 2009 4:41 pm

deal!!! i will pay for shipping for the bumper, u pay for the lip! lol

yell0w4d00r · Post by **yell0w4d00r** » Wed Jul 22, 2009 1:00 pm

^PM sent

sidepipe87 · Post by **sidepipe87** » Wed Jul 22, 2009 1:04 pm

glad you guys worked out a deal!

figure out how you're gonna mount those sideskirts yet?

dtjackten · Post by **dtjackten** » Wed Jul 22, 2009 1:51 pm

^ugh, no, i have a way to drill the wholes, (pritty much messure them out and drill) but the clips are not available from the dealer, (or so they say) so the drivers side front will take alot of work to get to look right.... so i am in need of the clips for them.....

may have to take one off and see if i can find something close.... they need to be painted to, but worst case i may just mold them on the car.... dont really want to do that because i drive the car alot.

TheRandom1 · Post by **TheRandom1** » Wed Jul 22, 2009 1:54 pm

Just glue them on with a panel adhesive or something. That's what I'll be doing to mine soon.

dtjackten · Post by **dtjackten** » Wed Jul 22, 2009 2:11 pm

yeah, that was my other thought as well. instead of drilling wholes that may not line up anyway.... lol and maybe molding them as well, i would just hate to hit a bump (speed bump going into a show) and cracking one of the molds.... ugh.... DD's can be a pain to build sometimes

yell0w4d00r · Post by **yell0w4d00r** » Wed Jul 22, 2009 7:40 pm

i used doubleside tape and drilled both ends of the skirts.

i think i have a few clips somewhere in my garage, i gotta check.

dtjackten · Post by **dtjackten** » Wed Jul 22, 2009 8:43 pm

ok, maybe u can send them to me when u send the bumper!!!