Factory stereo q's

GWing · Post by **GWing** » Sat Jul 18, 2009 11:04 am

hey guys my aftermarket deck decided to call it quites so i decided to go back to factory. Anyways i have a set of subs and i was wondering how to wire them up to the factory system. i heard just wire the r/c/a's into the rear 6/9's but what do i do with the switch wire? also im gettin a "Err" message from the deck itself when i select cd mode also the 4 disk changer lights start to blink. WHY? help pls?

Dylan-00Blue · Post by **Dylan-00Blue** » Sat Jul 18, 2009 1:39 pm

ok you wire your remote turn on for the amp to a switched 12v source ie cigarrette lighter rca's you take from the negative and positive of the rear 6x9s

Caraudioholic24 · Post by **Caraudioholic24** » Sat Jul 18, 2009 3:27 pm

If you get the readio to work you will need to buy a converter box that will hook up to the rear speaker wires and convert them to RCA's. Then you take the rcas to the amp. The rest is basic. Also your gonna have to make sure you have remote power to the "blue" remote wire. I have these boxes if you need one. Pm me and let me know

nineball · Post by **nineball** » Mon Jul 20, 2009 5:07 pm

http://www.parts-express.com/pe/showdet ... er=265-026

you need one of those. connect the wires inline with your rear speakers then the rca end to your sub amp.

as stated you can just connect the amp remote line to the cig lighter since it is only on when the ignition is.

Caraudioholic24 · Post by **Caraudioholic24** » Tue Jul 21, 2009 1:53 am

Yes thats pretty much it. Thanks Nineball.
The ones I have are a little nicer looking only that everything is in a small box and you can adjust the input just in case there is any noise issues.