pcv breather

tamadrumr88 · Post by **tamadrumr88** » Thu Sep 29, 2005 9:33 pm

ive searched but unfortunately have found nothing cornerning this matter

http://forum.2gn.org/viewtopic.php?p=42 ... ther#42306

that was the closet i got but it didnt answer my question

i know its popular to replace the pcv line with a filter.... is it a K&N? what else do i need to convert this? what kind of work is involved?

cgneon · Post by **cgneon** » Thu Sep 29, 2005 10:37 pm

http://cgi.ebay.com/ebaymotors/HI-PERFO ... 9368QQrdZ1

your talkin bout the line from the back of the valve cover goin to the airbox right?,,,

just install the filter on the end of the tube, and tie it back...

edit: saw these for sale at pepboys and advance, cant remember how much.. just used the link for a reference

dblsg · Post by **dblsg** » Fri Sep 30, 2005 8:19 am

the pcv remains in place, just the filter attached to it.

tamadrumr88 · Post by **tamadrumr88** » Fri Sep 30, 2005 2:53 pm

i dont want any tube... ive seen more than enough people just place it directly on the back of the valve cover

05srt4clone · Post by **05srt4clone** » Fri Sep 30, 2005 4:34 pm

You can put it directly to the valve cover, I didn't cuz mine didn't fit over it.

tamadrumr88 · Post by **tamadrumr88** » Fri Sep 30, 2005 8:29 pm

Dimensions:

Width: 50 mm (2")

Height: 65 mm (2.5")

Neck: 12 mm I.D. (Inside Diameter) female inlet

anything else that anyone would suggest?

id like to get a k&n if possible, anyone use one of these?

dvampyrelestat · Post by **dvampyrelestat** » Fri Sep 30, 2005 8:34 pm

aquariuskid2001 wrote: edit: saw these for sale at pepboys and advance, cant remember how much.. just used the link for a reference

I was just there this afternoon....they are $9.99....in the Pep Boys Rice isle.

05srt4clone · Post by **05srt4clone** » Fri Sep 30, 2005 9:40 pm

I have a K&N just hooked up to the tube.

scneonchic · Post by **scneonchic** » Sat Oct 01, 2005 3:01 am

i have one from advanced auto on mine...ive had it on since april of this year, and its been working fine ever sence.

BlackRoseRacing · Post by **BlackRoseRacing** » Mon Oct 03, 2005 6:32 am

use that $10 filter on the back of the valve cover and install this:
http://cgi.ebay.com/ebaymotors/JDM-OIL- ... 4334QQrdZ1
^^^
Install this between your pcv and intake manifold to keep oil from being sucked in....

MrPinkles · Post by **MrPinkles** » Mon Sep 25, 2006 8:02 pm

bringing this back from the dead....

found this on the other .org... it moves the pcv to the back of the valve cover.

has anyone done this??

http://chronoscender.freeservers.com/ne ... onpcv.html

EDIT:

nevermind... should of waited to post after i read the whole thread.. dont think it worked

BlackRoseRacing · Post by **BlackRoseRacing** » Mon Sep 25, 2006 9:00 pm

Good note for someone to try