What Can I Do...
-
neonslg09
- 2GN Veteran
- Posts: 5590
- Joined: Wed May 06, 2009 7:17 pm
- Location: Fredericksburg, Virginia
What Can I Do...
to my car without spending any money.
give me some ideas because i would like to do some stuff without necessarily spending anything. throw out any ideas.
give me some ideas because i would like to do some stuff without necessarily spending anything. throw out any ideas.
- bone-yard-racing
- 2GN Member
- Posts: 2328
- Joined: Fri Dec 15, 2006 9:36 pm
- Location: York PA
- Contact:
- hansken_yo
- 2GN Veteran
- Posts: 5148
- Joined: Wed Oct 11, 2006 10:54 am
- Location: Washington
wash and wax it 

| - John || Project Log || Official I'm Going To Drive My Neon Till It Dies Club #000001 |
Everyone knows that for breasts to be "perfect" they need to be within reach.
About the only thing you can do that truly will not cost anything is to remove parts.
Painting defeats the purpose of weight reduction. Removing all paint and covering the sheet metal with very thin oil film to keep the corrosion at bay might reduce the weight... but then you need to factor in the weight of the oil film.
Oh wait... check your tire pressure. Air is free.
Check all fluid levels... also free. Topping up is another matter that may cost.
You cannot take pictures without first washing 'n waxing it... and that will cost.
Your options:
-remove parts
-check fluids and tire pressure
Painting defeats the purpose of weight reduction. Removing all paint and covering the sheet metal with very thin oil film to keep the corrosion at bay might reduce the weight... but then you need to factor in the weight of the oil film.
Oh wait... check your tire pressure. Air is free.
Check all fluid levels... also free. Topping up is another matter that may cost.
You cannot take pictures without first washing 'n waxing it... and that will cost.
Your options:
-remove parts
-check fluids and tire pressure
2011 Honda Fit Sport
- Swordfish2Cowboy
- 2009 Silver Contributor
- Posts: 2693
- Joined: Sat Aug 25, 2007 7:06 am
- Location: Sandusky, Ohio
Haha... you guys have no sense of humor!Swordfish2Cowboy wrote:Paul56 wrote:Painting defeats the purpose of weight reduction. Removing all paint and covering the sheet metal with very thin oil film to keep the corrosion at bay might reduce the weight... but then you need to factor in the weight of the oil film.
2011 Honda Fit Sport
Cool!neonslg09 wrote:lol already have a caiexcon wrote:remove the resonator. It's the big black squirrely looking thing located underneath the airbox.
Sell the resonator to get some cash for mods.
Unfortunately, I don't think anyone on the board will want it.
Hmm, maybe a local junk yard would exchange the resonator for some other parts?
2011 Honda Fit Sport
- hansken_yo
- 2GN Veteran
- Posts: 5148
- Joined: Wed Oct 11, 2006 10:54 am
- Location: Washington
my recycle bin really wanted the old air box 

| - John || Project Log || Official I'm Going To Drive My Neon Till It Dies Club #000001 |
Everyone knows that for breasts to be "perfect" they need to be within reach.
-
SOKADAO954
- 2009 Gold Contributor
- Posts: 1768
- Joined: Wed Oct 29, 2008 11:58 pm
- Location: IM IN MIAMI BITCHHH......
- Contact:
You will need a custom belt to run ONLY the AC and not the PS since they both run off the same belt.neonslg09 wrote:need ac! lol
and hmmm, tempting to remove powersteering...
point me the way on how to do it
It's rather easy, Remove belt, drain steering rack after removing lines(keep some oil inside to reduce corrosion) then loop lines so there is no restrictions.
The better, and more complicated way to do it (And while keeping it filled with oil) is to rip the rack out, and remove the metal sleeves inside the the oil runs freely, and not through any lines.
After you do either, you can remove the PS pump and extra lines if you so desire.
As for running the AC, you need a custom sized belt, and maybe a way to tension the belt...I seen a link on some other forum (dodgeforum) if I remember correctly.
Edit: I suppose you could make a tensioner to sit in the same position as the old P/S Pump that way you can tension it, and you don't have to hunt down a special belt.

Hmmm free stuff...
-Wash and detail the car meticulously.
-Play with tire pressures to get better handling.
-Take engine components apart, clean them, and put them back together.
-Paint eyesores, like the not-quite-black rear inner fenders, and any rusty parts (high temp flat black FTW).
-Re-torque EVERY fastener on the car.
-DIY mods (not free, but close).
-Wash and detail the car meticulously.
-Play with tire pressures to get better handling.
-Take engine components apart, clean them, and put them back together.
-Paint eyesores, like the not-quite-black rear inner fenders, and any rusty parts (high temp flat black FTW).
-Re-torque EVERY fastener on the car.
-DIY mods (not free, but close).
-Derek
|Donate to 2gn|Feedback || OB's | GozziFab | All Business |
|Donate to 2gn|Feedback || OB's | GozziFab | All Business |










