Kyle's OB SXT Sts Installed. Bumper/Lip Installed. Inspected

heydockyle · Post by **heydockyle** » Tue Sep 29, 2009 3:46 pm

Is it easy to use, not very messy? And whats it cost.

I'm not going to seal them up yet. Going to wait till I get the money for CCF's to change the halos. I'll seal it up affter that.

heydockyle · Post by **heydockyle** » Wed Sep 30, 2009 12:10 am

The adjustment on them things suck ass. Gotta take them out the car everytime to adjust them.
Scratched the bumper up around them taking them on and off so many times.

As of right now it looks like the low beams kinda sucks. Cutoff don't look bad. It's the little step-up thing. My buddy's gti has a retarded cutoff line that like flies up in the air.

LilSparkPlug · Post by **LilSparkPlug** » Wed Sep 30, 2009 8:40 am

$25 or so for a roll, and it's VERY easy to use

heydockyle · Post by **heydockyle** » Wed Sep 30, 2009 5:35 pm

Here's a quick pic. It was rainy and with my cell so not the best.

LilSparkPlug · Post by **LilSparkPlug** » Wed Sep 30, 2009 9:29 pm

Is your lip kit cracked?

heydockyle · Post by **heydockyle** » Wed Sep 30, 2009 9:42 pm

Bad lol. Hit a curb in the snow and ripped it off. So it's zip-tied all back up. I have another one waiting, just not putting it on till summer.

heydockyle · Post by **heydockyle** » Fri Oct 02, 2009 2:00 pm

HID's came in today. So will try to put them in tonight.

heydockyle · Post by **heydockyle** » Sat Oct 03, 2009 12:55 am

Hid's are in. Them baby's are bright lol. My fogs are staying on with my lows/highs thou. Not sure why that is.

LilSparkPlug · Post by **LilSparkPlug** » Sat Oct 03, 2009 8:39 am

Ouch that hurts

How did you wire the HIDS? That may be why they stay on

heydockyle · Post by **heydockyle** » Sat Oct 03, 2009 9:09 am

I put a diode in so the high's stay on with lows. Diode is going from the high beam wire on my stock harness, to the low beam wire on my relay harness.

But idk why the fogs are staying on too.

LilSparkPlug · Post by **LilSparkPlug** » Sat Oct 03, 2009 9:22 am

Because the lows are still on it doesn't recognize that the highs are on....hence leaving the fogs on too.

The fogs will go off when the circuit for the lows goes off and switches to high. But if the low circuit never goes off completely....the fogs will remain on.

heydockyle · Post by **heydockyle** » Sat Oct 03, 2009 9:32 am

Yea I just realized that. The high beam is sending power to the lows, and the MFS. I'm going to put another diode in to keep it from going to mfs.

I don't think the fogs will be a problem, since they are pulling their power from the relay, but don't want to chance burning this mfs.

heydockyle · Post by **heydockyle** » Sat Oct 03, 2009 10:13 am

Well, I just messed with it and all I have to do is push the switch for the fogs in and they shut off. But theres only one problem with that. I have the fogs and low beams switched. So when first turn my lights on only fogs are on, then I pull out and it turns my lows on.

But what I'm guessing it's doing is killing power to the lows, which kills the fogs. Then the power I have going from the highs, is going to the lows keeping them on.

I think I'll just put a diode in there so I don't have to push the switch in everytime I turn my highs on.

heydockyle · Post by **heydockyle** » Thu Oct 22, 2009 4:28 pm

Some pics of the car at night

LilSparkPlug · Post by **LilSparkPlug** » Fri Oct 23, 2009 10:01 am

Looks awesome!!! Nice work!

NeonOn19s · Post by **NeonOn19s** » Fri Oct 23, 2009 10:10 am

very nice !!!!

heydockyle · Post by **heydockyle** » Fri Oct 23, 2009 4:34 pm

Thanks. Working on getting some ccfl's from srtforums to change the headlight halos. Headlights need sealed up too. Plus I think I'm getting some RDX projectors so I want to see if anyone is making a bracket for them to retrofit. Don't know if they are the same as mdx or not. Want to do it all at once though.

heydockyle · Post by **heydockyle** » Sat Oct 24, 2009 1:48 pm

Stock vs. Kickers lol. 1 lb vs 4. Now I need a weight reduction.

OB Injector Cover

heydockyle · Post by **heydockyle** » Mon Nov 30, 2009 10:43 am

Bought a winter car finally. 98 2dr neon. Always wanted a first gen .

The good:
10k on 3.55 trans
phAntom grip LSD
2k on pt clutch
61k on motor
solid bobble strut and motor mounts.
Short throw
clean interior.

Bad:
broke timing belt
body is a little rough
alot of stuff rigged up

j-king · Post by **j-king** » Mon Nov 30, 2009 2:25 pm

OB Injector Cover

[/quote]

i say paint the lettering to the injector cover

smiley · Post by **smiley** » Mon Nov 30, 2009 3:14 pm

looks good bro, but as j-king said u should defanitely paint the lettering on the injector cover, cant think of an easy way to do yers, but with mine i went over the lettering and the ribs with a silver sharpie, worked great, then cleared it

but anyway cars looking great

heydockyle · Post by **heydockyle** » Mon Nov 30, 2009 6:04 pm

We'll see. Got a bigger project on my hands for now lol.

neonpla · Post by **neonpla** » Mon Nov 30, 2009 6:38 pm

heydockyle wrote:We'll see. Got a bigger project on my hands for now lol.

coupe + roof rack ftw

heydockyle · Post by **heydockyle** » Mon Nov 30, 2009 7:02 pm

neonpla wrote:
coupe + roof rack ftw

Sheet Metal Screws + Roof Rack + Roof = Not win lol

INVUJerry · Post by **INVUJerry** » Mon Nov 30, 2009 8:20 pm

I've seen those wheels on .org. What is it, dohc, sohc, 3.94, 3.55?

heydockyle · Post by **heydockyle** » Mon Nov 30, 2009 9:23 pm

DOHC

Bought a winter car finally. 98 2dr neon. Always wanted a first gen .

The good:
10k on 3.55 trans
phAntom grip LSD
2k on pt clutch
61k on motor
solid bobble strut and motor mounts.
Short throw
clean interior.

Bad:
broke timing belt
body is a little rough
alot of stuff rigged up

LilSparkPlug · Post by **LilSparkPlug** » Tue Dec 01, 2009 9:33 am

Ouch so it needs a good amount of work to get it running again? Will you have it running in time for winter? It doesn't look bad from that shot though....

heydockyle · Post by **heydockyle** » Tue Dec 01, 2009 10:23 am

LilSparkPlug wrote:Ouch so it needs a good amount of work to get it running again? Will you have it running in time for winter? It doesn't look bad from that shot though....

Yea just ordered timing belt and tensioner. If it gets here by weekend it's getting put on Sunday and then we can see if the valves are bent. If they are I'll buy a used head and start the port and polishing lol.

No it's really not bad, I like it lol.

LilSparkPlug · Post by **LilSparkPlug** » Tue Dec 01, 2009 10:42 am

Can a head be had for cheap?

heydockyle · Post by **heydockyle** » Tue Dec 01, 2009 11:20 am

Buddy has one with no cams for 40 bucks. Junkyards around here only want like 50 if you can find one. Just have to get it checked out and line bored to make sure everything is good.

Hopefully the most I'll have in it with head and timing belt stuff is like 300.