Have some questions about how to achive better handling and stopping power using different springs, upgrading to coilovers, questions on swaybars, bushings, different rotors, pads, ect... Having any steering problems or questions about steering racks, tie rods, tie rod ends, ect... ask these questions here.
-
Kezzo123
- 2GN Member
- Posts: 113
- Joined: Sat Aug 01, 2009 12:55 pm
- Location: England, Bolton
Post
by Kezzo123 » Wed Sep 09, 2009 4:44 pm
I need help!
I have a 2002 chrysler neon r/t RHD and the front wheel bearings are shot. Are they the 33mm wide ones or 39mm? plus where the hell apart from the rip-off chrysler dealer do I buy them? TAH
btw im from the UK and would consider importing as-long as they will be the correct ones?
Thanks for your help in advance as im pretty stuck atm!
-
racer12306
- Junior Admin
- Posts: 16015
- Joined: Sun Oct 24, 2004 8:53 pm
- Location: Baltimore, MD
-
Contact:
Post
by racer12306 » Wed Sep 09, 2009 4:55 pm
Check on the door and see what month/year it was built.
There was actually a recent thread about this and it appears that the change was mid year 2002. It should be on the same sticker as the recommended tire pressures.
-
Kezzo123
- 2GN Member
- Posts: 113
- Joined: Sat Aug 01, 2009 12:55 pm
- Location: England, Bolton
Post
by Kezzo123 » Thu Sep 10, 2009 1:25 pm
my date of manufacture is 9-01 im guessing i have the 33mm ones then? correct me if im wrong!
-
Donkeypuncher
- 2GN Member
- Posts: 2183
- Joined: Wed Mar 12, 2008 6:14 am
- Location: Dallas, Tx
Post
by Donkeypuncher » Thu Sep 10, 2009 6:33 pm
I would think a dealer could look it up by your vin number and tell you. Worst case you could buy both and return the unused one.
I got mine from a local auto parts store, not sure what you guys have out there.
-
Kezzo123
- 2GN Member
- Posts: 113
- Joined: Sat Aug 01, 2009 12:55 pm
- Location: England, Bolton
Post
by Kezzo123 » Fri Sep 11, 2009 3:06 am
Well chrysler have gone bump over here. So getting parts is almost impossible now.... I would import aslong i know what i need to import and where from!
thanks for the help
-
occasional demons
- Junior Admin
- Posts: 20064
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Post
by occasional demons » Fri Sep 11, 2009 12:02 pm
PM Danteneon, or Black Rose Racing your VIN, and they might be able to tell you what is in there. Other than taking it apart to measure it. Which is prolly not an option.
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
-
Mopar_Korean
- 2GN Member
- Posts: 523
- Joined: Tue Feb 12, 2008 3:58 pm
- Location: Motor City
Post
by Mopar_Korean » Fri Sep 11, 2009 10:49 pm
you can buy them from Rockauto.com $40 USD each if I remember correctly.
Imported From Detroit
2001 Dodge Neon
1994 Jeep Grand Cherokee
-
gilly02le
- 2GN Member
- Posts: 1423
- Joined: Fri Oct 27, 2006 12:13 am
- Location: Kingston, Ontario, Canada
-
Contact:
Post
by gilly02le » Wed Sep 16, 2009 8:00 am
^What he said. Just have them shipped to you.
New Sig Time.
