Swapped 01 RT.. want ABS back on

intriguing · Post by **intriguing** » Mon Sep 14, 2009 7:32 pm

Need some help, getting an SRT-4 swapped 01 R/T with ABS, the R/T ABS doesn't work because the ABS is different. What do I need to get the SRT-4 ABS working again?

any help would be appreciated and if you have parts I would also be interested.

-KC

thttxboy · Post by **thttxboy** » Mon Sep 14, 2009 8:30 pm

I would think you would need the srt brake master cylinder and abs module, the front brake hardlines the abs sensors at the wheels. Pricey parts unless you bought a donor car. Where are you located I have some of those parts.

intriguing · Post by **intriguing** » Mon Sep 14, 2009 8:42 pm

I'm outside of Detroit Michigan.

I don't have the car yet, but right now it has the stock R/T brakes with the R/T ABS module.

He is including the SRT-4 brakes, calipers and lines, not sure about the ABS module or distributor thing

Mat · Post by **Mat** » Tue Sep 15, 2009 2:54 pm

It's probably the axles. Even on 1st gens, there were 2 different ABS sensor tab counts. I wouldn't be surprised if there was a different number of tabs from T350 axles to T850 axles.

intriguing · Post by **intriguing** » Tue Sep 15, 2009 5:30 pm

it has SRT-4 axles.. and hubs

thttxboy · Post by **thttxboy** » Tue Sep 15, 2009 10:19 pm

we'll I have the brake master cylinder and the abs module with the lines let me know if u need them when you gets the car. you can pm me later if ur interested.

intriguing · Post by **intriguing** » Wed Sep 16, 2009 1:56 pm

thank you sir... appreciate the help

hansken_yo · Post by **hansken_yo** » Thu Sep 17, 2009 2:59 am

thttxboy wrote:we'll I have the brake master cylinder and the abs module with the lines let me know if u need them when you gets the car. you can pm me later if ur interested.

Ditto... just in case you need more than 1

intriguing · Post by **intriguing** » Thu Sep 17, 2009 11:46 pm

just out of curiosity, how much do you want for both of these ABS things?

Mat · Post by **Mat** » Mon Oct 05, 2009 1:31 pm

intriguing wrote:it has SRT-4 axles.. and hubs

Right, but PL2 sensors and ABS module.
Count the little tabs on your old, stock axles and then the tabs on the new, SRT axles. If the count is different, or if the tabs are in a different place, out of sight of the sensor, your ABS will not work.

c2k · Post by **c2k** » Tue Oct 06, 2009 1:49 pm

you only need the abs module.