ok so i bought a system...front componets infinity kappas 6.1 and a kappa sub and a 1200w 5 channel and all the wiring i could want.. so i have no idea what im doing and i dont want to fry 1000 dollars worth of equipment so does anyone know of a good place to be able to show me how to do this? also the prevois owner ran a sub and its wired but the wires are cheap and small and i want to run the bigger wires....but i just need help.... thanks
ashton
what am i going to do?
what am i going to do?
bad01neon wrote: obviously the 10 year old consented, so its ok lol
give yourself time to do the work right and you won't be dissappointed. i'm rebuilding a neon right now, and while i had it appart, i laid down all the wiring. my suggestion is to remove the front kick pannels, the door sill trim (all 4), the pillar trim between your doors (unbolt the seat belts) and pull the rear seat all the way out. this will give you all the access you need to run the wires cleanly and clear of anything that might damage them. take everything appart before you lay a single wire. it's sometimes hard... seems like extra work, but it'll save you time in the long run. run your signal and speaker wires on one side of the car and your power wire on the other. this will help eliminate noise induction. make sure you have GREAT ground on your amp. this will help to eliminate ground noise (alternator whine). the doors are listed in this forum as is the dash removal. if you've never installed a stereo before, recruit the help of someone you trust who has. car projects build great friendships. good luck!
2000 Dodge Neon, affectionately named Lucius, Under Construction. Literally bringing this one back from the dead.