Exhaust Pic Thread..

UriahRR · Post by **UriahRR** » Wed Oct 07, 2009 8:56 am

Haha, listen, I'm far from a ricer, but whatever, say your shit (another dick-measurer).

The only part I really take offense to is the threat that I'm not an enthusiast. Excuse me? Are you fucking kidding? Really? Really? I just have no response for that... if you knew me, trust me, you'd know (like everyone else does) that cars are my life, my passion, the only thing I really do get enthused with. I see where you're coming from, though, it's not like I would put such a loud exhaust on a real car like an A5 or a Z3 (see how I always see everyone's point of view - why can't you?), but dude, it's a fucking Neon. I know what kind of car I have, I'm not trying to impress anyone. Hell, my car is fucking ugly green! I don't think the "load" of my exhaust really matters when I only have 132 hp. Anyway, this is getting off track.

At the end of the day, the only thing I care about is the fact that I truly am a car enthusiast - no matter what you think. Now I'm not watching this thread anymore, fuck this. Thanks for being a dick, as always, dank(r/t). You're a real great guy to deal with

josie590 · Post by **josie590** » Wed Oct 07, 2009 9:29 am

gts

thats a weird set up..
did you have to cut into your bumper for those tips!?
ouchy..

Tam · Post by **Tam** » Wed Oct 07, 2009 12:17 pm

FAC3L3SS wrote:I've had ~ 5 or 6 setups. This is the current and hopefully final one.

$15 eBay can and about $50 worth of welding. The rest of the piping is from the Tsudo eBay exhaust. Sounds mean. Low idle, not a lot when accelerating. Pops on deceleration. Throaty at WOT.

$15 eBay cans UNITE!

MyNeonSaysHi · Post by **MyNeonSaysHi** » Wed Oct 07, 2009 12:33 pm

slowpeon wrote:
MyNeonSaysHi wrote:

Not 100% true my car is extremely loud and I can outrun minivans
ell oh ell. srt owner chimes in.

As for exhaust noise, I honestly do not care unless it sounds like a damn weed wacker or in some SRT cases, a dump truck.
This is what my car sounds like. I will try and get a sound clip up today. I think I'm going deaf from it though.

Yeah I had the Exhaust Depot side exit back in the day. It drove me nuts after a couple months. I did freak out a lot of people with it though.

FAC3L3SS · Post by **FAC3L3SS** » Wed Oct 07, 2009 1:22 pm

Yes! eBay cans FTW!

Post by **racer12306** » Wed Oct 07, 2009 1:45 pm

Guys, chill the hell out. It's not that serious, consider this a warning.

sidepipe87 · Post by **sidepipe87** » Wed Oct 07, 2009 2:53 pm

I currently have the Thermal R&D. Might be selling it for a camaro setup soonish.

GTS · Post by **GTS** » Wed Oct 07, 2009 4:20 pm

josie590 wrote:gts

thats a weird set up..
did you have to cut into your bumper for those tips!?
ouchy..

Yep, measured the RT Cutouts and cut the bumper, then installed the muffler and ran the 2.5" pipes straight out without tips...

Didnt want shiny tips to show them off, just nice tucked away sort of hidden.

Its a Magnaflow 2.5" muffler with 1 in and 2 out... sounds nice and deep but I dont have any video clips.

NGCnoproblem · Post by **NGCnoproblem** » Thu Jul 12, 2012 3:04 am

Bump. Let's get more pics

DetergentCandy · Post by **DetergentCandy** » Thu Jul 12, 2012 4:34 pm

NGCnoproblem · Post by **NGCnoproblem** » Thu Jul 12, 2012 7:01 pm

I think these kinds of threads should b stickied!

supertrick_05 · Post by **supertrick_05** » Thu Jul 12, 2012 11:30 pm

2.5" pipe, MagnaFlow 30" glasspack, 4" stainless tips.

Video

stairmaster3001 · Post by **stairmaster3001** » Mon Jul 16, 2012 10:10 pm

mpx 3 inch duals

mpx single

now borla

and the borla is currently what i have on now. i loved the single exit but it doesnt fit right unless ur slammed to the ground to me.

Post by **occasional demons** » Mon Jul 16, 2012 10:33 pm

NGCnoproblem wrote:I think these kinds of threads should b stickied!

Psh, our screens on our (insert device used to view pics here) are getting sticky enough.

NEON PARABOLA · Post by **NEON PARABOLA** » Tue Jul 17, 2012 1:21 pm

vibrant dual exit black muff

gtownv6 · Post by **gtownv6** » Tue Jul 17, 2012 2:54 pm

Clean ride

NEON PARABOLA · Post by **NEON PARABOLA** » Tue Jul 17, 2012 3:00 pm

Thankyou sir!

2003se559 · Post by **2003se559** » Tue Jul 17, 2012 5:53 pm

Now I am thinking about ditching my srt rear section and going with the single exit fart can lol

NGCnoproblem · Post by **NGCnoproblem** » Tue Jul 17, 2012 6:04 pm

I think I want to do that too. Might just go with a nice tip tho I'm not sure

NEON PARABOLA · Post by **NEON PARABOLA** » Tue Jul 17, 2012 6:07 pm

I have been thinking about doing a srt exhaust or something of the like, but powdercoating it all flat black.

NGCnoproblem · Post by **NGCnoproblem** » Tue Jul 17, 2012 8:27 pm

I just don't like duals because everyone does it on neons

FAC3L3SS · Post by **FAC3L3SS** » Tue Jul 17, 2012 9:53 pm

Well, about 1/2 of them came factory with duals. . .

Also, the shape of the car doesn't allow for "smooth flowing" single exits. Every body kit, Mopar lip, and SRT rear bumpers all have cutouts for duals in them. Symmetry is key here.

NGCnoproblem · Post by **NGCnoproblem** » Tue Jul 17, 2012 9:59 pm

Lol well ya.
I disagree on the symmetry. I think the mopar lip would look good with a single

Chaloops · Post by **Chaloops** » Thu Aug 16, 2012 1:39 pm

MyNeonSaysHi wrote:
i win. :p

Now that's the type of exhaust everyone should have on their car...