shes all but done

mr_mopar_neon · Post by **mr_mopar_neon** » Mon Oct 19, 2009 4:12 pm

just some pics of my neon and my mates mr2. both only just finishd spraying them both still need a good polish.

Haganracing · Post by **Haganracing** » Mon Oct 19, 2009 4:24 pm

Awesome pictures!!!!!!!!!!!

Love your car man!!

Post by **racer12306** » Mon Oct 19, 2009 4:50 pm

OMG is that a lot of pictures.

Passt · Post by **Passt** » Mon Oct 19, 2009 4:59 pm

Nice looking ride

Good job.

RADARsx 2.0 · Post by **RADARsx 2.0** » Mon Oct 19, 2009 5:04 pm

I really like the neons setup. Especially like the black paint on the rear portion of the trunk lid to bled the tinted tails into the car...Good job over all on both cars tho.

mr_mopar_neon · Post by **mr_mopar_neon** » Mon Oct 19, 2009 7:11 pm

thanks guys

Ntyvirus1 · Post by **Ntyvirus1** » Mon Oct 19, 2009 7:22 pm

looks great, what front splitter is that?

slaw · Post by **slaw** » Mon Oct 19, 2009 7:32 pm

looks fucken dope

mr_mopar_neon · Post by **mr_mopar_neon** » Mon Oct 19, 2009 8:00 pm

i just got a big sheet of carbon and cut it to fit saves the bottom of the bumper and makes for nice down force over 100mph

Haganracing · Post by **Haganracing** » Mon Oct 19, 2009 8:00 pm

you have any vids of your car?

sidepipe87 · Post by **sidepipe87** » Mon Oct 19, 2009 8:29 pm

RADARsx 2.0 wrote:I really like the neons setup. Especially like the black paint on the rear portion of the trunk lid to bled the tinted tails into the car...Good job over all on both cars tho.

I think the back of the car looks awesome. Not too sure about that homemade diffuser on the bumper though

trinity_rush2001 · Post by **trinity_rush2001** » Mon Oct 19, 2009 8:29 pm

looks bad ass i still want a rhd neon

sxxxt · Post by **sxxxt** » Mon Oct 19, 2009 8:32 pm

Looks good, but it needs a rear bumper!! And maybe lowering springs

LilSparkPlug · Post by **LilSparkPlug** » Mon Oct 19, 2009 9:08 pm

Looks great!! But your rear bumper needs something to make it "even" with the rest of the car. I love the color though

ragek23 · Post by **ragek23** » Mon Oct 19, 2009 9:20 pm

your car looks freakin awesome!

I would caution you about the harnesses tho. You should have less than a 45degree angle between the seat back and the mounting point of the harness. Have the harness at that point could break your collarbones during an accident.

http://www.takataracingproducts.com/guide.html

MoxHair · Post by **MoxHair** » Mon Oct 19, 2009 9:37 pm

ragek23 wrote:your car looks freakin awesome!

I would caution you about the harnesses tho. You should have less than a 45degree angle between the seat back and the mounting point of the harness. Have the harness at that point could break your collarbones during an accident.

http://www.takataracingproducts.com/guide.html

Thank you for posting this as I was just about to do the same. Those Harnesses are dangerous.

mr_mopar_neon · Post by **mr_mopar_neon** » Tue Oct 20, 2009 4:28 am

sxxxt wrote:Looks good, but it needs a rear bumper!! And maybe lowering springs

as for the rear bumper i did buy one but it just looked bad stuck out from the car on both sides and was so heavy so just smoothed this one in for the time been and made up the diffuser.

o and she is on a 35mm drop i no the pics dont rear show that but on the front she is very low some times to low. thinking about doing a air ride set up next year maybe.

with the harness i would of said looking at that website they are on the right angel???

dodge_girl · Post by **dodge_girl** » Tue Oct 20, 2009 4:30 am

LilSparkPlug wrote:Looks great!! But your rear bumper needs something to make it "even" with the rest of the car. I love the color though

i was thinking the same thing, the back just doesnt look finished, car looks awesome otherwise, lovin the colour!!

mr_mopar_neon · Post by **mr_mopar_neon** » Tue Oct 20, 2009 4:50 am

ha ha you guys really dont like the back end i will end up getting a rear bumper just finding one i like and know will look good, its a lot of money to wast shipping from America not to like it again

LilSparkPlug · Post by **LilSparkPlug** » Tue Oct 20, 2009 9:59 am

I can understand that....you have a valid point. Which bumpers did you have in mind?

NeonOn19s · Post by **NeonOn19s** » Tue Oct 20, 2009 11:49 am

looks great!!!

BTW-

What is the cost of shipping a RHD over to the states...

ragek23 · Post by **ragek23** » Tue Oct 20, 2009 12:01 pm

mr_mopar_neon wrote:
with the harness i would of said looking at that website they are on the right angel???

here is another reference: http://www.schrothracing.com/docs/Schro ... cklist.pdf

I know some people had to make a metal bracket hang below their speaker deck to get the proper Mounting angle. The angle in question is: a parallel line to the ground from the seatback or your shoulders and the ground. Its the 7th item marked in the checklist above. Since you have a 3point i would say a 45degree angle would be fine with your setup.

mr_mopar_neon · Post by **mr_mopar_neon** » Tue Oct 20, 2009 5:20 pm

LilSparkPlug wrote:I can understand that....you have a valid point. Which bumpers did you have in mind?

dont really know iv seen some i like but ant really looked properly after the disaster of the 1st one

LilSparkPlug · Post by **LilSparkPlug** » Tue Oct 20, 2009 6:13 pm

Neonon19s: Around 2k plus port fees and making it to US specs.

What bumper did you have originally that you hated? I wonder if an SRT bumper would work. Or even the rear part of the Mopar lip kit.

mr_mopar_neon · Post by **mr_mopar_neon** » Wed Oct 21, 2009 5:40 am

i do like the lip kits may do somthing like that.

if any one wants a rhd shippinh just let me know if you need a car finding

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Wed Oct 21, 2009 5:56 am

i would be interested in the next year or so.

NeonOn19s · Post by **NeonOn19s** » Wed Oct 21, 2009 12:39 pm

ugh... trying to search in the UK for a neon.. don't have a dam UK postal code.. lol

LowNSlow · Post by **LowNSlow** » Wed Oct 21, 2009 12:55 pm

I liked the mister 2 till the wing

mr_mopar_neon · Post by **mr_mopar_neon** » Wed Oct 21, 2009 7:32 pm

NeonOn19s wrote:ugh... trying to search in the UK for a neon.. don't have a dam UK postal code.. lol

ill give you my shop post code its hu7 3db

and as for the mr2 am the same with the wing way to big just dont sit right on the car

rhys6r4 · Post by **rhys6r4** » Thu Oct 22, 2009 4:05 am

I have a RHD neon for sale, send me a message for full specs!