Driver's door window trim. Help!

Got a question on outside appearance modifications. Questions about body kits, exterior lighting, just anything thats a visual mod on the "exterior" of the car. Ask those questions here.
Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Driver's door window trim. Help!

Post by Passt » Fri Dec 11, 2009 10:15 pm

Hey all,

I asked about this stuff about 6 months ago, and forgot about it for a while. Over the winter I'm trying to get the car back to 100% on the exterior. I need help. This piece on my car is bent, and I need a new one.

Image

Image

It's the driver's door plastic window trim. Towards the back where it meets the rear passenger door, it's bent upward. The dealership will only sell the entire car's trim as a set, I think it was around $160-$200. All I need is that driver's door piece. If anyone would be willing to send me that piece I'll gladly pay a price and shipping of course. I can't find any in decent condition around here. Help me out!
Image

heydockyle
2011 Silver Contributor
Posts: 4829
Joined: Mon Jul 14, 2008 6:09 pm
Location: Uniontown, Pennsylvania

Post by heydockyle » Fri Dec 11, 2009 10:37 pm

Pretty sure The dealership thing is bullshit because I bought one for my drivers door when it was getting fixed. IIRC it was like 45 bucks.
Image
05 OB SRT-4 - AGP Stg 3 Delta 44 Turbo w/ Supporting mods
98 Platinum Coupe - 2.4 Swap
98 Flame Red Sedan - DD Slow
98 Sport Coupe - Totaled
05 SXT - Sold

occasional demons
Junior Admin
Posts: 20067
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Fri Dec 11, 2009 10:46 pm

5008711AF $58.10
Front door - Door and components - Belt w strip
Belt w strip Left 2005

This should be what you want. Since Photobucket is being ghey, I will try to post a pic of the exploded trim view later just to verify the reference number.


Should be item #9
Image
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap

Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Post by Passt » Sat Dec 12, 2009 6:22 am

Thanks for the reference. I don't know what I am thinking of. Perhaps when I tried to describe it to the guy at the dealer, he didn't know what I was talking about and quoted me on the wrong part. Either way, if anyone has an extra one of these around, or knows someone who is parting out a wrecked car or something, I'd be greatly appreciative if you'd send it my way lol.
Image

heydockyle
2011 Silver Contributor
Posts: 4829
Joined: Mon Jul 14, 2008 6:09 pm
Location: Uniontown, Pennsylvania

Post by heydockyle » Sat Dec 12, 2009 8:47 am

Maybe the Pillar Trim? Idk. I don't think I have any laying around, almost positive I don't. But I'll check after work tonight.
Image
05 OB SRT-4 - AGP Stg 3 Delta 44 Turbo w/ Supporting mods
98 Platinum Coupe - 2.4 Swap
98 Flame Red Sedan - DD Slow
98 Sport Coupe - Totaled
05 SXT - Sold

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Sat Dec 12, 2009 9:09 am

That's called a belt molding Nate. I have two extras (one's a front one's a rear) I'm just not sure what side they're from. However...keep this in mind: When you buy a used one it's 100% harder to keep the end of it stuck down like that. They attach with double sided tape and clips into the door itself. I'm pretty sure my front one is a driver's front I'll have to check it out.

For the price IMO you're better off buying new then you're guaranteed it will stick down properly.

Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Post by Passt » Sat Dec 12, 2009 11:52 am

Hmmmmmmm, I'll take that into consideration. I HATE having small things wrong like this. Between that and my fucking headlight gaskets I'm ripping my hair out.
Image

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Sat Dec 12, 2009 1:48 pm

It's just food for thought. They're tough to get to stick, especially when they're used. I went through that with mine. After I bought a new one it did the exact same thing, so I went through the Mopar parts warranty to get another one. For the small price they are you're better off :)

Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Post by Passt » Sat Dec 12, 2009 2:01 pm

Are they bent like that to begin with? The reason I can't get mine to stay down is because the guy who painted my car bent it when he was removing it.
Image

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Sat Dec 12, 2009 5:06 pm

No they're not, they're perfectly straight, but once they're bent you can't bend them back.

Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Post by Passt » Sat Dec 12, 2009 6:07 pm

LilSparkPlug wrote:No they're not, they're perfectly straight, but once they're bent you can't bend them back.
Loud and clear. Maybe I'll add this to my Christmas list.
Image

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Sat Dec 12, 2009 6:59 pm

Do it...tell Santa :D

Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Post by Passt » Sat Dec 12, 2009 11:08 pm

occasional demons wrote:5008711AF $58.10
Front door - Door and components - Belt w strip
Belt w strip Left 2005

This should be what you want. Since Photobucket is being ghey, I will try to post a pic of the exploded trim view later just to verify the reference number.


Should be item #9
Image
Any luck with the larger picture?
Image

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Sun Dec 13, 2009 10:05 am

In this shot number 7:
Image

MSRP 58.10
Price: 40.08
MoparPartsAmerica.com

occasional demons
Junior Admin
Posts: 20067
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Sun Dec 13, 2009 1:02 pm

Yeah, thats a better pic, PN# is the same. The problem with only ordering one part, is the shipping makes it just as cheap to get it local.
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Sun Dec 13, 2009 4:33 pm

Actually they only charged like $10 for Smileytyskates to ship a lip kit. And those boxes are rather large. But if your dealership marks everything up then it may be cheaper.

Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Post by Passt » Fri Dec 25, 2009 3:40 pm

Sweet I'll order it from there LSP. Thanks for the help.
Image

Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Post by Passt » Tue Feb 23, 2010 11:45 am

I ordered this on January 16th 2010. It still hasn't arrived. I checked the order status and it says "processing". They say the part is discontinued / Chrysler has altered it from it's original, and they don't know when they will be available. What the fuck.

Does anyone have alternative recommendations as to where I can pick this up? I'd love to have this fixed by spring.
Image

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Tue Feb 23, 2010 1:02 pm

Part #5008711AG

Back Order
Type......................Orders.....Quantity
Vehicle Off Road........0..............0
Special Handling.......71............71
Daily..........................1..............1
Stock.........................1..............1
Other........................71............71
Total........................144..........144

Supplier Ship Commitment
Supplier In-Transit 0
National In-Process 0
National UCS 0
Facing PDC In-Transit 0
Facing PDC UCS 0
Other PDCs In-Transit 0
Other PDCs UCS 0

The only dealer in the US that shows one in inventory...
ALLEN SAMUELS DODGE CHRYSLER JEEP
KATY TX USA Phone: (281)-675-8549 / (866)-366-6727

Ouch. It has not been discontinued, but the vendor doesn't have any available. Find out if they have your order on Special Handling or not Nate. If it's on a stock or daily order, it won't be released until the special handling orders are filled.
If I could just figure out how to meld the Outback and the Neon into one car...

Image

Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Post by Passt » Tue Feb 23, 2010 1:23 pm

How do I find that out bud? And if it's not on special handling, is there a way to change that?
Image

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Tue Feb 23, 2010 1:54 pm

You will have to call the dealer and ask them what kind of order it is on. If they did not special handle it, they need to change the order to SH. It will put you at the bottom of the SH list though.

And all this is pending if they will ever supply the part!
If I could just figure out how to meld the Outback and the Neon into one car...

Image

Midnight_Rider
2014 Platinum Contributor
Posts: 8457
Joined: Wed Aug 02, 2006 2:49 am
Location: Indianapolis, IN

Post by Midnight_Rider » Tue Feb 23, 2010 2:22 pm

Danteneon wrote:The only dealer in the US that shows one in inventory...
ALLEN SAMUELS DODGE CHRYSLER JEEP
KATY TX USA Phone: (281)-675-8549 / (866)-366-6727
Nate, I would just call this dealer and fork over the shipping charge rather than wait for the special order to be filled or put a used part on your beautiful car. I have ordered from dealers before (my 1GN cup holder foam pads being the most recent "mod" :rofl: I have bought like this) and have had good luck.
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

LilSparkPlug
2GN Veteran
Posts: 12206
Joined: Thu Jan 10, 2008 4:49 pm
Location: RI

Post by LilSparkPlug » Tue Feb 23, 2010 3:11 pm

I think the one I have is the passenger front. Nate I would pull it off.....heat it up and put new double sided tape on it, see if that helps.

Ntyvirus1
2009 Silver Contributor
Posts: 2103
Joined: Tue Mar 25, 2008 4:30 pm
Location: Orlando, FL

Post by Ntyvirus1 » Tue Feb 23, 2010 6:56 pm

damn, bad news for me. Walked out to my car this morning to find my driver side stickin up, it was fine yesterday but i guess it had enough.
Official "I'm Going to Drive My Neon till it Dies" Club #000038

Image
hul kogan wrote: And from thy shadows he comes to rippeth thine buttholes. :lol
MoxHair wrote:You should never throw parts at a car.. You'll dent the exterior.

mikeb818
2GN Member
Posts: 630
Joined: Wed Aug 19, 2009 7:19 pm
Location: SoCal

Post by mikeb818 » Fri Feb 26, 2010 2:18 am

so all of the neons get an EPIC FAIL!!! for all of their exterior trim and weather stripping!!
| 94 BMW 325i Sedan |
| 04 MTX Flame Red SXT |- TOTALLED

User avatar
Alex Kurdian
2GN Member
Posts: 1023
Joined: Mon Jul 23, 2007 2:14 am
Location: Australia

chrome

Post by Alex Kurdian » Fri Feb 26, 2010 5:29 am

wouldn't it be cool if you could get the chrome colored window trim for the neon instead of the plastic?
I drove My Neon till it "SOLD" And then bought a Mazda 3 Skyactiv
Australia 01
"So say We ALL"

Image

mikeb818
2GN Member
Posts: 630
Joined: Wed Aug 19, 2009 7:19 pm
Location: SoCal

Re: chrome

Post by mikeb818 » Fri Feb 26, 2010 2:27 pm

Alex Kurdian wrote:wouldn't it be cool if you could get the chrome colored window trim for the neon instead of the plastic?
no. :beatstick:
haha jk it would be cool. but i like the black.
| 94 BMW 325i Sedan |
| 04 MTX Flame Red SXT |- TOTALLED

Passt
2GN Member
Posts: 2635
Joined: Fri Feb 29, 2008 12:23 pm

Post by Passt » Fri Mar 12, 2010 4:13 pm

Haha yea, I agree, the black is better. Chrome would be too flashy imo since nothing else on the car is chrome.
Image

User avatar
MrAngry
2GN Member
Posts: 286
Joined: Thu Jul 02, 2009 2:30 am

Post by MrAngry » Mon Mar 22, 2010 2:44 pm

SXT front trim is chrome.
Image

Midnight_Rider
2014 Platinum Contributor
Posts: 8457
Joined: Wed Aug 02, 2006 2:49 am
Location: Indianapolis, IN

Post by Midnight_Rider » Mon Mar 22, 2010 2:54 pm

MrAngry wrote:SXT front trim is chrome.
Yes, unfortunately. Sorry, just my opinion. [/hijack]
Official "I'm Going To Drive My Neon 'til It Dies" Club #10

Post Reply

Return to “Exterior”