Some finished engine bay pics more pics

neonslg09 · Post by **neonslg09** » Wed Feb 03, 2010 11:33 am

Definitely in 15's for your car. Should paint the car the same color as your VC.

BlackRT? · Post by **BlackRT?** » Wed Feb 03, 2010 1:06 pm

im leaning towards the 15s since there quite a bit cheaper more tire options as well. Probally run a drag radial all the time on the street. i think it would be too much red

Srtkr · Post by **Srtkr** » Thu Feb 04, 2010 1:42 am

I'd do 15's if ya want a thick radial and coilovers but 16's if you want more looks

BlackRT? · Post by **BlackRT?** » Thu Feb 04, 2010 8:01 am

Srtkr wrote:I'd do 15's if ya want a thick radial and coilovers but 16's if you want more looks

i actually sold my coilovers. cars sitting on koni yellows and mopar xx rate springs. the front is nice but the rear sits to high for my liking so 16s will cover some of the gap. then again i want 16s so i can swap them on my srt 4 when i get it. im so undecided

Srtkr · Post by **Srtkr** » Fri Feb 05, 2010 1:58 am

BlackRT? wrote:
Srtkr wrote:I'd do 15's if ya want a thick radial and coilovers but 16's if you want more looks
i actually sold my coilovers. cars sitting on koni yellows and mopar xx rate springs. the front is nice but the rear sits to high for my liking so 16s will cover some of the gap. then again i want 16s so i can swap them on my srt 4 when i get it. im so undecided

you want a real srt? thats whats up lol my buddy has a red one with just the borla exhaust for 8 and a fully built ams one for 20 with 750 hp lol

BlackRT? · Post by **BlackRT?** » Fri Feb 05, 2010 2:43 am

Srtkr wrote:
BlackRT? wrote:
Srtkr wrote:I'd do 15's if ya want a thick radial and coilovers but 16's if you want more looks
i actually sold my coilovers. cars sitting on koni yellows and mopar xx rate springs. the front is nice but the rear sits to high for my liking so 16s will cover some of the gap. then again i want 16s so i can swap them on my srt 4 when i get it. im so undecided
you want a real srt? thats whats up lol my buddy has a red one with just the borla exhaust for 8 and a fully built ams one for 20 with 750 hp lol

Yeah i want a real one for a daily diver not my race car lol!. Do you need a bottleneck fix return line setup? i have made a few for people and could make you one

BlackRT? · Post by **BlackRT?** » Mon Feb 08, 2010 7:19 am

Pickd up some new slicks/rim setup

darthroush · Post by **darthroush** » Mon Feb 08, 2010 1:38 pm

Your car is great man! Love it! The engine is insane!

BlackRT? · Post by **BlackRT?** » Mon Feb 08, 2010 2:05 pm

got me a new wideband.. aem analog looks pretty dope

Srtkr · Post by **Srtkr** » Thu Feb 11, 2010 1:57 am

BlackRT? wrote: Yeah i want a real one for a daily diver not my race car lol!. Do you need a bottleneck fix return line setup? i have made a few for people and could make you one

i just bought mine from summy, i was wanting to get those slicks but you beat me to it

BlackRT? · Post by **BlackRT?** » Thu Feb 11, 2010 1:18 pm

oh okay cool.. well let me know if you need any help with the car..

Srtkr · Post by **Srtkr** » Fri Feb 12, 2010 12:35 am

BlackRT? wrote:oh okay cool.. well let me know if you need any help with the car..

no doubt will do, im sure ill need something haha

BlackRT? · Post by **BlackRT?** » Mon Feb 22, 2010 10:33 am

one of the mods should move this thread to the project logs...

small update

Fiberglass nrg fixed back seats... damn there extremely light and pretty dope looking

fresh arp extended wheel studs

synviper · Post by **synviper** » Mon Feb 22, 2010 10:48 am

you and eric with the whole light thing lol car looks good, are thoughs kosei w/ slicks from summy (chris).

Srtkr · Post by **Srtkr** » Tue Feb 23, 2010 12:44 am

seats look great! i just got some bride bucket seats too.

BlackRT? · Post by **BlackRT?** » Tue Feb 23, 2010 1:19 pm

Srtkr wrote:seats look great! i just got some bride bucket seats too.

Yeah i wanted the fixed back brides you got but wasson bought these nrg seats and welded up some brackets and relized they didnt fit in the grey car so i worked out a deal with him

Srtkr · Post by **Srtkr** » Wed Feb 24, 2010 12:51 am

BlackRT? wrote:
Srtkr wrote:seats look great! i just got some bride bucket seats too.

Yeah i wanted the fixed back brides you got but wasson bought these nrg seats and welded up some brackets and relized they didnt fit in the grey car so i worked out a deal with him

ya i got mine from brad lol and what is wasson gonna do for seats then?

BlackRT? · Post by **BlackRT?** » Thu Feb 25, 2010 12:07 am

Srtkr wrote:
BlackRT? wrote:
Srtkr wrote:seats look great! i just got some bride bucket seats too.

Yeah i wanted the fixed back brides you got but wasson bought these nrg seats and welded up some brackets and relized they didnt fit in the grey car so i worked out a deal with him
ya i got mine from brad lol and what is wasson gonna do for seats then?

yeah what did you pay for them if you dont mind saying?
he got the pair of stock srt 4 viper seats i was going to buy and ordered acr harness slots

Just ordered a badass steering wheel and sold my stock srt 4 wheel.. I need to figure out what quick disconnect and hub setup i want to get

Srtkr · Post by **Srtkr** » Thu Feb 25, 2010 12:19 am

BlackRT? wrote:
Srtkr wrote:
BlackRT? wrote:
Yeah i wanted the fixed back brides you got but wasson bought these nrg seats and welded up some brackets and relized they didnt fit in the grey car so i worked out a deal with him
ya i got mine from brad lol and what is wasson gonna do for seats then?
yeah what did you pay for them if you dont mind saying?
he got the pair of stock srt 4 viper seats i was going to buy and ordered acr harness slots

Just ordered a badass steering wheel and sold my stock srt 4 wheel.. I need to figure out what quick disconnect and hub setup i want to get

300 for both

he wanted them gone because he got sparcos. Plus they came with sliders and brackets

BlackRT? · Post by **BlackRT?** » Thu Feb 25, 2010 1:43 am

you might as well throw those universal sliders away. If you want to checkout the brackets me and wasson made they came out really nice.. Yeah u got a little deal on them.. they were like 400 or something on ebay

Go to the junkyard and take some stock seat brackets out of a 1gen neon 4door and 2 door are the same. Weld your brackets to the sliders and your good to go

neonslg09 · Post by **neonslg09** » Thu Feb 25, 2010 9:48 am

Dudeeeeee I'm lovin' the car. I want Kosei's so badly

Definitely needs to go to progress log's

BlackRT? · Post by **BlackRT?** » Thu Feb 25, 2010 4:01 pm

neonslg09 wrote:Dudeeeeee I'm lovin' the car. I want Kosei's so badly Definitely needs to go to progress log's

yeah i wish i could find a full set of kosei's in silver for street rims/tires

BlackRT? · Post by **BlackRT?** » Wed Mar 03, 2010 6:19 pm

Got some parts over the last couple days.
Crane 18s

Prothane full suspension bushing kit.. I wanted red but modern sent me black instead i guess damn you

cleaned up my valve cover a little bit