Rare Parts

BlackRoseRacing · Post by **BlackRoseRacing** » Sat Feb 13, 2010 12:15 pm

^^^
Mopar Performance 2 1/2 polished stainless midpipe for 2GN

^^^
Mopar Performance Non-SRT 2GN downpipe
The Mexican turbo setup is boxed at my place........

blackandbluesrt4 · Post by **blackandbluesrt4** » Mon Feb 15, 2010 1:18 am

i bought this a while back then returned it....i wish i kept it.

BlackRoseRacing · Post by **BlackRoseRacing** » Mon Feb 15, 2010 2:33 pm

blackandbluesrt4 wrote:i bought this a while back then returned it....i wish i kept it.

?

Hudson_Neon · Post by **Hudson_Neon** » Mon Feb 15, 2010 3:46 pm

ok, i HEAR these are pretty rare... 2.0L CF valve cover!

Danteneon · Post by **Danteneon** » Mon Feb 15, 2010 3:47 pm

Why yes, yes it is

Hudson_Neon · Post by **Hudson_Neon** » Mon Feb 15, 2010 4:01 pm

it's my emergency rent payment. lol. if for some reason i can't get the money in other ways, that thing is gone. right after my coil overs

FAC3L3SS · Post by **FAC3L3SS** » Mon Feb 15, 2010 5:59 pm

OB wrote:IMO the R/T skirts should be on the rare parts list. The whole Mopar lip kit is rare technically, as it has been discontinued for awhile now. Anything that can only be purchased used can be considered rare if you ask me.

OB's rare parts:

Cupholder light
R/T skirts
Mopar lip
ACR antenna delete plug
Iceman Intake
Injector cover

Mopar lip kits are still available at a few dealerships. I was headed over to order mine this week.

OB · Post by OB » Mon Feb 15, 2010 9:22 pm

True, but they haven't actually manufactured them in years. Thus, the definition of 'discontinued'.

dodgeguy482 · Post by **dodgeguy482** » Mon Feb 15, 2010 10:00 pm

BlackRoseRacing wrote:
^^^
Mopar Performance 2 1/2 polished stainless midpipe for 2GN

^^^
Mopar Performance Non-SRT 2GN downpipe
The Mexican turbo setup is boxed at my place........

I never knew they made a non srt downpipe, or the stainless midsection. Do you have a part number on those and know if more are available? Or are they a secret. I would love to get my hands on one of each. That downpipe looks amazing.

Danteneon · Post by **Danteneon** » Tue Feb 16, 2010 10:42 am

Those parts are about as close to prototype as you can get. The were available from MP for a very brief time and then discontinued.

The closest thing you will see to them is the SRT parts which are not polished.

BlackRoseRacing · Post by **BlackRoseRacing** » Wed Feb 17, 2010 8:28 pm

Danteneon wrote:Those parts are about as close to prototype as you can get. The were available from MP for a very brief time and then discontinued.

The closest thing you will see to them is the SRT parts which are not polished.

He is correct, Chrysler or MoparPerformance will not give me a part number since it was not supposed to be released to the public. After reading a little bit into Mancini Racing's link to Chrysler, it would explain why I was able to identify the polished SS parts they had last year at Carlisle and very few people could identify. It seems Mancini has an insider over at Chrysler and when it came to this downpipe, it was not to be released to the public due to emision regulations and this one of one(to my knowledge and research) is the only Non-SRT polished cat delete to be out there...

1972demon · Post by **1972demon** » Wed Feb 17, 2010 9:31 pm

Hudson_Neon wrote:ok, i HEAR these are pretty rare... 2.0L CF valve cover!

.

Rare , but still available isn't it? My dealership said they could get one a couple months ago but they said it was 804 dolllars

Post by **Canada** » Wed Feb 17, 2010 10:18 pm

BlackRoseRacing wrote: and this one of one(to my knowledge and research) is the only Non-SRT polished cat delete to be out there...

Hudson_Neon · Post by **Hudson_Neon** » Wed Feb 17, 2010 10:55 pm

1972demon wrote:Rare , but still available isn't it? My dealership said they could get one a couple months ago but they said it was 804 dolllars

yeah, they are quite the pretty penny. and if i ever let it go it'll be for quite a bit less than $804

blackandbluesrt4 · Post by **blackandbluesrt4** » Wed Feb 17, 2010 11:45 pm

my bad. i meant the srt version. of course i don't have the polished version. i wish though.

BlackRoseRacing · Post by **BlackRoseRacing** » Thu Feb 18, 2010 5:54 am

Canada wrote:
BlackRoseRacing wrote: and this one of one(to my knowledge and research) is the only Non-SRT polished cat delete to be out there...

I should have hung it on a wall instead I:

^^^
Complete header back Mopar Performance Non-SRT 2 1/2" polished SS exhaust system

I got harrassed at work big time for this one, they asked why you would put a polished system on a car that you can't see the exhaust system....

Midnight_Rider · Post by **Midnight_Rider** » Thu Feb 18, 2010 9:37 am

Why? Because you know it's there, that's why. Good enough reason for me. Dang, that thing is beautiful!

Forest Green 2k · Post by **Forest Green 2k** » Thu Feb 18, 2010 2:00 pm

BlackRoseRacing wrote: got harrassed at work big time for this one, they asked why you would put a polished system on a car that you can't see the exhaust system....

Do they drive cars with exhaust systems on the exterior or something?

1972demon · Post by **1972demon** » Thu Feb 18, 2010 2:07 pm

Forest Green 2k wrote:
BlackRoseRacing wrote: got harrassed at work big time for this one, they asked why you would put a polished system on a car that you can't see the exhaust system....
Do they drive cars with exhaust systems on the exterior or something?

maybe they drive a little red express pickup

OB · Post by OB » Thu Feb 18, 2010 3:07 pm

Forest Green 2k wrote:
BlackRoseRacing wrote: got harrassed at work big time for this one, they asked why you would put a polished system on a car that you can't see the exhaust system....
Do they drive cars with exhaust systems on the exterior or something?

Hudson_Neon · Post by **Hudson_Neon** » Thu Feb 18, 2010 4:49 pm

i have my valve cover on my wall above my bed. makes a great decoration!

Swordfish2Cowboy · Post by **Swordfish2Cowboy** » Mon Feb 22, 2010 9:01 pm

LilSparkPlug wrote:Part hoarder. Not that I would know anything about that or anything......*whistles*

You're worse than I am.

I'll just leave this here.

smiley · Post by **smiley** » Mon Feb 22, 2010 9:40 pm

is that a special bumper or just an srt with the nostrils removed?

blackandbluesrt4 · Post by **blackandbluesrt4** » Mon Feb 22, 2010 9:45 pm

looks like either an srt-d, or god i hope it's not the original srt-4 bumper that they used for the concept.

Jeepin' · Post by **Jeepin'** » Mon Feb 22, 2010 10:29 pm

Srt-d is my vote.

And going back to Lilsparkplugs picture of the perferated hood on the first page, a buddy in my local car club actually has one on his SRT.

FAC3L3SS · Post by **FAC3L3SS** » Mon Feb 22, 2010 10:30 pm

Both wrong.

It's the original prototype bumper.

blackandbluesrt4 · Post by **blackandbluesrt4** » Mon Feb 22, 2010 10:34 pm

my wording=fail. that's what i meant ha ha.

FAC3L3SS · Post by **FAC3L3SS** » Mon Feb 22, 2010 10:36 pm

Ok. Then yes. You're right.

smiley · Post by **smiley** » Mon Feb 22, 2010 10:49 pm

FAC3L3SS wrote:Both wrong.

It's the original prototype bumper.

no shit, thats bad ass

blueneo03 · Post by **blueneo03** » Mon Feb 22, 2010 10:50 pm

FAC3L3SS wrote:Both wrong.

It's the original prototype bumper.

yup iirc the prototype bumper had the lip like the srt and the srt-d didnt...