Rare Parts

LilSparkPlug · Post by **LilSparkPlug** » Tue Feb 09, 2010 11:18 am

I had the Export tails at one time, just not on the car. I have the cargo net but haven't installed it, I have no trunk carpet :\. I could take a picture of it but I don't think that would help much if it's not in the car.

acr · Post by **acr** » Tue Feb 09, 2010 5:22 pm

This thread is awesome!

JeffB#2 · Post by **JeffB#2** » Tue Feb 09, 2010 6:38 pm

LilSparkPlug wrote:I had the Export tails at one time,

I just need to run wires up to the front under the carpet to get the turns to work. They have a good home now!

SlvrACR · Post by **SlvrACR** » Tue Feb 09, 2010 7:12 pm

thats not how u wire them. You cross two wires on mfs and tap into third brake light. There is a howto on here.

JeffB#2 · Post by **JeffB#2** » Tue Feb 09, 2010 7:30 pm

I looked. Hard. Find it, I couldn't.
1st Gen is easy, snip the yellow wire under the steering wheel at the top of the column. Brakes from center mount light. Split off the blinker and done. Half hour's work.

SlvrACR · Post by **SlvrACR** » Tue Feb 09, 2010 7:36 pm

Same thing with ours you just cross i believe blue and green wire. Ill look later, i used it on mine so i know its around

JeffB#2 · Post by **JeffB#2** » Tue Feb 09, 2010 7:47 pm

Good to know. I was going to finish that tonight but I'll put a 2.4 short block together instead. Heat is on in the garage, I have to get moving on a long list of things to do.

LilSparkPlug · Post by **LilSparkPlug** » Tue Feb 09, 2010 7:49 pm

JeffB#2 wrote:
LilSparkPlug wrote:I had the Export tails at one time,
I just need to run wires up to the front under the carpet to get the turns to work. They have a good home now!

I knew they would have a good home w/you

SlvrACR · Post by **SlvrACR** » Tue Feb 09, 2010 9:52 pm

viewtopic.php?t=22175
I knew I aswered this once before lol

JeffB#2 · Post by **JeffB#2** » Tue Feb 09, 2010 10:06 pm

Wonderful. Electrical is not my field of expertise. I can rebuild an engine in the dark, drunk and with one hand tied behind my back. I spent 2 hours looking at the service manual trying to find a way to do that, couldn't make any sense out of it. LOL! Thanks.

SlvrACR · Post by **SlvrACR** » Tue Feb 09, 2010 10:08 pm

Ya its really easy once you get under there. Ive done 3 of them

Jenni · Post by **Jenni** » Wed Feb 10, 2010 9:50 am

just made that blinker thing last weekend. easy!

mattern248 · Post by **mattern248** » Wed Feb 10, 2010 9:25 pm

Danteneon wrote:
Speeder wrote:is it there some type of grocery bag hang for in the trunk area i think Danteneon has them

I do

quote]

so is the trunk light hidden way up in there i have come across two in all the neons i have been in and own on my self very hard to come by

catalyst · Post by **catalyst** » Thu Feb 11, 2010 3:36 am

good parts in here

LilSparkPlug · Post by **LilSparkPlug** » Thu Feb 11, 2010 11:58 am

All three neons I've owned have had a trunk light.

blueneo03 · Post by **blueneo03** » Thu Feb 11, 2010 12:18 pm

mine didnt have a trunk light.. but it does now

blackandbluesrt4 · Post by **blackandbluesrt4** » Thu Feb 11, 2010 2:30 pm

tissues in the tissue holder? or someone actually being able to fit a cup into the "rear" cup holder without it falling out?

Danteneon · Post by **Danteneon** » Thu Feb 11, 2010 2:48 pm

I used to carry tissues in it

Never tried the rear cup holder...I need the armrest too much

blackandbluesrt4 · Post by **blackandbluesrt4** » Thu Feb 11, 2010 2:58 pm

well john, you're one of the few then. they even labelled it for us! people have used the cup holder when i was parked. i've had people ask where the cup holders were in the back and i just say "pass it up here." that cup holder sucks....

r/tguy02 · Post by **r/tguy02** » Thu Feb 11, 2010 3:01 pm

I've used both the tissue holder and the rear cupholder. Both work fine although the cupholder won't hold as big of a drink as the fronts

Danteneon · Post by **Danteneon** » Thu Feb 11, 2010 3:03 pm

I need to put tissuses back in there. Just cause I can (take that Honda!)

blackandbluesrt4 · Post by **blackandbluesrt4** » Thu Feb 11, 2010 3:08 pm

they get better flowing heads....we get.....TISSUE HOLDERS!

Danteneon · Post by **Danteneon** » Thu Feb 11, 2010 3:50 pm

My head flows just fine thankyouverymuch! Yay Magnum

I know what you mean though. But that was a "big" selling point when the 2nd gen was released. The Neon was chock full of "driver conveniences"

blackandbluesrt4 · Post by **blackandbluesrt4** » Thu Feb 11, 2010 4:02 pm

yeah yeah yeah. srt-4 heads FTL. and yeah, i guess YOU have more driver conveniences than me, but i'm working on it!

bone-yard-racing · Post by **bone-yard-racing** » Thu Feb 11, 2010 9:09 pm

2gn/SRT parts:
Mopar springs
acr seats
acr BBS wheels
non faded SRT injector cover

1gn parts:
Xhighs
acr rack (2)
uncracked DOHC exhaust manifolds
R/T wheels
radio delete pannel(s)
antenna plugs
door pannel clips

Turbo dodge parts:
Lbody Konis
MP autox springs
GLH rack
GLH fog lights and skirts

JeffB#2 · Post by **JeffB#2** » Thu Feb 11, 2010 10:18 pm

SlvrACR wrote:Ya its really easy once you get under there. Ive done 3 of them

Yes, this car had export tails before, I thought so. There were taps and connectors on the MFS. I could see them when I adjusted the tilt column down to the bottom. I'm guessing Jason had them at some point. However, isn't it normal for the side markers in the front fascia to blink? Doing it the way you wrote in that other thread, they no longer blink. Everything else works perfectly.

Mopar00Neon · Post by **Mopar00Neon** » Thu Feb 11, 2010 10:30 pm

JeffB#2 wrote:
SlvrACR wrote:Ya its really easy once you get under there. Ive done 3 of them
Yes, this car had export tails before, I thought so. There were taps and connectors on the MFS. I could see them when I adjusted the tilt column down to the bottom. I'm guessing Jason had them at some point. However, isn't it normal for the side markers in the front fascia to blink? Doing it the way you wrote in that other thread, they no longer blink. Everything else works perfectly.

Only on 1st gens. 2nd gen side markers dont blink, unless modded to do so.

JeffB#2 · Post by **JeffB#2** » Thu Feb 11, 2010 10:41 pm

I learned something new, hot damn, thanks. I would actually like them to blink, hard to see the front blinker from the side. Now I have one more minor thing to do someday.

I thought maybe I pooched something when I did the tails. I de-pinned the sockets as needed and used other pigtails to keep from cutting any wires. Electrical is not my friend.....

Mopar00Neon · Post by **Mopar00Neon** » Thu Feb 11, 2010 11:14 pm

JeffB#2 wrote:I learned something new, hot damn, thanks. I would actually like them to blink, hard to see the front blinker from the side. Now I have one more minor thing to do someday.

I thought maybe I pooched something when I did the tails. I de-pinned the sockets as needed and used other pigtails to keep from cutting any wires. Electrical is not my friend.....

I wish you were closer. I woulda just done it for you.

Jenni · Post by **Jenni** » Fri Feb 12, 2010 1:11 am

Danteneon wrote:I need to put tissuses back in there. Just cause I can (take that Honda!)

I would also - but tissues here in germany have a different size and won't fit.