Wiggy's ride/Matilda: Going Green
-
LilSparkPlug
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
- LionheartedSXT
- 2GN Member
- Posts: 905
- Joined: Fri Jun 06, 2008 12:34 pm
- Location: Orlando, FL
Gotta say man your car looks super clean and I can't wait for you to install that turbo!
-Chad
- Feedback
- Project LogMoxHair wrote:pay no attention to the man behind the curtain. Its all smoke and mirrors.
- Feedback
Slow to update, sorry. Got more fuel parts here (Dwerks 750's and returnline) and a new diaphragm for my AGP WGA (this is my third
). Finished up the IC sprayer and got it wired up with a WOT switch. The bottle is 21 years old (did not even know), so it's being hydro-static tested right now before a fillup. Can't wait to try it out. I also added a little reminder of the SRT's roots...

Here's Derrick of LCR helping me put the car back together. Yeah, he's 'tarded, but he's learned to live with his handicap


I'll get some more pics up later, including my "ghost" bracket for the CO2 bottle
PS, if anyone can find me a 1st gen Neon badge I'll reward you greatly! I've been hunting for one with no luck

Here's Derrick of LCR helping me put the car back together. Yeah, he's 'tarded, but he's learned to live with his handicap


I'll get some more pics up later, including my "ghost" bracket for the CO2 bottle
PS, if anyone can find me a 1st gen Neon badge I'll reward you greatly! I've been hunting for one with no luck
- sidepipe87
- 2009 Silver Contributor
- Posts: 9501
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
new or used 1gn badge? and do you mean "neon" font or the hood ram's head badge?
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
- sidepipe87
- 2009 Silver Contributor
- Posts: 9501
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
hmm.... I might have one. my dad snagged me a turquoise one when I was little. I'll have to look for itwiggyx wrote:The word "neon". Eitehr way is fine. I know they aren't very easy to remove without destroying them. I'm just gonna paint it though, so I don't care if it's light purple or pink or anything.
Adam, you already know I've done that!
- MyNeonSaysHi
- 2GN Veteran
- Posts: 11898
- Joined: Mon May 23, 2005 8:46 pm
- Location: Kansas
That dude is tarded, he is putting the wrong type of coolant in your car. 
I bought a used AGP S3 WGA and after a week or so I did a boost leak test and it was leaking like crazy. Supposedly the rod was bent and the diaphragm was bad. AGP fixed it for free. 3 times...damn.
Maybe go with ptp's unit? There is a local running it on his s3 setup and he likes it. (off PCM control)
I too plan on going return style soon. Too many inconsistancies with S3 system.
Are you going to remain on PCM controlled boost or off?
I bought a used AGP S3 WGA and after a week or so I did a boost leak test and it was leaking like crazy. Supposedly the rod was bent and the diaphragm was bad. AGP fixed it for free. 3 times...damn.
Maybe go with ptp's unit? There is a local running it on his s3 setup and he likes it. (off PCM control)
I too plan on going return style soon. Too many inconsistancies with S3 system.
Are you going to remain on PCM controlled boost or off?
08 Acura TL-S
05 Neon SRT-4
I'm off PCM. On the DTEC FC/BC
I got the AGP fixed once for free. I don't really get why they have so many issues (at least mine). LCR actually swapped the rod for me while it was there. It was slightly bent, so they tossed in a stainless part instead
The returnline is in and I've got a base tune on there now. Haven't had a chance to get on it yet. I'll post some pics in the next day or two. I've been slacking in that area
I got the AGP fixed once for free. I don't really get why they have so many issues (at least mine). LCR actually swapped the rod for me while it was there. It was slightly bent, so they tossed in a stainless part instead
The returnline is in and I've got a base tune on there now. Haven't had a chance to get on it yet. I'll post some pics in the next day or two. I've been slacking in that area
-
theTeejmiester
- 2GN Member
- Posts: 2107
- Joined: Thu Dec 20, 2007 5:05 pm
- Location: klamath falls oregon
Thanks guys!
dtjackten, It's a hodge-podge kit. I had the bottle from forever ago, so I had it re-valved for CO2. A buddy had some of the hardware sitting around, so I picked it up for almost nothing. Then I just needed to wire it up and add switches
I'll try and snap some pics of the lights tonight. I hastily wired them up yesterday cause I was just dying to see them installed. It's definitely mean looking
dtjackten, It's a hodge-podge kit. I had the bottle from forever ago, so I had it re-valved for CO2. A buddy had some of the hardware sitting around, so I picked it up for almost nothing. Then I just needed to wire it up and add switches
I'll try and snap some pics of the lights tonight. I hastily wired them up yesterday cause I was just dying to see them installed. It's definitely mean looking
-
LilSparkPlug
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
Finally got to the dyno and put a decent tune on it. Put down ~350 on a Mustang dyno. I'm pretty happy with it. Gonna get a high octane tune pretty soon. I've never even touched high octane mode on the turbo toys.
Also made a tranny/battery tray cover after relocating the batt (was running out of room in the engine bay).



Also made a tranny/battery tray cover after relocating the batt (was running out of room in the engine bay).














