How do i wire these to my side markers?
How do i wire these to my side markers?
Hey these are on my halo fogs but how do i wire them to my side markers?
-
ZeroChad
- 2009 Gold Contributor
- Posts: 3165
- Joined: Sat Sep 01, 2007 11:08 pm
- Location: Austin, Tx
- Contact:
Re: How do i wire these to my side markers?
With solder? loldub2333 wrote:Hey these are on my halo fogs but how do i wire them to my side markers?
Hook em up and try em out. If they don't work, you have the polarity reversed.
-
occasional demons
- Junior Admin
- Posts: 20067
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Next ?
Are you just wanting the Halo part, or the fogs also to come on with the parking lights? The halos, you could prolly just tap into the side marker wire. The fogs, I would use the side marker wire to energize a relay, and use a fused wire through the relay switch to power the fog lights. Otherwise you will have a melted MFS switch. Hell, the extra load of the Halos might melt the MFS. (They melt on their own sometimes)
Are you just wanting the Halo part, or the fogs also to come on with the parking lights? The halos, you could prolly just tap into the side marker wire. The fogs, I would use the side marker wire to energize a relay, and use a fused wire through the relay switch to power the fog lights. Otherwise you will have a melted MFS switch. Hell, the extra load of the Halos might melt the MFS. (They melt on their own sometimes)
Bill
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
Probably shouldn't listen to anything your penis says, that guy's a dick.
Too much time spent here is a sign of a bad case of Ownaneonvirus.Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap