i need rallies!?

gtxtreme19 · Post by **gtxtreme19** » Mon Feb 22, 2010 11:05 am

OK these^^^^ are what I want they were put on the 66 and newer mopar muscle cars. I have a set that are 5x4.5 from my big bolt pattern cuda but I know they made a set For the small bolt pattern 69- older cudas that was 5x4 anyone have a set or know if the are being repopped with the smaller bolt pattern?

1972demon · Post by **1972demon** » Mon Feb 22, 2010 11:23 am

wheel vintingue(sp?)

summitracing sells them as well.

and small bolt were used up to 72 on a-body's mopars

gtxtreme19 · Post by **gtxtreme19** » Mon Feb 22, 2010 11:36 am

Alright thanks! I checked summit and year one but maybe I imissed something.
Ill try wheel vintage (sp looks gooder)
Thanks for the info on the a bodies too. I had a 69 dart ( very very very rough) but mostly know 70+ e bodies

1972demon · Post by **1972demon** » Mon Feb 22, 2010 11:37 am

if you didn't notice the screen name i have a 1972 demon lol

gtxtreme19 · Post by **gtxtreme19** » Mon Feb 22, 2010 11:41 am

I have an offer right now to buy a 71-72 that is ugly green with black vinyl top 340 car for $800 im not sure on the condition or year but...
Me wants!!!

gtxtreme19 · Post by **gtxtreme19** » Mon Feb 22, 2010 12:03 pm

Thanks I found them on wheel vintiques they have plenty of options chrome OEM and what not im thinking 15x7 but their backspacing is 4-4.25-4.6 something will any of those work they are a rwd wheel after all. Any advice?

http://wheelvintiques.myshopify.com/pro ... -61-series

1972demon · Post by **1972demon** » Mon Feb 22, 2010 12:06 pm

i good guy to talk to would be laidneon, he just bought some smoothies for his car, im not sure on his offset and what not

INVUJerry · Post by **INVUJerry** » Mon Feb 22, 2010 3:50 pm

I think stock backspacing is 5" on a 6" wheel. If you get 15x7 with 4.6" backspacing, they make poke out a little.

Just plunked some numbers into here. Seems like they'd be around a 17 offset, they would definately be outside the wheel well.

gtxtreme19 · Post by **gtxtreme19** » Thu Feb 25, 2010 9:00 pm

Thanks website doesn't want to work on my cell im prolly going to use the 4.0 can anyone let me know how well that will work, im unsure about what size tires I do know coker red walls> sex so I will be using them

LilSparkPlug · Post by **LilSparkPlug** » Sat Feb 27, 2010 8:55 pm

They stick out too much.....I already went that route with Wheel Vintiques and they refused to make a wheel that fit the SRT-4. If you have a neon you may not have as much of an issue as your calipers are smaller up front, but I had a huge issue.

gtxtreme19 · Post by **gtxtreme19** » Sat Feb 27, 2010 9:06 pm

^^^this makes me very very sad. I have so much stuff ready to make a "vintage" neon I have paint (sublime and hot rod flats) classic go wing and barracuda style window cranks and door handles inner and outer and the Retro seats and a cuda rally dash as well as pistol grip(mtx) and t shifter (atx) all im looking for is the right wheel....

gtxtreme19 · Post by **gtxtreme19** » Wed Mar 03, 2010 4:04 pm

Alright so can someone school me on backspace vs offset? Our offset is 38mm right? Does that mean the mounting plate is 38mm forward (closer to the fender side than the caliper side) from the center of the wheel. Where as backspace is measured from the mounting surface to the back edge of the rim?

Where on a 15x6 for example 38mm offset is roughly 4.5in backspacing seeing as 38mm=1.5mm???

Sorry if im confused just trying to figure this out.

Edit: I just found this @

http://www.partsprovider.net/replica-wh ... -p-93.html

Offset= [backspace-(rim width)] /2

Soo, on the 15x7 with a 4.0 bs
[4-7]/2=1.5 or 38mm.

Would that fit my car?