hybrid's 1gn ---went to the track

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Mon May 24, 2010 4:48 pm

more tubbing on the pass side.

stance will be aquired

FAC3L3SS · Post by **FAC3L3SS** » Mon May 24, 2010 4:57 pm

Yes fuggin yum. I need some five spokes.

glasswars · Post by **glasswars** » Mon May 24, 2010 6:33 pm

God damn yes. 2 3mm spacers up front, 2 5mm out back?

ThrIsNoSpork · Post by **ThrIsNoSpork** » Mon May 24, 2010 6:37 pm

yummness.

j-king · Post by **j-king** » Mon May 24, 2010 6:59 pm

oh god just that pic looks sexy man

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Mon May 24, 2010 7:04 pm

glasswars wrote:God damn yes. 2 3mm spacers up front, 2 5mm out back?

2x 5mm in front, 3mm in back until i get extended studs for the rear.

BlackRT? · Post by **BlackRT?** » Tue May 25, 2010 4:41 am

those are gunna look hott! what do you think about some rota slips in a +20 15x8 on my 1gen.. Would i have to run a ton of camber to pull them off? I was thinking a 195 tire get a little stretch action need some advise from dirty low boys

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Tue May 25, 2010 5:34 pm

i think that would be perfect. i am running a 195 45 on a 7" wheel and it has a slight stretch. you are going to have to pull the fenders if you want to turn, just rolling left me able to turn the wheel 1/4 of a turn.

my wheels are 16x7 42mm offset. with spacers they are 32mm front and 39mm rear. the rears can be pushed out probably almost 1/2 an inch with a good fender pull.

INVUJerry · Post by **INVUJerry** » Tue May 25, 2010 6:24 pm

BlackRT? wrote:those are gunna look hott! what do you think about some rota slips in a +20 15x8 on my 1gen.. Would i have to run a ton of camber to pull them off? I was thinking a 195 tire get a little stretch action need some advise from dirty low boys

Run a 195/50/15 tire with them. You will probably need some camber, but not too retarded.

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Tue May 25, 2010 7:43 pm

well the wheel setup is on and im having some issues with clearance in the rear. The inner lip of the wheel is rubbing the tension strut.

Can i add some more camber to correct the problem, or will this do anything at all? I already have a 3mm spacer on and from what i hear you can't go larger on stock studs.

INVUJerry · Post by **INVUJerry** » Tue May 25, 2010 8:28 pm

You can go larger on stock studs just fine. I ran 8 or 10MM spacers with slicks on stock studs.

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Tue May 25, 2010 9:21 pm

well problem solved. I had to run 5mm spacers in the rear and 10mm in the front.

heydockyle · Post by **heydockyle** » Tue May 25, 2010 9:24 pm

Pictures?

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Tue May 25, 2010 11:16 pm

not yet

im making you guys wait for quality pictures tomorrow.

heydockyle · Post by **heydockyle** » Tue May 25, 2010 11:23 pm

Dam. The rims look sick in the teaser pic above.

glasswars · Post by **glasswars** » Wed May 26, 2010 12:26 am

Need moar content.

FAC3L3SS · Post by **FAC3L3SS** » Wed May 26, 2010 12:28 am

It's tomorrow.

glasswars · Post by **glasswars** » Wed May 26, 2010 12:33 am

Not in CA. :/

FAC3L3SS · Post by **FAC3L3SS** » Wed May 26, 2010 12:37 am

PISS.

BlackRT? · Post by **BlackRT?** » Wed May 26, 2010 5:00 am

hybrid-Srt2001 wrote:i think that would be perfect. i am running a 195 45 on a 7" wheel and it has a slight stretch. you are going to have to pull the fenders if you want to turn, just rolling left me able to turn the wheel 1/4 of a turn.

my wheels are 16x7 42mm offset. with spacers they are 32mm front and 39mm rear. the rears can be pushed out probably almost 1/2 an inch with a good fender pull.

from what i was reading i need to order those offset trailing arms from Vitor to get a 8inch wide rim to clear can anyone confirm?

srtjesse · Post by **srtjesse** » Thu May 27, 2010 3:27 pm

dude moar pictars of wheels on car please that looks so effin hot

INVUJerry · Post by **INVUJerry** » Thu May 27, 2010 7:15 pm

BlackRT? wrote:
hybrid-Srt2001 wrote:i think that would be perfect. i am running a 195 45 on a 7" wheel and it has a slight stretch. you are going to have to pull the fenders if you want to turn, just rolling left me able to turn the wheel 1/4 of a turn.

my wheels are 16x7 42mm offset. with spacers they are 32mm front and 39mm rear. the rears can be pushed out probably almost 1/2 an inch with a good fender pull.

from what i was reading i need to order those offset trailing arms from Vitor to get a 8inch wide rim to clear can anyone confirm?

Depends on the back spacing really. With the offset you're looking at, you'll probably be fine, since it has more back spacing than stock.

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Thu May 27, 2010 7:57 pm

1010tires.com has a good offset calculator. as long as it isn't too much further inward than stock you should be fine. I think with the 20mm offset they should clear.

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Thu May 27, 2010 10:27 pm

took some pictures today, then things went south, i hit a manhole cover while trying to get a rolling shot. The car needs a new k frame, pass control arm, and some fender work.

anyway on to the pictures

FAC3L3SS · Post by **FAC3L3SS** » Thu May 27, 2010 10:31 pm

Fucking delicious. Get those fenders squared away and obviously the shit that got bent and beat to shit today.

:):)

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Thu May 27, 2010 10:36 pm

doin work son. only reason its not fixed right now is cause the junkyard was already closed lol.

FAC3L3SS · Post by **FAC3L3SS** » Thu May 27, 2010 10:38 pm

Lol word. Don't change those wheels dude. I never realized how sex those wheels were until now. Keep em black. Or sell them to me. Rofl.

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Thu May 27, 2010 10:41 pm

yeah they have grown on me. I think the offset and stretch made them look this sick. rear needs more spacers.

heydockyle · Post by **heydockyle** » Thu May 27, 2010 10:43 pm

I thought they were gonna be white? Looks great regardless.

Sucks bout the damage tho.

hybrid-Srt2001 · Post by **hybrid-Srt2001** » Thu May 27, 2010 10:45 pm

they were, i had issues with the red powder from the last coating bleeding through so they went black.