lugs wont fit?

cbjones26 · Post by **cbjones26** » Wed Mar 24, 2010 8:09 pm

ok i bought dtjackten's primax 618 rims, i thought i was gonna put them on the car tonight to see if i like them or not, and the stock steel rim lugs will not go one these rims, i have tried searching but for some reason i cant fiind anything when i search, my search foo sucks.lol

any info would be great thank you

and yes i have sent him a msg but he hasnt responded yet

OB · Post by OB » Wed Mar 24, 2010 8:22 pm

You're going to need different lugnuts for use with allow wheels. They taper differently and are not interchangeable. Depending on the wheels, you can probably use stock alloy lugs.

cbjones26 · Post by **cbjones26** » Wed Mar 24, 2010 8:34 pm

will these work???

Click Me

Mopar_Korean · Post by **Mopar_Korean** » Wed Mar 24, 2010 11:33 pm

Thoes lugs you linked to will work but they wear out quickly. Eventually the key or nuts will wear out and you will get the key stuck in them.

You normally dont want to use stock lugnuts on aftermarket wheels. The tapers may be slightly different, the taper on the factory lugs may be damaged due to over torquing or gouged from being installed on a steel wheel. Or you run into the problem that you did were the shoulder of the lug nut is larger then the lug nut hole of the wheel.

I suggest getting these.

http://www.summitracing.com/parts/GOR-21133BC/?rtype=10

You can get them in chrome too.

cbjones26 · Post by **cbjones26** » Wed Mar 24, 2010 11:48 pm

ty ty. now im gonna have black rims, nothing on my car is gonna be chrome but do u think that the lugs should be chrome or black bc im thinking black lugs might be a lil too much black.
the center caps im gonna paint the same color white as the car when i paint it~!

Mopar_Korean · Post by **Mopar_Korean** » Thu Mar 25, 2010 12:02 am

If your going to paint the center caps white then get black lugs. I think black, white, and chrome is a bit to much.