Custom Emblems

pulmeova · Post by **pulmeova** » Fri May 07, 2010 7:23 pm

Has anyone ever ordered anything from this site.

http://www.24designs.net/

I orignally found them selling emblems on Ebay.

hansken_yo · Post by **hansken_yo** » Fri May 07, 2010 8:28 pm

A local guy here did and I will be here in the future. The work looked pretty good from what I saw.

Swordfish2Cowboy · Post by **Swordfish2Cowboy** » Fri May 07, 2010 9:53 pm

I will eventually.

sirvaliant_98 · Post by **sirvaliant_98** » Sat May 08, 2010 1:50 pm

thats where i ordered my snail boost front emblem, lol. I didnt realize though that the srt front and reg neon front emblems where different sizes so i had to trim mine down to fit my r/t grille. quality wise though so far seems to be just fine. I clear coated mine for added protection though.

pulmeova · Post by **pulmeova** » Sat May 08, 2010 4:01 pm

I just recieved an email back from the company. They said that they would size the emblems to whatever specification I needed. I think I'm going to give them a try.

SlvrACR · Post by **SlvrACR** » Sat May 08, 2010 4:13 pm

I have both the steering wheel and bumper emblem. Both he did a great job

mattern248 · Post by **mattern248** » Sat May 08, 2010 10:16 pm

same here i have the red mopar m with a black background and a same thing but black/ sivler for the sterring wheel very good quaility

z3roneo · Post by **z3roneo** » Sat May 08, 2010 10:37 pm

Might me a newbie question, but are the 00-02 front badge the same size as the 03+ neon/non srt??

mattern248 · Post by **mattern248** » Sun May 09, 2010 1:14 am

i believe the regular neon badges are smaller then the srt badge but not sure send me the messurements of yours and i will also take some of mine for comparision

z3roneo · Post by **z3roneo** » Sun May 09, 2010 1:38 pm

I know for a fact that the srt nadge is bigger than the non srt's..

Here's pics and dims of the 02 badge..

Height from the center is about 1 7/8"...

Width from the top is about 1 7/8"...

Width then narrows down to about 1 3/4" to the bottom..

I had this badge custom made a while back but was stolen...

It was made out of Aluminum with a vinly graphic on top.. It was originally for a Srt but the vender and I modified to fit the 02 grill..

I'm surprised no vendor has made badges for the non srt's.. I believe they would sell like hot cakes..

mattern248 · Post by **mattern248** » Sun May 09, 2010 3:09 pm

wow mine is way bigger(srt badge)

good product overall i like it

warphead · Post by **warphead** » Mon May 10, 2010 12:18 pm

i bought one from there about a year ago and the black plastic has already started to fade. if i were to get another badge i would spend the extra money and buy a billet one. and no, there has been no wax applied to my badge for the black to fade. also had to email him a few times before he actually shipped the badge.

mattern248 · Post by **mattern248** » Mon May 10, 2010 3:22 pm

oh see i had a good dealing with them. plus i left my bagde on ym back porch for like two weeks and arizona is not a good state for paint and it seems fine but i want it to have a even deeper look so i will be clearing mine a few times

warphead · Post by **warphead** » Mon May 10, 2010 4:24 pm

see there is no paint on mine at all, it is a piece of black plastic that has a brushed texture on it with a decal laid over it.

SP33DN3ON · Post by **SP33DN3ON** » Mon May 10, 2010 7:33 pm

A friend of mine got the Chrysler emblem MADE with these guys, and refered me to them. I was sending them e-mails to find out how much would cost to make one and the guy who wrote me back said that they never done a "custom emblem" for anyone.
Just saying.

heydockyle · Post by **heydockyle** » Mon May 10, 2010 7:53 pm

It says right on there website to email them that they can make custom emblems.

SP33DN3ON · Post by **SP33DN3ON** » Mon May 10, 2010 7:58 pm

heydockyle wrote:It says right on there website to email them that they can make custom emblems.

Well the guy said that he cannot make a Chrysler emblem for the Neon, but he did already.. so IDK.

lilnicko11 · Post by **lilnicko11** » Tue May 11, 2010 8:55 pm

the 00-02 and 03-05 are different sizes. i got one and had to grind down the edges for the perfect fit. but now its great on my 02 ACR. I have the superman one.

z3roneo · Post by **z3roneo** » Tue May 11, 2010 11:44 pm

Thanxs nicko, thats the answer I was looking for..

I'ma have to pick one of these up soon...

lilnicko11 · Post by **lilnicko11** » Wed May 12, 2010 12:01 am

No problem. I believe when I originally purchased it, the site only had 03+. not sure what they have no. My dad has a grinder in the garage. We didnt do the sides but like the underneath of the slides slightly.

SlvrACR · Post by **SlvrACR** » Wed May 12, 2010 7:02 am

warphead wrote:see there is no paint on mine at all, it is a piece of black plastic that has a brushed texture on it with a decal laid over it.

Mine has no vinyl. You either got an old one or diff guy

warphead · Post by **warphead** » Wed May 12, 2010 11:45 am

SlvrACR wrote:
warphead wrote:see there is no paint on mine at all, it is a piece of black plastic that has a brushed texture on it with a decal laid over it.
Mine has no vinyl. You either got an old one or diff guy

exact same guy because when i bought it, he had them on ebay also but they were more expensive so i bought it from the site. here is a link to the exact one i bought and if you look through it the description it says "These badges are laser engraved plastic, with brushed aluminum." and the aluminum he is talking about is a brushed aluminum appearance vinyl.

http://www.24designs.net/index.php?main ... ucts_id=10