Adding power locks/windows to a manual model

bernaserra · Post by **bernaserra** » Mon May 17, 2010 12:51 pm

I've asked this question elsewhere and received mixed answers, if anyone here could clear this up I would appreciate it.

I was wondering if a neon with manual windows/locks still have the hook ups for a door with electric windows/locks. Say I wanted to install a door with power windows into my 00 neon with a manual setup for example. Are the connections there but not used? Or not there at all?

Jenni · Post by **Jenni** » Mon May 17, 2010 2:38 pm

find a neon on the junkyard and take its complete doors and the harness from the doors to the fuseboxes. as much of the harness as you can grab!

LI NEON 72 · Post by **LI NEON 72** » Mon May 17, 2010 2:48 pm

No they dont. I'm in the middle of doing this right now on my 00. Your going to need everything in the front doors along with the wiring. You will need the dash harness along with the interior body harness and the rear door latches and wiring. Its really not that hard but i wouldn't use an srt as a donor. Try to find one around the same year so you dont have to swith wirring around in the main harness connection. Im going to do a write up on this when im done.

bernaserra · Post by **bernaserra** » Mon May 17, 2010 2:59 pm

[quote="LI NEON 72"]No they dont. I'm in the middle of doing this right now on my 00. Your going to need everything in the front doors along with the wiring. You will need the dash harness along with the interior body harness and the rear door latches and wiring. Its really not that hard but i wouldn't use an srt as a donor. Try to find one around the same year so you dont have to swith wirring around in the main harness connection. Im going to do a write up on this when im done.[/quote]

Thanks that sounds good, I think I am only doing the front doors. I may get to it this Wednesday, if not I look forward to your write-up.(Pics please)